I have image release 3.0.1 and when i enter my IP address in IE i get the dreambox webcontrol with the following options: Televeision, Radio, Extras, Tools but i don't see the "firmware upgrade" box as it is described. I need to flash with another image. Please help.
Flashing DM800 SE with Enigma II
-
-
Please read in your User manual, or Flashing a new firmware.
-
Please read in your User manual, or Flashing a new firmware.
Thank Schnubbel. I follow the same instructions. The webcontro interface I get is different from the one shown. It allows me to manipulate TV and radio list etc but not box for "firmware upgrade. -
then you did not follow the instructions
ZitatPower down the Dreambox, either using "shutdown" and by switching off by the power switch.
Standby is not enough!- (1.) Press and hold the power button.
- (2.) Switch on your Dreambox.
- (3.) Your Dreambox will get the next free DHCP IP address from your router.on the Display of the box should be like this
-
you are not in "stop" mode. maybe some usb stuff is still connected?
-
Here is what I get as an IP in STOP mode
-
this is ok and in this mode type the ip adress shown in the diplay into your browser (better not ie) and then you'll see the webif from the bootloader.
-
I used both IE and Google Chrome and get the same attached webcontrol. Please help.
-
Your box is already booted, so obviously you aren't following the instruction.
You HAVE to press the button at the box BEFORE switching it on and HOLD it.WHEN in Stop mode you will definetely find the described interface to flash the box.
Your screenshot shows the default webinterface which is used for remotely controlling enigma2.
-
try to press CTRL (Control) and F5 to reload the page.
-
Thank you guys. problem solved. I was inputting the IP address after reboot and NOT while in STOP mode. The issue now is after finding the nfg file, I get the following message : "IMAGE FOR WRONG ARCHITECTURE"
-
you have to use firmware what is designed for the DM800se - nothing else - maybe you have to extract Zip files to get the .nfi File for flashing.
-
An original current DMM Firmware and Plugins are here on dreamboxupdate.com
-
I have image release 3.0.1 and when i enter my IP address in IE i get the dreambox webcontrol with the following options: Televeision, Radio, Extras, Tools but i don't see the "firmware upgrade" box as it is described. I need to flash with another image. Please help.
********************************************************************************
i had the same problem with the internet explorer and
tried the firefox browser and it works first class everytime
this seems to be far faster than the internet explorer