schon mal gelesen, was ich oben geschrieben hab? das ist gar nicht unkontrolliert.
Beiträge von dre
-
-
im bouquet verhalten sich die tasten gleich wie wenn alle sender angezeigt werden: es wird zum entsprechenden buchstaben gesprungen.
-
ist ja auch keine dreambox...
-
und wenn dein basis-image das dmm-image ist, dann wird nur /usr/share/enigma2 als pfad zugelassen. das heisst, in deinem fall werden die picons in /usr/share/enigma2/media/hdd/piconoled gesucht.
bei der 7080 hast du genug platz im flash, dass du die picons dorthin kopieren kannst.
-
Steht sogar auf dreamboxupdate.com. Aber jetzt nicht mehr oben sondern unten.
-
cmd is a variable. And it's declared exactly there where I assign the value. Execute expects a string not a function. Maybe it works with a function when you at least have a return value that is a string. For me this code works. The progressbar is working and the text. If you have more than one command to execute you should first build all the commands and store them in a list. Then you execute command after command.
-
-
@gutemine: could it be that the problem for some 28.2 channels is caused by the fact that dmm uses 28.5 for astra2? This leads to a different servicerefence and quite likely en empty service name.
-
I see you use several print. Do you see them in the console? What's the CPU load during the conversion?
-
The question is: what does your eConsoleAppContainer do? And what does the progress represent? Are you executing several commands? Or do you download something? And you want to see that progress?
-
Could it be that the value for the slider is in percent? This would mean that you have to divide it by 100.
-
ServiceScan.py has something similar. Just without eConsoleAppContainer. But that should work as well. I think I already did something like this.
-
Sehe ich auch so. Es müsste wohl wirklich eine Option geben, das befüllen des epg durch e2 temporär zu disablen.
-
@gutemine: ich würde sagen, dass der wert aus der config (config.misc.epgcache_timespan) übernommen wird. das kann unter 'Anpassen...' eingestellt werden.
-
Schon mal alles mit dreamboxedit auf den pc geladen und dort bearbeitet? Vielleicht hilft das
-
msatter: müsste denn was gespeichertt werden? Wenn externe daten in der db sind, werden die daten des senders nicht mehr verwendet.
-
wie schön, dass auch dieser thread wieder zweckentfremdet wird.
-
Es ist sicher etwas, was nur bei dir auftritt. Daher tönt hardware plausibel. Welcher wizard kommt nach der bildwiederholfrequenz?
-
This issue was reported in the German part of the board too. But the information you've extracted from the journalctl seems new to me. Could be a lead. I will check with my dreambox as well.
-
Könnte bei autotimer einen sideeffect haben, wenn man die sender nicht eingrenzt.