Beiträge von red_eric

  • DM500-S shows "Service could not be found"

    Setup:
    New DM500-S with the following details:
    * Tuner: BSBE1-706A.
    * Board: Version 7.0 marked "06 11 DN500S".
    * Dream Hologram on bottom side.
    * New small silver remote.


    Connected to 4 LNB's (19.2E, 13E, 5E, 1W) trough a diseqc switch.


    Loaded Image: rel109-20060803.img.


    The box has scanned all satellites for free-to-air services.


    Problem:
    When I swap from a service on one satellite to a service on another satellite, there is a delay of 10sec to several minutes before the box starts to display any channels. In the meantime there is an on screen message (named "switch") saying: "Service could not be found".
    The problem is less frequent if I swap rapidly between services on different satellites. But the problem is back at the first service-swap after staying with the same service for a while or after a stand-by period.


    Debugging:
    * Another DM500-S from the same shipment shows the same problem.
    * My DM7020S works fine with the same setup.
    * I have also tried other Diseqc switches and LNB's - same problem.
    * Raising the LNB voltage and repeating Diseqc telegrams doesn’t fix the problem


    Does any of you have any explanation (Or a fix :D) for my problems?


    Thanks / Red_Eric

  • Serious problems with new DM500-S with BSBE1-706A Tuner

    Setup:
    New DM500-S with the following details:
    * Tuner: BSBE1-706A.
    * Board: Version 7.0 marked "06 11 DN500S".
    * Dream Hologram on bottom side.
    * New small silver remote.


    Connected to 4 LNB's (19.2E, 13E, 5E, 1W) trough a diseqc switch.


    Loaded Image: rel109-20060803.img.


    The box has scanned all satellites for free-to-air services.


    Problem:
    When I swap from a service on one satellite to a service on another satellite, there is a delay of 10sec to several minutes before the box starts to display any channels. In the meantime there is an on screen message (named "switch") saying: "Service could not be found".
    The problem is less frequent if I swap rapidly between services on different satellites. But the problem is back at the first service-swap after staying with the same service for a while or after a stand-by period.


    Debugging:
    * Another DM500-S from the same shipment shows the same problem.
    * My DM7020 works fine with the same setup.
    * I have also tried other Diseqc switches and LNB's - same problem.

    Does any of you have any explanation (Or a fix :D) for my problems?


    Thanks / Red_Eric