Why can't you simply do what I asked you????? Please enter the above command in telnet and post the output.
crash dm900
-
-
You never answered my questions
First:
Did you conect your DM900 with an USB cable (Miniport on the DM900)?
If so: can you connect to the DM using putty WITH A SERIAL connection?
Please post you putty settings.The login/ifconfig will only work with the serial connection...
-
First
i conect with USB cable (Miniport on the DM900).
Second
DM using putty WITH A SERIAL connection - com4 (115200)
Please post you putty settings - above.
Defekt in DM900...kaput or no - write later -
I give up. You're unable to provide sufficient information. Good luck.
-
Hi asdas11,
I understand you frustration, but you need to understand the people who are trying to help you need exact description of each step you are doing.
Can you make some screenshots of your putty config and every step you do and upload them?I think the culprit of your issue to connect to the box is the following lines
Codesh: cannot set terminal process group (-1): Inappropriate ioctl for device sh: no job control in this shell
regards
PiGeon
PS: could you ask someone with better English or German to describe it for you?
-
Thanks,
PiGeonfirst i prefere english, and - can - italiano, polish, russian, lithuanian...
Today DM900 i send for my seller, costly and longtime, but ....
Screenshots i now i can't to do...
1. sh: contact is but - Inappropriate
2. minimal job in this shell... function command help...some df -h..
can't do command - echo "rescue" >> /proc/stb/fp/boot_mode && reboot -f -
Hi,
I sent my DM900 to ...and 10 days ago i received new DM900 - all things works ok...super -
mine shows this boot log , any help
Dreambox DM900
AVS init...
AVS init OK
AVS load:select_image: addr_offset: 00051000
part_offset: 00000000 bootStatus: 2a2f2b00
AVS load_code offset =00051000
LOADED
AVS: overtemp mon ON
single boardMEMSYS:0000002f
FATAL ERROR: Boot 2nd image failed
. -
This is a hardware failure. You should return it to your dealer, or open a ticket on the dreambox.de website.
Sorry forf the bad news.
cu
-
Depending on the state of the box, there might be a posibility to reinstall the rescue loader via the serial console. The DMM devs gave some documentation for that in the board (use the board search for "Pumpkin").
Hi mOrphU,
Can you please send me the link on how to reinstall the rescue loader via serial console?
-
Hi mOrphU,
Can you please send me the link on how to reinstall the rescue loader via serial console?hier is the thread
NUR Ausrufezeichen -
Wyłącz urządzenie zasilania i kliknij przycisk zasilania na pilocie, dioda LED powinna migać niebiesko-czerwono, zachowaj, aż DREAMBOX i wykrzyknik nie spodoba się, a następnie zwolnij palec na około 5 sekund.