Hi all, with new dvb drivers, dreambox-dvb-modules_2.6.18-7.3-dm8000-20100623 the scart switch no longer works. Probably this behaviour was intoduced with dvb driver dated 28-05-2010, latest version that surely work was dreambox-dvb-modules_2.6.18-7.3-dm8000-20100413-r1 .
With latest dvb modules drivers the scart switch does not work, when you put in standby the receiver the scart pin does not release the power and does not switch to tv channel.
This was an old bug reintroduced. I hope it will be solved in future release of dvb modules drivers.
I tested this with 2 different scart cables (with all 21 pin connected) and with 2 different tv. Same behaviour and scart does not switch in automatic to the tv when you put in standby the receiver.
With old drivers it was ok.
Problem with new dvb-modules drivers
-
-
Hi,
i cant reproduce this. I have tried it with my TV .. and i have measured it with a Voltmeter. All seems okay here.
When i put the dm8000 into standby my tv switches back to tv.
cu
-
Hi,
i cant reproduce this. I have tried it with my TV .. and i have measured it with a Voltmeter. All seems okay here.
When i put the dm8000 into standby my tv switches back to tv.
cu
Sad to read this .
With my 8000, when i put it into standby, the tv remains in au (or av) channel, so black screen.
I have to manually press the channel button on the remote control to get back on the tv channel .
It's strange if this happens only to my (2 ) tv. Maybe a problem on my 8000 ?
But with old driver (April) all works perfectly. -
dont have problems too with my dm8k -> SCART -> Sony KV-29c3d(CRT)
when send dream to standby then tv stays on last used tv service or av source
check your A/V Settings -
dont have problems too with my dm8k -> SCART -> Sony KV-29c3d(CRT)
when send dream to standby then tv stays on last used tv service or av source
check your A/V SettingsI see in your A/V settings "Auto scart switching" set to disable. Is this the right setting ? I've tried with "enable" because i thought the scart autoswitching works with enable and does not work with disable. If you set enable the behaviour is the same or changes ?
-
changed to "Enabled", nothing changes - all ok as before
can you chech what voltage comes on pin 8 of scart
-
Test and se if this update in OE solves your problem.
http://git.opendreambox.org/?p…ac7a11fc8976da360df43e1bcudev_124.bb: add missing /dev/dbox/fp0 for dm8000 (needed for auto vcr scart switching)
-
Test and se if this update in OE solves your problem.
http://git.opendreambox.org/?p…ac7a11fc8976da360df43e1bcudev_124.bb: add missing /dev/dbox/fp0 for dm8000 (needed for auto vcr scart switching)
Thanks, i will try soon. How can i insert this change and where ? By editing manually which file ? Thanks in advance.
-
You just have to install the latest experimental-image and reboot your box.
-
You just have to install the latest experimental-image and reboot your box.
Unfortunately, i've tried the latest experimental image 20100821, but the problem still there, no scart autoswitching, it does not work.
-
Do you use the 1.5 or the 1.6-tree?
-
Do you use the 1.5 or the 1.6-tree?
1.6-tree