did you delete all services of 1W before made new scan?
Beiträge von MartiniB
-
-
cover IR eye by some semi transparent plastic like sunglases
-
had something similar yesterday, and when finaly tuned signal indicator in InfoPanel jumping 0%, 100%, 24.00dB, 0%, 100%, .......
-
I heard that DiSEqC 1.1 Switch is backwards compatible to DiSEqC 1.0 and the simple settings would work but this is not true, at least for this switch.DiSEqC 1.1 Switches are different and some like SW101D has changeable modes,
with some modes it works with only 1.0/2.0 protocol commands with some modes only 1.1 commands,
by default SW101D programmed to work with bouthp.s.
still havent found solution how to change diseq mode by use dreambox
HELP! Is there any ability send manualy Diseq commands? -
dm8k has that problem in more crime form, only with RC of dm7020 its useable more or less
Zitat von MartiniBis this problem neverending story like diseq problem?
i think that is firmware problem not IR filter on frontpanel,
maybe Philips tv tryes to talk with device connected on HDMI, but dreambox doesnt understand and becomes crazy cause that
(like any dreambox model is litle freezie when LNB isnt connected)another strange thing is: dm8k works litlebit better with remote control of dm7020 than its native RC
but that isnt first problem which is ignored by DMM
-
Homey
please translate also this(english posts there are ignored)- 1.
show sat position(**E or **W) of selected channel when browsing channels list
have fix by self - Python_patcher.ph - 2. add soundtrack priority (like in E1)
s:/extras/audiochannelspriority=Russian#russian#rus#rus.#English#englisch#engl#Original#orj#ORY#ory#orig#org#dos#Tonoption 2# - 3.a show count of services in brackets after folders [services]; [providers]; [new found]
3.b add new folder order type by [transponders] (same way as [services]; [providers]; [new found]);
3.c add exit/up line at begining of list (like in E1)
3.d change function {delete selected sattelite} to {delete} selected service or dirrectory
3.e when you open some bouquet where current channel presented then move focus on it (like in E1)
3.f when browsing channel list show names of bouquets which already have that service added
3.g move folder [Current Transponder] to the top or bottom off Sattelittes list instaed somewhere at the midle - 4. remember transponders which cant be received in sattellites_ignore.xml or sattellites_failed.xml
and skip them on next scan
btw. cant understand why after online update always is lost my edited sattelites.xml(without Astra 2D and 36E without African frequencies) - 5. time synchronisation from list of manualy selectet transponders(user trusted)
or from i-net time.server.com - 6.a. EPG maping from another channel. in case some chanel has longer program table, but other has better picture or prefered for openig
6.b. export/import EPG for particular channels.
i would export epg for some channels of cable operator which sends in DVB-T to users with DVB-S where EPG isnt present
(please with E1<->E2 compatibility) - 7. (only on 8k posible) chose audiotrack from another channel
example: for waching F1 in HD but audiotrack choose native from another service
maybe some changeable delay option must be present there - 8. FAST BOOT/REBOOT option. when box is configured and nomore new hardware planed then
can be markt one checkbox in Shutdown menu and then dreambox dont spent time on checking all posible hardware, but boot from prepaired list with previous present harware - 9.
"native" video resolution for option [Display 4:3 content as:] instead 4:3+blackbars
fixed by Ghost - [SOLVED 99%] DVI(HDMI) can't handle most used aspectratio
- 1.
