hi all good people
got my dm900 got a problem flashing the box when i put the box on rescue mode don't show the ip on screen or on LCD
can anyone help
thankyou for your great work
DM900 don't show ip?
-
-
Does pulling the hdmi cable help?
-
thanks Reichi for your kindle reply
no luck did pull the HDMI cable still no IP show hope some time will be fixregards
-
So do you have a DHCP Server on your network? That's mandatory for getting an ip...
-
hallo reichi,
ich klinke mich mal mit ein:
ich habe gestern auf den rescue-loader vom 12.12.16 upgedatet und das gleiche verhalten: ip wird weder am tv, noch im lcd-display angezeigt!
da ich aber noch ein lease hatte, konnte ich die box mit vorheriger ip im browser ansprechen.
box ist mit statischer ip in der range eines dhcp-netzwerk.
mit dem rescue-loader vom auslieferungsimage, funktionierte das noch.
-
no I haven't a DHCP Server on network I did assigned a IP on router so the box will get always the same IP
-
-I have a same problem....
-
I think this problem appears only with rescue loaders built between December 8th and December 20th. It should be fixed from December 21st on.
As far as I know, none of these builds were used as factory images, so I expect you to be familiar with updating the rescue loader.
-
witch way to install on Dreambox,with USB .....
-
1.) Do an online update or flash the latest image (unstable: December 22nd; stable: December 23rd).
2.) Boot to enigma2.
3.) From telnet or ssh run:If you don't know the IP address for flashing, choose one of the following:
A.) Boot to enigma2. Get the IP address from the menu. It will most likely be the same inside the rescue loader.
B.) Connect a USB cable to the service port. Start a terminal emulator like putty, minicom or hyperterminal on the virtual serial port (115200, 8N1). Login as user root, no password. Run /usr/sbin/help. It will show the IP address.
C.) Ask your router. -
-When i changed router , evrething i fixet.
Best regards.