Loss of DiSEqC signal in OE2.0

  • Since I have converted from OE 1.6 to OE 2.0 few weeks ago, I noticed that the signal is lost for switching between channels from different Satellite (after 24 hours from a cold reboot). The problem does not get resolved till I reboot my DM800se, then all alright and the signal is gained again; but, only for another 24 hours. So far, to prevent this problem, I'm rebooting my dreambox once a day or whenever I see this problem starts.


    I tested OE 1.6 back and it was ok for days and days....the problem occurs only with OE 2.0 - please look at and fix.


    Thanks,

  • yes, there is some problem, especialy with cascade(tree 10x1 SW101D(1.1) behind single 4x1(1.0)) doesnt work at all


    with[Moderator] Image is in violation of the Boardrules [/Moderator] on dm8k-beta didnt get signal from any of 23x LNBs neither Terrestial
    didnt have enough time to make deeper investigation, rulled back to last[Moderator] Image is in violation of the Boardrules [/Moderator]


    maibe some expert can see what NN2.oe2 dint like in my LNB settings

    Receivers: dm920sstsst; dm900sst; dm8000sstt <-Diseq1x4(1.0)<-3x Diseq1x10(1.1)<-
    Dishes:
    1.8m + 42E;36E;28E;23E;19E;16E
    1.6m + 13E;10/9E;5E;1W;8W
    1.6m + 75E;85E
    1.1m + 53/55E;60E
    1.1m + 12W;18W;24W
    1.0m + 15W;22W;30W
    1.0m + 7E;4/5W
    TVs: Philips 46pfl9707s; Philips 42pfl9703h

    Einmal editiert, zuletzt von floh ()

  • Here I am after 2 weeks and not a single feedback from DMM....are you in holiday or something for the summer?
    I though DMM technical support would be prompt.

  • This is (and EVER was) a "user helps user" forum.
    If you really need support from DMM, open a ticket in the DMM ticket system
    and don't blame us (the users).

    DM900 SS, DM8000SSSS
    Kein Support per PN! Nutzt das Forum zum Fragen, dann haben auch andere etwas davon.