one question about quality the tuner can change the picture quality? or only impact on strength of the signal

i got it works all.

With this config (cable connected tuner A1)
tuner A1 advanced diseq 1.2 (less sat 27,5W)
tuner A2 nothing connected
Tuner C motor simple

all sats work and when i choose 27,5W tuner C is select but not signal.

Yes that im doing i thinkk that can be done without buy another multi lnb. I want to use tuner A1 mode advance diseq 1.2 for all sats less 27.5W where i want to use the other tuner C now i got all works fine when im in sat 27.5W tuner C is choosen but not signal (Tuner C the same as A1)

its possible to configure to choose one tuner in diseq and for only one sat use other tuner?

thats why i reuqest oin the officiel board to modify the modules for next updates

time ago from south of spain signal level is 0 for bbc on 28,2 on 27,2 its ok, if i can get the old drivers and replace on new image maybe it works

i only want that bbc 27,2W works as good as on my last vu duo2 after spent 700€ on dm7080 and lost capacity

where i could find old dvb modules? from 02/2015? for dm7080

i have my dm8000 with a dtt tuner and i want to send a channel to my dm7080 by net its possible? i add the channel on list but i have trobles with audio its cutting every time

if likes more in this way............................

the thing is why was changed the dvbsnoop that now doesnt works??

Zitat von gutemine

90% of your post ist about stuff which is against the board rules ...

Zitat von gutemine

Zitat von gutemine

i didnt spoke about unscramble only to get the PMT

yes i have done all and try all as other collegue told me the proiblem is something that has change on dvbsnopp function. because on image form 2015 works.

i have the four files one probelm on dm7080 run the script that has to be manually. othe issue
:
hese are the steps

SCRIPT

long replace with word short and full restart from Menu.

second - for Vu you had edited lamedb part for 27.5W, in short mode not needed, now you must do

manual scan
this 27.5W freq. scan and
with delete before - YES

now you have normal scanned channels in lamedb and vu+ redone 27.5W part is gone.
third - this:

... short -d /dev/dvb/adapter0/demux0"

demux0 is for all Vu, Xrend, Mutant and partly for Dreambox.

some dreamboxes maybe need demux3, you can see this usually from oscam webinterface log, is demux0 in use or demux3 maybe.
And when needed and demux* is replaced correctly, again full restart to activate edited bbc script.

The problem is the new DVB Modules.DM7080 goes long and short mode.
It is easier to use OE 2.0 image {ATV, HDF} ... there it goes as the VU +, OE2.2 are other problems from the start script must be used telnet.

i have a tuner bcm4505 i can lock but always appear the message that the chaannel is invalid. About decryot i dont need help. The probñem is that the dvbsnoop is nto working like before for example on image 08/02/2015

thanks

there is any way to get the video and audio on this trasponder on dm7080

there is any idea to get working on last release of official image for dm7080 im speaking about to get the pmt audio and video

Other question, i could connect the cable of my sat motorished dish to tuner A on my dm7080 configure internally Loop with tuner B and connect a cable " bridge" between tuner B and the new bcm4505? Then should works all the three tuners? Im right?

then i have dm7080 for long time i hope.

289€ will be the price? then cheaper than 7080? i have not tv 4k is useful to change dm7080 to 900 4K?

Zitat von m0rphU

Is AC3 Downmix enabled?

yes

Zitat von Reichi

antrabe3: Vendor Specific Handling -> On.
Do you hav any AVR in between?

Jogi: ich seh jetzt nix was von dreambox-seiten falsch laufen würde

i use the output of audio headphones on the tv is the only way for my rca amplifier but not works im modifying serveral option on hdmi cec but i cant get works audio maybe is an option of the tvmenu