zombi
please share fixed AudioSelectionPlus/plugin.py

Zitat von formulerf3

I do not understand the difference .Net & Win32 API

Then you are the one who blow up the mind of expert(a programmer in our case)
most of sorting algorithms analise single character by character and don't care what character follows next

that is the reason why `12` comes before `2`

!solved!

have found an option,
it is:
config.plugins.pts.stopwhilerecording=false

have no idea when and why i have touched it trough GUI,
maybe i imagined, stop timeshift if the same service is in recording

Zitat von juanito_perez

No probs here

what type of tuner inside?
mine has Triple 2*S2X+T2/C (bolds are in use)

why timeshift doesn't work during other service is in recording?
in case timeshift works in parallel with PiP i'm guessing that isn't hardware limitation

isn't obvious?
when some particular parameter is stored as Auto
then tuner has to find right value each time of zap

look, my lamedb has stored particular value(on/off) (Pilot as example)
but when open `Manual Scan` section it is changed to Auto
and after do scan with that Auto parameter lamedb loses info which it had before

FEC - OK
Modulation - OK
Pilot - Auto

sorry, i'm oldish - can't agree `Auto` values -
exception is after `Tune Failed`, but not on first tune

Zitat von dhwz

writing the right values to lamedb

THANK YOU!
have to test that on dm900sstc, with my previous Dreamboxes `Auto` were wrote in lamedb

couple of transponder's parameters are shown Auto; Auto; Auto
if scan that way, stored services(lamedb) looses compatibility of export to any other Dreambox's model

p.s.
order of `FEC` and `S2 Modulation Type` must be swapped in parameters list,
because after you have set FEC and go step down to S2 Type and change it,
FEC is changed by self and you have to go up to set FEC again

and yes, why it were made as separate parameter instead extend Transponder type:
DVB-S; DVB-S2; DVB-S2 8psk; DVB-S2X

interesting,
why it's called same as clone's "Tripletuner" when it's "Dual Multisignal tuner"?

i just hope hardware will allow redirect signal from single DVB-T2/C input
to both tuners (same way as "Internal signal loop" on DVB-S2 Dual tuners)

Zitat von MartiniB

I changed Timezones one by one by step right in GUI and there is a result in console -
First is default GMT + 1 and next all GMT + 2
The read is one hour forward

two days before summertime(2017.03.24) also "(GMT+02:00) Jerusalem" started to show one hour +
then i did change to "(GMT+02:00) Harare, Pretoria" and got correct system time,
but all previously set timers started one hour earlier

following is current situation, one day before summertime

First is default GMT+1, then all GMT+2 and last one is GMT+3

Zitat

root@dm7080:~$
root@dm7080:~$ cat /etc/timezone; date
CET
Sat Mar 25 12:12:59 WAT 2017
root@dm7080:~$ cat /etc/timezone; date
CET
Sat Mar 25 14:13:08 +03 2017
root@dm7080:~$ cat /etc/timezone; date
CET
Sat Mar 25 14:13:17 +03 2017
root@dm7080:~$ cat /etc/timezone; date
CET
Sat Mar 25 13:13:32 CAT 2017
root@dm7080:~$ cat /etc/timezone; date
CET
Sat Mar 25 14:13:44 +03 2017
root@dm7080:~$ cat /etc/timezone; date
CET
Sat Mar 25 14:13:49 +03 2017
root@dm7080:~$ cat /etc/timezone; date
CET
Sat Mar 25 14:13:54 IDT 2017
root@dm7080:~$ cat /etc/timezone; date
CET
Sat Mar 25 14:14:04 AST 2017
root@dm7080:~$

Alles anzeigen

reds are wrong time for my area
orange = correct system time, wrong timer recordings

p.s.
board's auto corrector have made huge changed in text

Have reported about similar 'network none' problem on dm7080
Oe 2.5...

also opened Ticked where suggested send box to RMA,
but in case this is my main box i can't send it away -
still waiting for dm900 release with Twin Multituner DVB-S2/T2/C

Dreambox DM 900 Ultra HD 4K

That 'missing network' problem confirmed also with DMM image
Oe 2.5...

at btw started with last months oe2.2

Is there any way to write the last few bootlogs to internal hdd?
Move PC to Dreambox is so complicated,
but move dm7080 to PC will not able repeat No Network connection after >=6 hours in Deep Standby

to try read bootlog on mobile phone have already ordered Mini USB OTG, but this can come several weeks

Timezone problem:
don't think it is somehow connected to timeservers, they give GMT zero(UTC) time
also system time isn't synchronized to timeserver's time each second while i changed Timezone in GUI

this problem came with OE2.5, instead network problem came in last month's OE2.2 and migrated to OE2.5

no Network connection problem:
after 8 hours dm7080 in Deep Standby(two not enough to repeat)

ni_hao
THANKS for Your help!

