Hallo,
habe leider ein Problem...
Versuche nun seit 2 Stunden ein Bootlog bei meiner DM7020HD zu erstellen von einem Linuxsystem aus.
Wenn ich versuche Putty zu starten bricht es mit einem Fatal error ab.
versuche ich es mit diesem Befehl:
Erhalte ich die Medlung das keine "R / W Berechtigungen" vorliegt und wird auch beendet.
Die Box ist mit einem Mini-USB Kabel verbunden:
egle@core2quad:~$ ls -la /dev/ttyUSB*
crw-rw---- 1 root dialout 188, 0 Sep 22 14:08 /dev/ttyUSB0
ein dmesg gibt mir folgendes aus:
egle@core2quad:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.0-30-generic (buildd@roseapple) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #44-Ubuntu SMP Thu Aug 22 20:52:24 UTC 2013 (Ubuntu 3.8.0-30.44-generic 3.8.13.6)
......
[ 4.963932] [drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 0
[ 5.000657] usb 4-1: New USB device found, idVendor=10c4, idProduct=ea60
[ 5.000662] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.000664] usb 4-1: Product: Dreambox DM7020HD
[ 5.000665] usb 4-1: Manufacturer: Silicon Labs
[ 5.000667] usb 4-1: SerialNumber: BA0516100001125
[ 5.244041] usb 8-2: new low-speed USB device number 2 using uhci_hcd
[ 5.360114] firewire_core 0000:04:06.0: created device fw0: GUID 009027000255194e, S400
......
Alles anzeigen
Also ist die Dreambox ja verbunden und wird auch erkannt...
Also dachte ich es kann dann doch nur an den Bios Einstellungen der Dreambox hängen?
Aber nachdem ich nun wirklich alles versuchte, komme ich nicht mehr weiter.
* Hatte die Default-Werkseinstellungen geladen und probiert
Boot Order �
� �
� Enable Prerun [ENABLED ] �
� Try Default Boot Sources [ENABLED ] �
� �
� Primary Boot Source flash [ ] �
� Secondary Boot Source tftp [ ] �
� �
� Alternate Boot Sources �
� �
� Alternate Boot Source 1 tftp [ ] �
� Alternate Boot Source 2 usb [/autoexec_dm7020hd.bat ] �
� �
� Change Command Line [DISABLED] �
� Kernel Command Line [console=ttyS0,115200 ip=dhcp root=/dev/nfs rw ] �
� �
� Poweron Behaviour �
� Powerstate after AC loss always on �
� Enable USB support [DISABLED] �
�������������������������������
Alles anzeigen
* Hatte die Kernel Commandline mit den Einträgen aus dem Dreamvboxwiki von Reichel probiert:
console=ttyS0,115200 root=/dev/mtdblock3 rootfstype=jffs2 rw
console=ttyS0,115200 ubi.mtd=root root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync
Jedoch klappt die Verbindung weder per Konsole noch mittels Putty....
Jemand evtl. noch eine Idee wie ich das evtl. hinbekomme oder was ich falsch machen??
PS: Achso image ist das neuste Experimental drauf, also sollte es ja eigetlich mit diesen Eintrag gehen:
Sagt mir zumindest die Telnetausgabe:
opendreambox 2.0.0 dm7020hd
dm7020hd login: root
root@dm7020hd:~# mount
rootfs on / type rootfs (rw)
ubi0:rootfs on / type ubifs (rw,sync,relatime)
devtmpfs on /dev type devtmpfs (rw,relatime,size=158496k,nr_inodes=39624,mode=755)
none on /proc type proc (rw,nosuid,nodev,noexec,relatime)
none on /var/volatile type tmpfs (rw,relatime,mode=755)
sysfs on /sys type sysfs (rw,relatime)
none on /proc/bus/usb type usbfs (rw,nosuid,nodev,noexec,relatime)
/dev/mtdblock2 on /boot type jffs2 (ro,relatime)
/dev/ubi0_1 on /data type ubifs (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)
automount(pid498) on /autofs type autofs (rw,relatime,fd=4,pgrp=498,timeout=5,minproto=2,maxproto=4,indirect)
automount(pid551) on /media/net type autofs (rw,relatime,fd=4,pgrp=551,timeout=5,minproto=2,maxproto=4,indirect)
root@dm7020hd:~#
Alles anzeigen
Vielen Dank auch im Vorraus