-
i wrote "second biger stupid"
-
no
Big RC of dm7000;7020;7025;600;800 can be used for that models plus dm500 and dm8000
frirs small black/second biger stupid RC of dm500 can be used only for dm500
last small silver RC of dm500 can be used only for dm500 in case image in box is enough fresh
Big+extra keys row RC of dm8000 works only with dm8k, but it is so buggy in case Tv is ON (8k works much better with RC of 7020)
sorry, dont know anything about 500+ and 100 models
-
by this instruction(sorry found only russian)
just open to see pictures
http://www.superfm.lv/m/LNBs/SW101D_ReadMe_ru.docwith plugin SS2DiSEqC and SkyStar2 PCI card mode is change able just by send commands in right order
-
will try without "Automatic Backlight", but my research shows problem is something other
from BetaTest board:
[Moderator] and it should stay there! [/Moderator] -
+1 for that feature
it will be wery useful in case dreambox+philips_lcd cause
a) dreambox remote control becomes crazy when philips connected HDMI-DVI
b) for digital sources not abled beautiful function AutoZoom on Philipsso sad when top sat receivers arent compatible with top lcd tvs
-
my apologise, you are rigt dint read slowly
but in case you spent time on answer you could answer om my '?????' -
Enigma1: /tmp/pmt.tmp
Enigma2: ????? -
in case you planed 8k dream you have to chose twin output LNBs to able useage of second tuner
troug diseq switch you can connect LNBs how many you want(i stoped on 25)
on each dish better instal more than one LNB
-
@Gino29
looks like tread has changet its number,
easyest way is open my profile and press [sushen], then you will see all my posts
i think it was DM800 Problems from hellazeemmir
i use passive diseq switch SW101D
http://www.satellite-heaven.de/testreports/sw101d.htm
by default it is programmed to mode 4 and works with all protocols *.0 and *.1,
but when it programmed to mode 5 it works only with pritocol 1.1
in that case you can instal other protocols diseq swiches before it or aftermy instalation:
dreambox <-> switch1x4(Protocol 1.0) <-> 3x switch1x10(protocol 1.1)
in that way i have 25xLNB connected
for Enigma1 must be set "Swap Commands"
for Enigma2 must be set "Command order=committed,uncommitted,toneburst"old pictures of my roof, before last two dishes added:
[Blockierte Grafik: http://www.superfm.lv/m/LNBs/sat_mrt_home_081021_2short.jpg][Blockierte Grafik: http://www.superfm.lv/m/LNBs/sat_mrt_home_081021_1short.jpg]
-
Code
Alles anzeigen<terrestrial name="Riga/Baltcom_MMDS(lv)" flags="5"> <transponder centre_frequency="330250000" bandwidth="0" constellation="2" code_rate_hp="2" code_rate_lp="0" guard_interval="1" transmission_mode="1" hierarchy_information="0" inversion="0" /> <transponder centre_frequency="354250000" bandwidth="0" constellation="2" code_rate_hp="2" code_rate_lp="0" guard_interval="1" transmission_mode="1" hierarchy_information="0" inversion="0" /> <transponder centre_frequency="370250000" bandwidth="0" constellation="2" code_rate_hp="2" code_rate_lp="0" guard_interval="1" transmission_mode="1" hierarchy_information="0" inversion="0" /> <transponder centre_frequency="378250000" bandwidth="0" constellation="2" code_rate_hp="2" code_rate_lp="0" guard_interval="1" transmission_mode="1" hierarchy_information="0" inversion="0" /> <transponder centre_frequency="386250000" bandwidth="0" constellation="2" code_rate_hp="2" code_rate_lp="0" guard_interval="1" transmission_mode="1" hierarchy_information="0" inversion="0" /> <transponder centre_frequency="394250000" bandwidth="0" constellation="2" code_rate_hp="2" code_rate_lp="0" guard_interval="1" transmission_mode="1" hierarchy_information="0" inversion="0" /> <transponder centre_frequency="402250000" bandwidth="0" constellation="2" code_rate_hp="2" code_rate_lp="0" guard_interval="1" transmission_mode="1" hierarchy_information="0" inversion="0" /> <transponder centre_frequency="410250000" bandwidth="0" constellation="2" code_rate_hp="2" code_rate_lp="0" guard_interval="1" transmission_mode="1" hierarchy_information="0" inversion="0" /> <transponder centre_frequency="418250000" bandwidth="0" constellation="2" code_rate_hp="2" code_rate_lp="0" guard_interval="1" transmission_mode="1" hierarchy_information="0" inversion="0" /> <transponder centre_frequency="426250000" bandwidth="0" constellation="2" code_rate_hp="2" code_rate_lp="0" guard_interval="1" transmission_mode="1" hierarchy_information="0" inversion="0" /> <transponder centre_frequency="434250000" bandwidth="0" constellation="2" code_rate_hp="2" code_rate_lp="0" guard_interval="1" transmission_mode="1" hierarchy_information="0" inversion="0" /> <transponder centre_frequency="442250000" bandwidth="0" constellation="2" code_rate_hp="2" code_rate_lp="0" guard_interval="1" transmission_mode="1" hierarchy_information="0" inversion="0" /> <transponder centre_frequency="450250000" bandwidth="0" constellation="2" code_rate_hp="2" code_rate_lp="0" guard_interval="1" transmission_mode="1" hierarchy_information="0" inversion="0" /> <transponder centre_frequency="458250000" bandwidth="0" constellation="2" code_rate_hp="2" code_rate_lp="0" guard_interval="1" transmission_mode="1" hierarchy_information="0" inversion="0" /> <transponder centre_frequency="466250000" bandwidth="0" constellation="2" code_rate_hp="2" code_rate_lp="0" guard_interval="1" transmission_mode="1" hierarchy_information="0" inversion="0" /> <transponder centre_frequency="474250000" bandwidth="0" constellation="2" code_rate_hp="2" code_rate_lp="0" guard_interval="1" transmission_mode="1" hierarchy_information="0" inversion="0" /> </terrestrial>
and that names can be reserved for future use
"Riga/Baltcom_Optika(lv)" - same cable operator but sends DVB-T signal in different band for some areas
"Riga/IZZI(lv)" - another cable operator which use DVB-T modulation on cable
"Riga/Air(lv)" - neverendig testing on DM43(650 MHz); DM45 (666 MHz); DM48(690 MHz); DM59(778 MHz);
DM66(834 MHz)p.s.
