Beiträge von PiGeon
-
-
I know the cause is the Samsung TV, but we all know they will not fix it.
And I am not going to throw the TV in garbage if it still works perfectly, I don't want to create unnecessary waste.
So, I still hope there is some workaround possible with the HDMI vendor/experimental option/feature.
thanks for understanding
PiGeon
-
I know some vendors' implementation of CEC is horrible, additionally, the TV is quite old, so one can't really hope Samsung will fix it and that's exactly the reason I am asking here
Because here come the people who might have had a similar setup and found a solution already and the other reason is that Reichi could adjust the CEC plugin to make a workaround possible, either via the vendor specific or the experimental extension or implement the suggested blocklist.
The old AVR had a learning RC, so I could use its remote to start the TV as well and so could have just two RCs on the table, it was the same with DMs RC10. But the new AVR RC is not able to control the TV via infrared, it looks like they have bet everything on CEC.
It has been years since I tried to solve the "too many RCs on the table" situation with CEC, I really hoped the new AVR could change the game.
Yesterday I found out one can learn the RCU-BT to control other devices via the irdb.json, so there is a chance I could have just 2 RCs on the table again, but today I learned that I must find someone with Dreambox one or two to do the update
thanks for helping
PiGeon
-
Hi there,
I have finally replaced my AV receiver with one having HDMI inputs. I have connected my DM920 with the receiver and hooked the TV on it too.
Yesterday I was quite happy it works how I always wanted it, when I power the Dreambox the TV and AVR are powered on too, the same goes for shut down. Having the volume control redirected to AVR, I don't need any other RC most of the time.
But during the night Dreambox powered on and started the AVR too (luckily the AVR power on volume limit was set quite low, so nobody was woken). The TV stayed off.
I have been able to reproduce it in the morning. I am not sure I am reading the log properly, but it looks like the TV is starting to communicate after being in stanby for 45 minutes and wakes the Dreambox, which wakes the AVR. I was able to prevent Dreambox from being woken byt disabling the option "Power on/off based on CEC Events", but this also prevented to wake Dreambox up while switching the AVR input from Radio to Dreambox. Is there any way to blocklist the TV to ignore its power on requests while allowing it from the AVR?
If not, how difficult would it be to extend the "Power on/off based on CEC Events" options by two blocklists, one for Power-on and other for Power-off)?
And as it looks, I have one additional issue with the TV doing something after 45 minutes, what puts it in a state which makes it immune to the CEC Power on calls, the only way to power it on is via the Samsung RC. In the attachments you can see the logs from each of the 3 phases. First when I put the Dreambox to Standby, second where you can see the communication from TV and third, where I Powered on the Dreambox, where it didn't wake up TV.
Please can somebody look at the logs, see if I interpret the logs properly and if there is some extra command or sequence of commands to wake the TV from the strange state.
Thanks, and have a peaceful and relaxing festive season!
PiGeon
-
I have changed the B1 config to advanced and it helped, now it prevents to zap to channel from different satellite.
I would however expect this to work the same way in simple mode, but never mind I am lucky that it works
thanks!
PiGeon
Tuner B1: Si2169C (DVB-S2 / DVB-C / DVB-T2)
Tuner type DVB-S2
Configuration mode simple >> advanced
Satellite All Satellites 1
LNB 33
Priority Auto
Type Universal LNB
Voltage mode Polarization
Tone mode Band
Increased voltage No
Toneburst None
Committed DiSEqC cmd None
Fast DiSEqC NO
Sequence repeat NO
Command order committed, toneburst
Uncommitted DiSEqC cmd None
DiSEqC repeats None
Longitude 15.9
East
Latitude 51.4
North
Rotor speed in degree per second 000.5
Use USALS for this sat YES
Rotor is exclusively controlled by this dreambox yes
SCPC optimized search range no
-
Unfortunately the picture you have attached is not available.
I am currently recording something, so I can't check, but I will Tomorrow.
regards
PiGeon
-
Hi,
I have just replaced my DM7080HD with DM920, I have got one with the Multistream FBC TWIN TUNER.
I have decided to accompany it with the TripleTuner I used as a second tuner in the 7080.
The Inverto LNB (IDLB-QUDL42-UNR2L-1PP) is connected to the box via 2 cables.
The first, attached to the LNB1 port of the triple tuner, goes via the Dish motor to the Legacy port of the LNB.
The second, attached to the LNB1 port of the Twin FBC tuner, goes to the Unicable port of the LNB.
The configuration of the tuners is described below.
I had an issue that when switching to a channel on another satellite (Astra 19.2), the dish moved OK, but it didn't want to move the dish back after switching to a channel on the primarily used satellite (23.5E).
Changing the priority of the FBC tuner from "auto" to 1 solved it.
Everything seems to work now, except current config doesn't prevent it from moving the dish while recording a channel on Astra 23.5E
Well and yesterday evening I could see that one recording via the B1 tuner greyed out channels from all the other frequencies.
Can you please check the config and help me to find what's wrong in it?
Thanks in advance!
PiGeon
DREAMBOX DVB-S2X MS Multistream FBC TWIN TUNER
Tuner A1: BCM45308X (DVB-S2)
Configuration Mode Advanced
Satellite Astra 3A (23.5E)
LNB LNB1
Priority 1
Type Unicable
Unicable config mode Unicable LNB
Manufacturer Inverto
Type IDLB-QUDL42-UNI2L-1PP
Usable SCRs 1210 1420 1680 2040
Use PIN no
Increased voltage no
DiSEqC mode None
SCPC optimized search range no
Tuner A2: BCM45308X (DVB-S2)
Configuration Mode Inactive
TripleTuner
Tuner B1: Si2169C (DVB-S2 / DVB-C / DVB-T2)
Tuner type DVB-S2
Configuration mode simple
Mode Positioner
Longitude 15.9
East
Latitude 51.4
North
Rotor speed in degree per second 000.5
Rotor is exclusively controlled by this dreambox yes
SCPC optimized search range no
Tuner type DVB-C
Configuration mode inactive
Tuner type DVB-T2
Configuration mode inactive
Tuner B2: Si2169C (DVB-S2 / DVB-C / DVB-T2)
Tuner type DVB-S2
Configuration mode inactive
Tuner type DVB-C
Configuration mode inactive
Tuner type DVB-T2
Configuration mode inactive
-
Well, I didn't exactly think on these two guys, it was more in the direction, that any of them can ask their friends for help, to translate it faster.
-
Hi guys,
It's been few months I have started to solve the situation where since 1st of July Plex stopped to provide EPG for Czech TV channels .
Because I am not a developer and I don't understand python I have put together few PowerShell scripts which run on my Plex Server windows machine and pull the EPG from my dreambox.
And that's where I realized that there are holes in the EPG data on various channels.
It didn't occur to me before, because one never goes through the whole list of EPG events if all the events have the extended description.
For example on the Film Europe channel where it is worst, I can see the times and event tittles for 7days in to the future, but the extended description only for 4 days.
On other channels I could see blank descriptions in the middle of the list.
I have tried various things even the reset of epg.db, but the EPG never downloaded fully, there were always some blank places.
I have tried to configure the EPGrefresh plugin, from the time-based duration (120 seconds) to the automatic and then back and enhanced the time 400 seconds to overcome the issue, but it doesn't seem to help. In the journal log It looks like it stops the caching of events after much less than the 400 seconds e.g. around 100 seconds and then waits 60 minutes.
How can I troubleshoot it?
I remember in the past I was able to save the stream and extract the text stream from it, but I can't find how I did it, if it isn't just a made up story in my brain
Does anybody have an advice for me?
thanks
PiGeon
-
My bad, I should have mentioned that I thought so mainly, because then they could work on the translation in parallel, without doing a double work.
PiGeon
-
Wouldn't it be better to do the translation online on the pootle portal ?
Wurde es nicht besser die uebersetzung auf der pootle portal zu machen?
enigma2 and enigma2-plugins translations / pootle
have a nice Sunday
-
Hi Belp,
thanks for trying to help.
But I will leave the way I power it on, the way it has been since I bought it.
Because with the TV model I have, powering on the TV with dreambox works just a while.
Always only until the TV is in standby for a longer time, then the TV ends up in a state where it ignores any CEC commands.
This happens in 100% cases over night.I have just changed it little bit more to make it working better when changing the HDMI inputs on TV.
When I now change the HDMI source from HDMI1 (DM7080) to HDMI3 (NUC) the dreambox goes to standby and vice versa.
Attached are the screenshots with the options how I currently have it.regards
PiGeon
-
Yesterday I spent half of the day playing with the settings again, but without any influence on the issue.
In the end I came to the idea disconnect the TV from power supply and guess what?
it helped...
it looks like the TV cached something and disturbed the CEC communication somehow.PiGeon
-
It looks like there is to strong signal in the cable.
After I told him to try to put a splitter between the cable and tuner the channel search completed successfully.
Curiously the another subsequent scans without the splitter worked too.regards
PiGeon
-
Hi there
I have configured the box for my father in law at our place.
There was no issue with searching of the DVB-T/T2 channels even by running the search subsequently.
Today he went back to his place and when he tries the automatic search he gets immediately an error "search failed" or something similar.
However some of the DVB-T2 channels we found here at my place work also at his place, it looks like some of the multiplexes share the same frequency.Anyone any idea what could be wrong?
Code
Alles anzeigenJan 01 21:13:27 dm920 enigma2[277]: action -> SetupActions ok Jan 01 21:13:27 dm920 enigma2[277]: stopService Jan 01 21:13:27 dm920 enigma2[277]: allocating new converter! Jan 01 21:13:27 dm920 enigma2[277]: allocating new converter! Jan 01 21:13:27 dm920 enigma2[277]: allocating new converter! Jan 01 21:13:27 dm920 enigma2[277]: FIXMEE unknown frontend type in FrontendInfo getValue Converter return 0 (SAT) None Jan 01 21:13:27 dm920 enigma2[277]: FIXMEE unknown frontend type in FrontendInfo getValue Converter return 0 (SAT) None Jan 01 21:13:27 dm920 enigma2[277]: FIXMEE unknown frontend type in FrontendInfo getValue Converter return 0 (SAT) None Jan 01 21:13:27 dm920 enigma2[277]: reused converter! Jan 01 21:13:27 dm920 enigma2[277]: allocating new converter! Jan 01 21:13:27 dm920 enigma2[277]: allocating new converter! Jan 01 21:13:27 dm920 enigma2[277]: FIXMEE unknown frontend type in FrontendInfo getValue Converter return 0 (SAT) None Jan 01 21:13:27 dm920 enigma2[277]: FIXMEE unknown frontend type in FrontendInfo getValue Converter return 0 (SAT) None Jan 01 21:13:27 dm920 enigma2[277]: FIXMEE unknown frontend type in FrontendInfo getValue Converter return 0 (SAT) None Jan 01 21:13:27 dm920 enigma2[277]: reused converter! Jan 01 21:13:27 dm920 enigma2[277]: allocating new converter! Jan 01 21:13:27 dm920 enigma2[277]: allocating new converter! Jan 01 21:13:27 dm920 enigma2[277]: FIXMEE unknown frontend type in FrontendInfo getValue Converter return 0 (SAT) None Jan 01 21:13:27 dm920 enigma2[277]: FIXMEE unknown frontend type in FrontendInfo getValue Converter return 0 (SAT) None Jan 01 21:13:27 dm920 enigma2[277]: FIXMEE unknown frontend type in FrontendInfo getValue Converter return 0 (SAT) None Jan 01 21:13:27 dm920 enigma2[277]: ServiceScanCreateSummary Jan 01 21:13:27 dm920 enigma2[277]: scan: allocating raw channel (on frontend 0) failed! Jan 01 21:13:27 dm920 enigma2[277]: FIXMEE unknown frontend type in FrontendInfo getValue Converter return 0 (SAT) None Jan 01 21:13:27 dm920 enigma2[277]: create buffer for widget 900 x 1080 Jan 01 21:13:39 dm920 enigma2[277]: It's now Út 1. leden 2019, 21:13:38 CET Jan 01 21:13:39 dm920 enigma2[277]: [timer.py] next activation: 1546373718 (in 99000 ms) Jan 01 21:13:39 dm920 enigma2[277]: nr_read 354 nr_write 18466 Jan 01 21:13:39 dm920 enigma2[277]: sum 18820 prev_sum 18629 Jan 01 21:13:39 dm920 enigma2[277]: hdd was accessed since previous check! Jan 01 21:13:39 dm920 enigma2[277]: [IDLE] 0 600 False
happy new year!
PiGeon
-
Hi,
I have been using the TV to switch on my dreambox since ever, because my TV (Samsung LE46A950) never wanted to be switched on by dreambox.
This worked quite reliable until a recent update of my DM7080.Now whenever I switch the TV on, the dreambox starts too, but after few seconds the dreambox switches off again.
When I then switch the dreambox on too soon after that it switches on and few seconds later off again.
When I power on the dreambox again it stays on.I have tried to tune the CEC settings, but no success.
See my current settings screenshot and the log in the attached files.thanks for any hint
PiGeon
-
-
Today I have tried a different USB DVD drive.
DVD video discs play OK, but I couldn't find any way how to play CD audio discs.It however looks like the system sees the disc and all its 12 tracks like the previous device.
Any hint how to play the disc?thanks
PiGeon
Zitat
root@dm7080:~# /lib/udev/cdrom_id --debug /dev/cdrom
probing: '/dev/cdrom'
INQUIRY: [hp ][CDDVDW GP70N ][RR01]
current profile 0x08
profile 0x08 media_cd_rom
GET CONFIGURATION: size of features buffer 0x0178
GET CONFIGURATION: size of features buffer 0x0178
GET CONFIGURATION: feature 'profiles', with 14 entries
profile 0x15 <ignored>
profile 0x16 <ignored>
profile 0x2b dvd_plus_r_dl
profile 0x1b dvd_plus_r
profile 0x1a dvd_plus_rw
profile 0x14 dvd_rw
profile 0x13 dvd_rw
profile 0x12 dvd_ram
profile 0x11 <ignored>
profile 0x10 dvd_rom
profile 0x0a cd_rw
profile 0x09 cd_r
profile 0x08 cd_rom
profile 0x02 <ignored>
GET CONFIGURATION: feature 0x0001 <ignored>, with 0x08 bytes
GET CONFIGURATION: feature 0x0002 <ignored>, with 0x04 bytes
GET CONFIGURATION: feature 0x0003 <ignored>, with 0x04 bytes
GET CONFIGURATION: feature 0x0004 <ignored>, with 0x04 bytes
GET CONFIGURATION: feature 0x0010 <ignored>, with 0x08 bytes
GET CONFIGURATION: feature 0x001d <ignored>, with 0x00 bytes
GET CONFIGURATION: feature 0x001e <ignored>, with 0x04 bytes
GET CONFIGURATION: feature 0x001f <ignored>, with 0x04 bytes
GET CONFIGURATION: feature 0x0020 <ignored>, with 0x0c bytes
GET CONFIGURATION: feature 0x0021 <ignored>, with 0x08 bytes
GET CONFIGURATION: feature 0x0023 <ignored>, with 0x08 bytes
GET CONFIGURATION: feature 0x0024 <ignored>, with 0x04 bytes
GET CONFIGURATION: feature 0x0026 <ignored>, with 0x00 bytes
GET CONFIGURATION: feature 0x002a <ignored>, with 0x04 bytes
GET CONFIGURATION: feature 0x002b <ignored>, with 0x04 bytes
GET CONFIGURATION: feature 0x002c <ignored>, with 0x04 bytes
