I have suggested before that the Flash Tool should not have the Backup and restore option marked as default.

Normal users will of cause not fiddle with anything expecting that the default is the correct way to do it.

When you need to flash a new image it's almost always because you have wrecked the one you use at the moment

So to have those settings as default is not a good option and should spare regular users from lots of problem

So if you can get back into rescue mode chris19 Flash the newnigma2 image but this time make sure you

un hock both the backup and restore check boxes before pressing "Go" to flash the image.

ooops sorry did not read the post proper

If you are using Windows on your PC just open Windows Explorer >> Network >> your dm920

Now you should see your root folder and your HDD and you should be able to transfer and edit files

Well dre and Sven H the log is full of threading issues even if they somehow just come up as Warnings.

But any unsafe threading will render a crash. But dre is probably correct that it's something more then one plugin involved otherwise this plugin would crash every time it's used.

Since the universal language is not German among most users I translated the very nice "How to make a bootlog" to English for none German speaking users.

You find it here: How do I create a bootlog

Try and create a bootlog in that way it's easier to figure out what is going on.

Turn off the box with the power button switch in the back of your dmtwo

Now in the front top over the lcd screen press and hold the small button pressed while turning on the power switch in the back.

Hold the button until you see the orange light. Also you will have information in the small lcd screen telling you the box is in recovery mode.

now open your web browser and type as below to enter the recover/flash tool

http://dreambox.home

Now do an online recovery but very important!!!!

Uncheck both options for backup and restoring settings before you press Go!!!

I am the worst skinner and developer so i restart reboot my boxes up to 100 times a day when i work at something and have never hade any data lost or strange light blinking.

I practical abuse my dreamboxes with bad programming and skinning so this "bug" must be very rare??

Also all my boxes is set to go into deep standby after idle for 3 hours and they all start just perfect with the remote or button press.

I assume that with GUI restart your box goes black and not starting proper.

But most of the time network still works so you can connect with telnet and ftp.

So try and connect to your box with telnet and just manual run enigma2 to get the crash info in the terminal window

If you now how to create a bootlog that is still the best option

If you never used telnet with DCC or Putty and don't now how i can guide you through the steps

No it's not usual to regular customers to do an update with telnet. But it's good ide when something goes wrong.

Also what's helpful is if you give some info about what image you have installed. And since you are using gemini plugins i can guess it's the dm unstable with GP4 addon.

So how to get the info. Yes a bootlog is always nice but sometimes a bit complicated so let's start with telnet.

Open a Telnet connection with Putty or DCC and then just do a new update.

 apt-get update && apt-get upgrade

If you any errors just post them here.

Now also run the command to see if there is some dependency issues

apt-get install -f
Restart GUI when done
systemctl restart enigma2

Still no luck just type enigma2 in your telnet command prompt and you will get a crashlog in your telnet window

Mark all text then press CTR+C to copy

Now you have it all in the clippboard of your computer so just paste the text here and post it.

Best of cause is to create a bootlog file

No matter what opinion people have i must say that I am stunned in the way conversation goes on. Name calling and bulling and it's like red thread through this forum.

But what surprise me the most is the lack of Staff intervention ??? Where is the Moderators and Admins ?? It does not matter if you agree or disagree about a topic or opinion.

The constant name calling and the bulling of Forum members can not continue. Disagree and debate should have i high tolerance and we should disagree sometimes and hopefully agree sometime

But this most be done in a civil manner. We all have agree to "terms of use" for this forum! Read them again from time to time.

Respect each other. Respect all Developers hard work, Don't forget that we all have been newbies and not all will be geniuses.

No = No & Yes = Yes

If I understand this correct gutemine had no other choice but to close the feed and post nr 22 should have been deleted by the forum admins / moderators longtime ago no matter what opinions anyone have.

Well looks like e2 lives and doing well on all my boxes

High or low bitrate have nothing to do with CI+ it the same use with Cams run in legacy mode.

There is no license issue if your Cam works in legacy mode. You stil need the option to run the Cam in High Bitrate

Why this option does not show with the dm525HD i really don't now but i change my default settings to "yes" in the CI.py file and it works for me

My Cam is a Strong Conax Cam.

Really nice this new style and I agree with Reichi this match the Dreambox colours so good work by the staff : thumbsup:

If you say it's OK then I agree with you

This fix by you should also be patched into the git

Beitrag

RE: Krogoth branch not possible to build anymore

You habe to adjust it in /bitbake/lib/bb/fetch2/git.py

Line 277:
%s branch --set-upstream %s origin/%s
Change to
%s branch --set-upstream-to origin/%s %s

dre

30. April 2021

That would be nice but do you really think this is the correct way to fix this??

I am thinking that yes it's working you can build the images but maybe it will bite us in the ass later  

This is how i solved my build but if you have added the python-pip_8.1.2.bb i posted in this thread you can restore the original setup.py when you have gone through the first build for armhf and mipsel32

and all works fine. You only need to run the modify setup.py for one armhf and it works for both same with mipsel32

If you run the modify setup.py for ex dm520 then you can run all other mipsel32 machines without any changes

You can also build on any linux distro of your choice, even the linux distro for Windows 10

And i agree this is a temp fix and it is a dirty fix but since no one from DP have provided any solution this at least makes the krogoth possible to build

What machine are you trying to building Teddy01 and have you try to build the regular way not with docker ??

Just to a quick restart of gui and all works just fine djakac9

I have another issue i need help to figure out

Everything works just fine but in the channel list i get the foregroundColorServiceNotAvail color on all channels except the ones on the same transponder when i change templates.

If i restart Gui all works just fine. This is no big problem

Dreambox One/Two DP latest experimental image in use and latest version of the plugin with the updated plugin.py file