Was sind die Neuerungen dieser Firmware Release?
Firmware release 3.2.4für die DM7020HD
-
-
-
Vielen Dank
-
Ich habe hier ein Problem, wo ich einfach nicht herauskommen, wenn ich V OpenPli 2.1 alles installieren, gut geht. Wenn ich die neueste Version von Dmm installiere geht fein so gut gelingt. Aber wenn ich OpenPli 3.0 zu installieren, als auf 'Linux-2.6_2.6 3.2-dm7020hd .gz' auf dem Bildschirm auf der Vorderseite hängen wollen. Und wir sprechen hier über die DM7020HD ohne Hdd oder CF-Karte.Was ich auch tun dies oder nicht ich OpenPli 3.0 jetzt geht weiter der Verwendung oder einen Monat alt gestern macht keinen Unterschied.Das Boot ist #86
-
Hier gibt's keinen Support für 3rd Party Fremdimages, nur für original DMM Images, sorry
-
Hier gibt's keinen Support für 3rd Party Fremdimages, nur für original DMM Images, sorry
dreambox-image-dm7020hd-20121228.nfi Ist eine Dmm Image mit HbbTV wirkt auch nicht. keine start. -
dreambox-image-dm7020hd-20121228.nfi Ist eine Dmm Image mit HbbTV wirkt auch nicht. keine start.
-
Then you have to create a bootlog to see where it hangs ...
However, if flashing newest firmware from DMM from www.dreamboxupdate.com with dreamup or browser ... and it does not boot, I would guess it's a hardware failure. Normaly those images should work fine ...
-
I have tried different image I now give to what works and which are not. Works: release-dm7020hd-3.2.4/OpenPLi-2.1-beta-dm7020hd-20120924/newnigma2-release-dm7020hd-v3.3.2
Does not work: dreambox-image-20121228/OpenPLi-3.0-dm7020hd-beta-dm7020hd-20121230 No log No Network No telnet. -
I suggest you open a ticket, maybe the support has an idea
-
or create a serial bootlog before (via Mini USB Service Port) and attach it here ...
-
or create a serial bootlog before (via Mini USB Service Port) and attach it here ...
How i do it?
-
I have only a german info, but I think it should be understandable
-
just connect a pc to your dreambox usb-mini service port on the back, install the virtual usb com port driver (UART) and open a serial terminal like PUTY or HYPERTERMINAL and connect to COM1, 2, 4 or whatever your dreambox is connected to ...
When you are connected with your terminal program and turn on your dreambox, you should see a lot of debug information of the box and what it is doing right now ...
I dont think editing BIOS Settings is needed anymore, as far as I know it's already enabled by default on boxes with usb mini service ports ...