Zitat von dhwz

@MartiniB
Wrong board

why answering if you don't like to help?

spent my time and installed dreambox-image-deb-dm7080-20161208.tar.xz, problem with Timezone is exactly same
for my (GMT+02:00) Riga system time is one hour forward also few other GMT+02:00 have the same case

i changed Timezones one by one by step right in GUI and there is result in console -
first is default GMT+1 and next all GMTs+2

Zitat

root@dm7080:~#
root@dm7080:~# cat /etc/timezone; date
CET
Fri Dec 9 22:00:27 CET 2016
root@dm7080:~# cat /etc/timezone; date
CET
Sat Dec 10 00:00:44 +03 2016
root@dm7080:~# cat /etc/timezone; date
CET
Sat Dec 10 00:00:58 +03 2016
root@dm7080:~# cat /etc/timezone; date
CET
Fri Dec 9 23:01:05 CAT 2016
root@dm7080:~# cat /etc/timezone; date
CET
Sat Dec 10 00:01:20 +03 2016
root@dm7080:~# cat /etc/timezone; date
CET
Sat Dec 10 00:01:27 +03 2016
root@dm7080:~# cat /etc/timezone; date
CET
Fri Dec 9 23:01:39 IST 2016
root@dm7080:~#
root@dm7080:~# grep Riga /etc/timezone.xml
<zone name="(GMT+02:00) Riga, Tallinn, Vilnius" zone="Europe/Istanbul" />
root@dm7080:~#

Alles anzeigen

few problems with dm7080 NN2 OE2.5 (Dream OS 4.3.0r22-2016-11-22),
yes someone will say that is wrong board, but i believe they haven't touched that parts

1.
Wrong time(+1h) for most GMT+2 Time zones, only Jerusalem gives correct time,
guess that can be connected to daylight saving.
Also would be nice this menu section Could show Time without several exit to able check result after change timezone.
and chose from the list would be more user friendly than present left-right

2.
After Deep Standby box starts without network connection, but after Power Off/On or Reboot all OK
problem started several weeks or month ago on OE2.2
[Blockierte Grafik: http://superfm.lv/m/Dreambox/20161205_1.png]

Settings:
[Blockierte Grafik: http://superfm.lv/m/Dreambox/20161114_2.png]

root@dm7080:~# 
root@dm7080:~# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:09:34:2F:13:F3  
          inet addr:10.0.10.191  Bcast:10.0.10.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:5524 errors:0 dropped:5 overruns:0 frame:0
          TX packets:1473 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:1185312 (1.1 MiB)  TX bytes:458675 (447.9 KiB)


lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:417 errors:0 dropped:0 overruns:0 frame:0
          TX packets:417 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:146227 (142.7 KiB)  TX bytes:146227 (142.7 KiB)


root@dm7080:~#

3.
how can i install multiple packages together on OE2.2 and higher?
previously i were able Cpoy-Paste several lines all together to telnet console, but now i have to paste each line separately

opkg update
opkg install enigma2-plugin-extensions-bitrateviewer
opkg install enigma2-plugin-extensions-menusort
opkg install enigma2-plugin-extensions-namezap
opkg install enigma2-plugin-extensions-pipzap
opkg install enigma2-plugin-extensions-pluginsort
opkg install enigma2-plugin-extensions-pluginhider
opkg install enigma2-plugin-extensions-permanentclock
#?? opkg install enigma2-plugin-extensions-scriptexcecute
opkg install enigma2-plugin-systemplugins-autoresolution
opkg install enigma2-plugin-newnigma2-language-lv
#?? opkg install enigma2-language-lv
opkg install cron
opkg install ntfs-3g
opkg install ntfsprogs
opkg install enigma2-plugin-systemplugins-satfinder
#?? opkg install sambaserver
opkg install enigma2-plugin-extensions-permanenttimeshift
opkg install enigma2-plugin-extensions-partnerbox

similar problem on OE2.2 based Newnigma2
after few hours in deep standby box's starting freeze on ~10% for five minutes and then starts without network
after reboot(or lot faster power switch off/on) ok

i know, i have to find time and try out OE2.5 based image

Twintuner with multi standard inputs is anyway big step forward, official + twin = more than enough
cloner's Tripletuner were single tuner with all inputs S2/C/T