I received my new DM-7025 yesterday. I installed it, quickly tested it and was quite disapointed: Compared to what I saw on the DM-7020 user manual, 7025 User Manual and OSD menus seems to be quite simplified! But things appeared to work fine.
So, I decided to flash the unit with the last firmware (dm7025_20060116_3.nfi) that I downloaded to my PC. When I stopped the boot process, (pressing on the front panel 'Down' key), I could not get an IP address. The messages 'dhcp...' and '*** STOP ***' were displayed but no address was found. I tried many times and finally it worked, I don't know why!
So, I finally flashed my unit through my PC browser. Apparently, everything worked well, 100% of the flash process was completed and the message on the left of the progress bar indicated 'finished'.
So, I turned off the unit and restarted it.
However, since that moment, I have 2 problems:
1) The DM-7025 refuses to boot. At first, the LCD displays the message 'BOOT #41 20060116'. Secondly, it displays 'dhcp...' and '/flash/vmlinux.gz' and, after a moment, it displays nothing anymore but stays illuminated. If I wait, nothing happens, even after 5 or 10 minutes, and I cannot turn the unit off using the unit's 'Off' button!
2) When stopping the boot process, I cannot obtain an IP address. The messages 'dhcp...' and '*** STOP ***' are displayed but no address is found!
Help would be welcomed! I saw some threads that seems to concern this subject but I don't understand German!
Thank you in advance!