No. This does not make a second line unnecessary in case you want watch and stream/record multiple channels
Then what would I do if the LNB only has 1 output port?
No. This does not make a second line unnecessary in case you want watch and stream/record multiple channels
Then what would I do if the LNB only has 1 output port?
You should replace the LNB with a LNB that has at least two output ports. Then connect a multiswitch to the two lines coming from the LNB. Your TV(s) will be connected to the multiswitch then.
Another option is using a unicable LNB connected to a unicable capable multiswitch. This would allow watching/recording/streaming (max. 4 different channels) with only one tuner. But: I have no idea if unicable LNBs and -multiswitches are available in Australia. And before ordering stuff you should wait for somebody experienced in unicable configurations responding to this thread.
Moin!
I just had a look at
http://www.lyngsat.com/packages/foxtel.html
They are all on High Band and with the exception of 5 Transponder all horizontal (HD is all on horizontal).
So if these Boxes have a dual-tuner inside with an internal loop through it could work with one line.
But no way with a simple single tuner.
I think alps lnb are better!
http://www.ebay.com.au/itm/Bul…ash=item4d1ba9a89d&_uhb=1
but other lnb works too!
I think alps lnb are better!
http://www.ebay.com.au/itm/Bul…ash=item4d1ba9a89d&_uhb=1
but other lnb works too!
What's the difference?
Sorry I just want to confirm this.
For example, if I had 4 Dreamboxes in the house, all watching different channels, would the 2 lines from the LNB be enough? Or would i require 4 lines to the multiswitch?
Thanks
4 lines are better or you can change to unicable, this works with 1 cable to lnb! You need a splitter too!
I understand 4 may be better, but will my given scenario work with 2 lines? I dont have a lot of money so unicable is out of the question
How many boxes or tv will use you?
by sat, you must have 1cable for receiver direkt from lnb or multiswitch!
by unicable you can use 1 cable from dish to splitter!
.
How many boxes or tv will use you?
by sat, you must have 1cable for receiver direkt from lnb or multiswitch!
by unicable you can use 1 cable from dish to splitter!
Eventually I plan to have 3 boxes, and 1 of them will have 2 tuners. If you can link me to some affordable unicable then please do that (shippable to Australia)
BUMP, please help! thanks
You must have 4 cable or unicable with splitter, but i cant find dealer in australia!
Dur Line 102 unicable lnb and technisat Splitter is the best for you!
Shipping from Germany with Lnb and Splitter ca 100euro...
Do I require a multiswitch if I have 1 dreambox? Or can have the line go directly into the Dreambox?
Thanks
Moin!
In case of a single tuner Dreambox the Lnb can be connected direktly to the STB.
.
Alright thanks!
Does this do anything useful? http://www.ebay.com.au/itm/SAT…ash=item2ebdf7e16f&_uhb=1
thanks