Hi
Please make test with scan transponder on 13E
10930 H 30000 2/3 8PSK
DM 900 and 920 with tuner Si2169D and Si2166D can't find channel "Shant Music HD"
regards
Hi
Please make test with scan transponder on 13E
10930 H 30000 2/3 8PSK
DM 900 and 920 with tuner Si2169D and Si2166D can't find channel "Shant Music HD"
regards
Nothing wrong here, all channels available. Only problem is that the Provider is using an invalid Servicetype 0 (both Shant channels) thats why you can't see them in TV servicelist.
Use dreamboxEDIT to add it to your bouquet.
Hi
Latest updates make problems with scanning
In 920 I use Si2169D and Si2166B
Example
11410 H 45000 8PSK 5/6 LOCK OK but no scan
11350 H 45000 8PSK 5/6 LOCK OK but no scan
With Si2166B channels scan OK
Why
Are you sure, that the problem exists since "last update"? Did this works ever?
The combination of 920 with 2169D tuner has never worked here on the 3 pantelio transponders at 51.5°e (since i got the box dec´17)
signal is good, blindscan ok also, but channelscan says no channels (at every time since dec´17, never listed channels at servicescan)
900 with 2169C = no problem
No it never worked on 920.
Hi
In old images tuner Si2169D scan Pantelio transponder without any problems.
In last week I update image from 20.03.2018 and problem exist.
Pantelio channels doesnt work with CI but Si2169D always scan these channels.
Regards
i can not really believe what you are writing. like i wrote, i´ve got my 920 in early december 2017 and i tested so to say all images that have appeared.
never it was possible to get a clear channel scan of the programms from these transponders.
please tell me the firmware version of your "old" image, so that I can convince myself of it. thanks.
@dhwz genau das ist auch mittlerweile mein Standpunkt. Ist ja nicht das erste Mal, dass wir darüber sprechen. Umso verblüffter bin ich jetzt, dass @zuchnet in den Raum stellt, dass es mit einem früheren Software Stand bei ihm funktioniert hat. Und diesen Stand hätte ich gerne selbst mal ausprobiert
Nachdem es mir irgendwie keine Ruhe gelassen hat, noch ein letzter, kurzer Test, der die vorige Aussage von mir komplett auf den Kopf stellt...
Der Tuner sitzt in Steckplatz B in der 920er und ist der bereits erwähnte 2169D Tuner
Tuner Konfiguration B1: (ganz normal, manuelles Diseqc 1.2, kein USUALS)
Zum Testen Tuner Konfiguration B2: (intern verbunden mit B1)
Einstellungen für Kanalsuchlauf mit Tuner B2:
Laufende Kanalsuche mit Tuner B2:
Resultat der Suche... Kanäle in der Kanalliste unter 51.5°E:
Die Frage, die jetzt schon erlaubt sein darf, warum funktioniert die Kanalsuche bei Verwendung von Tuner 2, wenn das Signal intern durchgeschliffen wird?
Bzw. funktioniert sie bei Tuner 1 nicht und es kommt "0 Kanäle gefunden?"
Ich werde jetzt mal die Setting Datei umschreiben, dass quasi B1 mit B2 getauscht wird. Die Drehanlage nicht auf B1 konfiguiert ist, sondern auf B2.
Selbstverständlich dann auch dort das Kabel vom Rotor angeschlossen... Auf B1 konfigurier ich mal das DVB-T2 Signal...
Nach dem gerade durchgeführten Kurztest, sehe ich dabei durchaus Chancen, dass es dann funktionieren könnte...
HEUREKA!
Es funzt!!!
(Auf 920 mit 2169D, an Tunereingang 2. Bei mir in dem Fall B2)
HEUREKA!
Es funzt!!!
(Auf 920 mit 2169D, an Tunereingang 2. Bei mir in dem Fall B2)
If possible allow me to issue the skin you have on the picture
It is different from the cino skin on the sites
Sorry to request and leave the subject text
That doesn't matter which slot is used, he talked about the tuners itself A2 instead of A1 or B2 instead of B1.
Well forget it, I already wrote about fact that there were no problems with scanning, but it started
There was no earlier as it never worked before on that box.