Serious problems with new DM500-S with BSBE1-706A Tuner

    Setup:
    New DM500-S with the following details:
    * Tuner: BSBE1-706A.
    * Board: Version 7.0 marked "06 11 DN500S".
    * Dream Hologram on bottom side.
    * New small silver remote.


    Connected to 4 LNB's (19.2E, 13E, 5E, 1W) trough a diseqc switch.


    Loaded Image: rel109-20060803.img.


    The box has scanned all satellites for free-to-air services.


    Problem:
    When I swap from a service on one satellite to a service on another satellite, there is a delay of 10sec to several minutes before the box starts to display any channels. In the meantime there is an on screen message (named "switch") saying: "Service could not be found".
    The problem is less frequent if I swap rapidly between services on different satellites. But the problem is back at the first service-swap after staying with the same service for a while or after a stand-by period.


    Debugging:
    * Another DM500-S from the same shipment shows the same problem.
    * My DM7020 works fine with the same setup.
    * I have also tried other Diseqc switches and LNB's - same problem.

    Does any of you have any explanation (Or a fix :D) for my problems?


    Thanks / Red_Eric

    Hi, I have the same problem but nobody can help us.


    like 12129 V 3/4 27500 on astra 19°2E (A LA CARTE) not working "service couldnt be found".


    I think is a problem with tuner but I have same problem for 4 new DM500.


    If I test my twin lnb with my DM7000 and DM7025 no problem, I can work with those.


    Best Regards,
    Sounyous

    PLEASE SOME ONE HELP



    I HAVE 4 SATELLITE WITH DISQUE SWITCH



    13E -19E- 28E- 9E



    EVER THING WAS GOOD BUT AFTER FLASH WITH NEW [Moderator] Image is in violation of the Boardrules [/Moderator] ALL OTHER 3 SATELLITE WORK FINE



    ONLY ON HOTBIRD 13e I GET PROBLEM.....HALF ON CHANELS ARE LIKE THIS



    "SWITCH Service could not be found"



    I FLASH WITH 4 DIFRENT IMAGE AND I CHANGE 3 NEW DISQUE SWITCH EVEN I TRY A NEW 12V 3MA POWER SUPPLY



    BUT PROBLEM IS SAME



    PLEASE SOME ONE GUIDE ME HOW TO FIX THIS PROBLEM




    can we use 15 volt supply for dm500 to fix the problem

    Einmal editiert, zuletzt von floh ()


    It is a Dreambox clone!
    Get a genuine Dreambox, and your dreams will come true :winking_face: