I bought the box on last September. I try to setup the box on first week without success and leave the dreambox in the corner. I have some problems and know I pick up the dreambox.
I'll try to contact the shop. Thanks for help

But since there is a issue in the i2C. can you indicates the resistors pulls-up used in the i2c lines . I'll check with oscilloscope the waveforms.

here is the bootlog file. (attached file)

I bought my dreamcast as genuine.

any idea to fix the issue?

I run a "genuine dreambox" plugin and I get a code.
how I check this code?

thanks

Zitat von mimisiku

Yes, got those too.. All NAND chips have some 'bad blocks'. The system isolates those and therefore don't bother operation. Only when the 'boot' area is affected, the box must be repaired

in this case, can you confirm the affect bad sectors are located in 'boot' area?

Hi, another point.
I look to the log in the service port when I power-up the box.
I saw some bad sectors in the nan flash memory. see the attached image.

can you check if in your box there is also this error bad sector?

thanks

:(, anyone have another suggestion?

Zitat von mimisiku

When you started the box for the first time, did you enter into the startup-wizard? If not: the box was not new and should be returned immediately!

You can enter recovery mode by turning off the box completely. Switch it on and as soon as the LED blinks, place your finger on the LED foil. Release your finger when the LED lights continuous red.

Or go to the shut down menu and choose 'Recovery Mode'..

yes, It started in startup-wizard.
I already start in Recovery mode

-> enter in telnet and write theses cmds:
echo rescue > /proc/stb/fp/boot_mode

shutdown -r now

I did firmware upload for last firmware on http://dreamboxupdate.com/

but still DVB-S2 instead DVB-C !!

Zitat von mimisiku

That's extremely weird... The official firmware should list the correct tuner.... Did the box start with the startup-wizard? Or was it a 'famous' Am*****n buy?

I would suggest a recovery-flash and then a recent image... It should offer the correct tuner...

Hi, The box started with startup-wizard.
I buy my box in portugal store.

can you help me on recovery-flash?
What i have to do? step by step.

Thanks a lot.

I buy a new dreambox 520 DVB-C/T2 box.
my first step was update the firmware for the latest one. I pick up the firmware on http://dreamboxupdate.com/
Now, the detected tuner on my box is :
Tuner A: BCM73625 (G3) (DVB-S2)
but my dm520 has DVB-C tuner.
I want my dm520 working on DVB-C, can you help me?