DM520HD
The problem to the peak shown in pictures.
Please reply in English
DM520HD
The problem to the peak shown in pictures.
Please reply in English
And what's the problem exactly? Box won't boot? No rescue mode available?
Yes there is a problem when opening the browser does not recognize the receiver
Again, extremely vague..
The box has an IP address when connected properly (and functioning).
When you type in this address in your browsers address field, you shoud get the WebIF page from the dreambox. This shows programm info en offers Web control, streaming/zapping etc.
If you expect to flash your box you must enter rescue mode to bring up the Recovery WebIF. This is done by:
-running the original DreamOS 2.x, press MENU, shutdown submenu and select Recovery Mode (whatever language you may have selected)
-turn off the box completely with the rocker switch on the back. Wait a few seconds and reapply power and AS SOON as the foil button turns red press the foil button and keep pressed until the red/blue flashing stops and displays in steady red. Then use browser to flash new image
and if you fail miserably there is still dBackup Plugin for Backup & Flashing
Yes, but that won't do much good if the box doesn't boot. dBackup is an extension..
Noone said it's not booting. He only says he can't access the rescue loader.
If you use dBackup PROPERLY it will boot after Flashing. And both current enigma2 and when dFlash is installed even the normal e2 webif (near Power) will have a boot to rescue option so the need for writing things in /proc in telnet is very rare.
The reciver does not function only on a red light bulb.
As you see the pictures the dcc140 works perfectly.
@Guteminu @'dre
Also Box bootet nicht! dBackup ist dann noch nicht da. Weiss nicht ob schon ein Sicherheitskopie existiert. Sonst einfach frisch installieren und dBackup installieren.
So far no one is giving the correct solution
The receiver does not work permanently just gives a red light
Please see attached pictures for the first participation