werent easy edit terrestrial.xml without explanations in it, maybe someone can add them by default at begining of file(for satellites.xml too):
this is my, but there can be some mistakesXML
Alles anzeigen<?xml version="1.0" encoding="iso-8859-1"?> <!-- useable flags are 1 -> Network Scan 2 -> use BAT 4 -> use ONIT 8 -> skip NITs of known networks and combinations of this.--> <!-- bandwitdh: 0 -> 8 Mhz 1 -> 7 Mhz 2 -> 6 Mhz other -> Auto --> <!-- constellation: 0 -> QPSK 1 -> 16-QAM 2 -> 64-QAM other -> Auto --> <!-- E1 ratelp: E2 code_rate_lp: 0 -> 1/2 1 -> 2/3 2 -> 3/4 3 -> 5/6 4 -> 7/8 other -> Auto --> <!-- E1 ratehp: E2 code_rate_hp: 0 -> 1/2 1 -> 2/3 2 -> 3/4 3 -> 5/6 4 -> 7/8 other -> Auto --> <!-- guard_interval: 0 -> 1/32 1 -> 1/16 2 -> 1/8 3 -> 1/4 other -> Auto --> <!-- E1 transmission: E2 transmission_mode: 0 -> 2k 1 -> 8k other -> Auto --> <!-- E1 Hierachy: E2 hierarchy_information: 0 -> None 1 -> 1 2 -> 2 3 -> 4 other -> Auto --> <!-- inversion: 0 -> No 1 -> Yes other -> Auto -->
-
Homey
god news,
but with newer E2 images than 081025 [Moderator] No Support for that kind of stuff! [/Moderator]makes crash of Enigma2 -
2pat
only this way works form me:ZitatOriginal von MartiniB
i have fixed by other way problem "1. Changing channels ......."cannot tune error"...."
i have add diseq switch 4x1 between dm800 and switch 10x1
dm800<----Switch4x1(protocol 1.0)<----Switch10x1(protocol 1.1)<----10xLNBs
but when i moved 4x1 from receiver to the roof my old box dm7020 cant get signal after boot(have to make one zap)Ghost
please read my research why and when that shit happens:
Enigma 2 Kanalliste verstehen
HD channels on Thor 0.8'w
dvb-s2 tuner problem ?
dm800 Sat Scan/Auto services update Bug ("SID not found in PAT")and in that case i would like see ability for delete services from OSD (single channel as in Enigma1 and aditional 'All new Found')
also will be helpful new feature which able sort chanels by transponders (like by prividers) -
i want reprogramm(change mode) of Diseq Switch 10x1 DW101D
by it instruction http://www.satellite-heaven.de…eutsch-10in1%20DiseqC.pdf
it cant be reprogrammed by send commands in rigt order - mode5:
{E0 F0 48 55 80 7F} {E2 F0 49 55 FA 05}but in case i havent theyr programmer and neder SkyStar2 PCI card i would like sent that commands from dreambox
-
no, it is tuner problem(maibe spaun is less sensitiv)
i conected two dreams(tuned to same transponder) to one LNB
dream1<----dream2<----LNB
time at time bouth had signal loss, but when one is in standby then signal were oki have fixed by other way problem "1. Changing channels ......."cannot tune error"...."
i have add diseq switch 4x1 between dm800 and switch 10x1
dm800<----Switch4x1(protocol 1.0)<----Switch10x1(protocol 1.1)<----10xLNBs