GET CONFIGURATION: feature 0x002d <ignored>, with 0x04 bytes
GET CONFIGURATION: feature 0x002e <ignored>, with 0x04 bytes
GET CONFIGURATION: feature 0x002f <ignored>, with 0x04 bytes
GET CONFIGURATION: feature 0x0033 <ignored>, with 0x08 bytes
GET CONFIGURATION: feature 0x0037 <ignored>, with 0x04 bytes
GET CONFIGURATION: feature 0x003b <ignored>, with 0x04 bytes
GET CONFIGURATION: feature 0x0100 <ignored>, with 0x04 bytes
GET CONFIGURATION: feature 0x0101 <ignored>, with 0x04 bytes
GET CONFIGURATION: feature 0x0103 <ignored>, with 0x04 bytes
GET CONFIGURATION: feature 0x0104 <ignored>, with 0x04 bytes
GET CONFIGURATION: feature 0x0105 <ignored>, with 0x04 bytes
GET CONFIGURATION: feature 0x0106 <ignored>, with 0x04 bytes
GET CONFIGURATION: feature 0x0107 <ignored>, with 0x04 bytes
GET CONFIGURATION: feature 0x0108 <ignored>, with 0x0c bytes
GET CONFIGURATION: feature 0x010a <ignored>, with 0x0c bytes
GET CONFIGURATION: feature 0x010b <ignored>, with 0x04 bytes
GET CONFIGURATION: feature 0x010c <ignored>, with 0x10 bytes
READ TOC: len: 108, start track: 1, end track: 12
track=1 info=0x0(audio) start_block=0
track=2 info=0x0(audio) start_block=18927
track=3 info=0x0(audio) start_block=30207
track=4 info=0x0(audio) start_block=46580
track=5 info=0x0(audio) start_block=65585
track=6 info=0x0(audio) start_block=92625
track=7 info=0x0(audio) start_block=118125
track=8 info=0x0(audio) start_block=126300
track=9 info=0x0(audio) start_block=133125
track=10 info=0x0(audio) start_block=142022
track=11 info=0x0(audio) start_block=174055
track=12 info=0x0(audio) start_block=186457
last track 1 starts at block 0
disk type 00
hardware reported media status: complete
ID_CDROM=1
ID_CDROM_CD=1
ID_CDROM_CD_R=1
ID_CDROM_CD_RW=1
ID_CDROM_DVD=1
ID_CDROM_DVD_R=1
ID_CDROM_DVD_RW=1
ID_CDROM_DVD_RAM=1
ID_CDROM_DVD_PLUS_R=1
ID_CDROM_DVD_PLUS_RW=1
ID_CDROM_DVD_PLUS_R_DL=1
ID_CDROM_MRW=1
ID_CDROM_MRW_W=1
ID_CDROM_MEDIA=1
ID_CDROM_MEDIA_CD=1
ID_CDROM_MEDIA_SESSION_COUNT=1
ID_CDROM_MEDIA_TRACK_COUNT=12
ID_CDROM_MEDIA_TRACK_COUNT_AUDIO=12 -
Hi Ghost,
ich bin zurueck nach einem Jahr, weil es letzte tage passiert wirklich oft.kannst du bitte nochmals ueberlegen ob da trotzdem was getan woerden koente.
Ich habe kein schanz es bei HBO beantragen so ihr seit wirklich die einzigen die damit was machen koennen.danke
PiGeon
-
Ja und exakt das zeigt doch auch das obere Datum der Dream an
OK
OS Build = Dreambox OS
aber
Version <> Imagewas mich ueberrascht ist dass ich ein Experimental image und noch so altes installiert habe