Well guess you are closer than me to the signal, i can't reach 1 mbs in n mode
Thanks
I've tested the transfer speed.
Got 1.1-1.3 Mb/s on upload/download with G , when i use mixed mode G/N without making any changes to the config other than g/N mixed.
then i reached 2.2 - 2.5 Mbs at peek.
/Gmack
Thanks for informations
Anyway now it's working with drivers posted by enigma
But performance is quite poor (i have only 800 kb/s) so i will come back to my previous wireless client that with its external antenna reach 1.5 Mb/s
Hoped that wireless n could increase transfer rate
Can you tell me which transfer rate you reach when saving a file?
Thanks
sorry not at home at the moment... (will get back with more detail later)
No, i'm using a linksys wusb600n.
ps here are my iwconfig
Update: after installing drivers manually (copyng them into the folders) and rebooting dwa-140 works with drivers posted by enigma
Mine is exactly the same
But drivers poste by Enigma seem not to work
iwconfig says
eth0 no wireless extensions.
lo no wireless extensions.
Mine is exactly the same
But drivers poste by Enigma seem not to work
iwconfig says
eth0 no wireless extensions.
lo no wireless extensions.
If you use this command "cat /proc/bus/usb/devices"
What does it say (the part about usb wifi...)
it should look like this
Here's my cat /proc/bus/usb/devicesoutput
But when i try iwconfigthe card is not seen
T: Bus = 01 Lev = 01 Prnt = 01 Port = 01 Cnt = 02 Dev # = 4 Spd = 480 MxCh = 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1P: Vendor=07d1 ProdID=3c09 Rev= 1.01S: Manufacturer=Ralink S: Manufacturer = Ralink
S: Product=802.11 n WLANS: SerialNumber=1.0 S: serialNumber = 1.0
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=450mAI: If#= 0 Alt= 0 #EPs= 7 Cls=ff(vend.) Sub=ff Prot=ff Driver=rt2870 I: If # = 0 Alt = 0 # EPs = 7 Cls = ff (vend.) Sub = ff Prot = ff Driver = rt2870
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0msE: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0msE: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0msE: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0msE: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0msE: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0msE: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Sorry to here that, i got it to work but this driver i not for linksys wusb600n. i followed this http://translate.google.com/tr…ess-d-link-dwa-140-a.html
but needed another driver.
Can you please post the working driver?
can not not get it from you address
That's a great news
Can you tell me which transfer rate you get with dwa-140?
I have a dlink dwa-140
After trying for 1 week i gave up
can't tell what i"cat /proc/bus/usb/devices" says. Just installed a new image and dind't even try to use these drivers
without a crashlog provided noone will ever be able of helping you...
Here you are the crash log
The guy that posted drivers told that could not use GUI
But without wlan plugin GUI i don't know how to activate Wlan configuration.
Anyway i think support for N wireless would be greatly appreciated.
i'm currentlly using a G wireless client ant transfer rate is 1.5 Mbytes/sec
You can imagine how much it takes to move an HD movie from DM800 to my laptop
Thanks
I have found drivers
But when i try to activate wlan configuration enigma2 crashes
Can you help us?
See 800 wireless n
Alles anzeigenfor most of the HD Content I have seen for now 802.11g would do a nice job..
Well, in general madwifi drivers should work afaik.
But they are not explicitly supported (at least not yet).
Basically you should:
1. Look if there is any Linux Driver for the Chip u want to use
2. Look if anyone has already compiled the driver for the dm800
3.
3.1 Yes -> use it
3.2 No
3.2.1 -> do it yourself
3.2.2 -> wait for someone to do it (for you)
I changed manually RT2870STA.dat
But i guess in some way i have to tell to dream to use wlan instead of ethernet connection
If i don't configure anything but the dat file, wlan in not checked in wlan plugin and seems not active
I'm afraid you simply can't, as far as "enigma®" said that you can't configure it by GUI.
Set SSID manually changing it into RT2870STA.dat and leave DHCP on
I'm quite near
Installed and configured everything and now wlan is seen
One question: do i have to set wlan plugin options?
When i try to do that, setting my SSID and a static IP, and apply the configuration, enigma crashes and loose all my settings
That's what i get in crashlog
WLAN-MODULE None
setting for adapter ra0 attribute configStrings to value None
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 179, in processDelay
callback(*retval)
File "/usr/lib/enigma2/python/Screens/NetworkSetup.py", line 608, in applyConfig
self.ws.writeConfig()
AttributeError: 'AdapterSetup' object has no attribute 'ws'
Any idea?
Alles anzeigenTake it here Tested long time ago and working. One problem - you cant configure wireless by GUI...Need edit RT2870STA.dat.
Unpack ZIP
Install rt2870sta.tar.gz
Create directory /etc/Wireless/RT2870STA
Copy RT2870STA.dat to /etc/Wireless/RT2870STA and configure it (learn README_STA)
modprobe rt2870sta
Be happy;)
Many thanks but... i need some more help
I have[Moderator] Image is in violation of the Boardrules [/Moderator] and from install menu can only choose ipk and nab packages
how do i install a tar.gz?
can i install it manually from telnet?
Alles anzeigenTake it here[/url] Tested long time ago and working. One problem - you cant configure wireless by GUI...Need edit RT2870STA.dat.
Unpack ZIP
Install rt2870sta.tar.gz
Create directory /etc/Wireless/RT2870STA
Copy RT2870STA.dat to /etc/Wireless/RT2870STA and configure it (learn README_STA)
modprobe rt2870sta
Be happy;)
I know actually wireless n is not supported
But it would be great especially on HD models (i have a DM800 with a ralink rt2870) since transferring a movie (and especially a HD one) to pc will take a large amount of time
Any plan to support it in future?
I know that ralink has linux drivers that should work quite well
Or anybody here in the forum can compile ralink rt2870 drivers ?
Thanks
I know actually wireless n is not supported
But it would be great especially on HD models (i have a DM800 with a ralink rt2870) since transferring a movie (and especially a HD one) to pc will take a large amount of time
Any plan to support it in future?
I know that ralink has linux drivers that should work quite well
