Hello,

I have a problem with the Dreambox 800 bought on November 11.
It is started from Sunday Nov. 30.
The first time the Dreambox after a shoot down don't turn on, It go to the 2nd boot, the one with the boot indicating the line of gradual progress, and then blocked.
After many time I proved to rewrite the firmware on flash and this time successful the
Dreambox boot regularly.
Later, when I rebooted I did go to shoot down, for boot again it need a lot of time
or blocked the boot and resets automatically. For recovery it need to reflash the firmware.

Yesterday, Friday Nov. 5 when returning home the Dreambox does not turn over the state of
standby, did not answer the remote or the button on Dreambox. I disconnected the plug, when I
inserted again remained blocked at first start with the words flash / wmlinux.gz. I tried to rewrite
the flash but not arrived in the second boot the one with the line of gradual progress. I rescript the
flash again and this time, following the video with the progress in % I discovered that the flash arrives
94% and immediately jumps to 100%. I tried to rewrite it again but this time with the serial cable but
This time it blocked the start of the 2nd boot, one with the line of status. After 2 attempts the
reboot is not getting more in the second boot, it always stopped at the first boot flash / wmlinux.gz

If you have any advice before I send it for repair / replacement I can easily follow your Sugerir.

Sincerly

Product Name DM800
Booloader version Dreambox Second Stage Loader BUILD #62, built 20080911
Flash Size 64 MB
Production Date (YYYY/MM/DD) 2008/10/13
mID 13
Serial Number 273xx
MAC Address 00:09:34:28:2x:xx

Hello,

I have rewritten the firmware with serial cable and selected "bads recovery sector" and now when I turn , the Dreambox sometimes goes to reboot all the time and sometimes it's stop with the image flash / wmlinux.gz.

This is the log of HyperTerminal done automatically when the dreambox it is in restart, if I can help for identify the problem ...

I will try to take the log even when the Dreambox is Blocked when writing / flash / wmlinux.gz

(c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BO23456}
2ND STAGE OK, build #67 (20081024)

0.000 - BCM board setup
0.022 - fp init
0.023 - ca init
0.724 - load config
dCA: not existent, loading defaults
0.755 - config loaded.
* press [S] to enter setup
OLED found!
BOOT #67(20081024)
detected jffs2 blocksize: 16kb
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++
dreamupd initialized
Scanning JFFS2 FS: . done.
/flash/bootlogo.elf
bootlogo size: 285065
using 1280x720p (60.00 Hz)
Using the Small jpeg decoder library, Copyright (c) 2006, Luc Saillard <luc@sail
lard.org>
parsing JPEG header..
JPEG Size: 1280x720
/flash/vmlinux.gz
Done initializing U0
found console= 0
HI WORLD!!!
gathering mode: 0x00000264 at 0x0xb000040c
split mode: 0x00000001 at 0xb0000410
board_init_once: regval=04ac6502, ddr_strap=3, 4 chips, pci_size=2
Detected 256 MB on board
cfeBootParms ===>
Number of Nand Chips = 0
Default command line =
root=/dev/mtdblock3 rootfstype=jffs2 rw mem=128M console=null
1 831ffee0 8303ab98
Kernel boot options: root=/dev/mtdblock3 rootfstype=jffs2 rw mem=128M console=nu
ll
Initial CP0 22 value : 0x00010020
Updated CP0 22 value : 0x00000020
CP0 reg 22 sel 0 to 5: 0xe3800000 0x00000020 0x00000000 0x00000020 0x00000000 0x
00000020
Sundry 0xb0404000, chipId 0x00007401, bcm7401Cx 0x21
CPU revision is: 00020000
Determined physical RAM map:
memory: 10000000 @ 00000000 (usable)
User-defined physical RAM map:
node [00000000, 08000000: RAM]
node [08000000, 08000000: RSVD]
<4>bootmem_init: map 0 type 1
<4>bootmem_init: curr_pfn 0x0000038b last_pfn 0x0000ffff max_low_pfn 0x00010000
<4>bootmem_init: Done
<7>On node 0 totalpages: 65536
<7> DMA zone: 65536 pages, LIFO batch:31
<7> Normal zone: 0 pages, LIFO batch:1
<7> HighMem zone: 0 pages, LIFO batch:1
Before resource_init
After resource_init
Built 1 zonelists
<5>Kernel command line: root=/dev/mtdblock3 rootfstype=jffs2 rw mem=128M console
=null
before init RAC 0x02a00000 0x00000000
after init RAC 0x02a0000f 0x0fff0000
Primary instruction cache 32kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 32kB, 2-way, linesize 16 bytes.
MIPS_CACHE_ALIASES = ON
end of ld_mmu_r4xx0
end of local_tlb_init
Wired: 17
Index: 0 pgmask=16Mb va=d0000000 asid=00
[pa=d0000000 c=2 d=1 v=1 g=1]
[pa=d1000000 c=2 d=1 v=1 g=1]

Index: 1 pgmask=16Mb va=d2000000 asid=00
[pa=d2000000 c=2 d=1 v=1 g=1]
[pa=d3000000 c=2 d=1 v=1 g=1]

Index: 2 pgmask=16Mb va=d4000000 asid=00
[pa=d4000000 c=2 d=1 v=1 g=1]
[pa=d5000000 c=2 d=1 v=1 g=1]

Index: 3 pgmask=16Mb va=d6000000 asid=00
[pa=d6000000 c=2 d=1 v=1 g=1]
[pa=d7000000 c=2 d=1 v=1 g=1]

Index: 4 pgmask=16Mb va=d8000000 asid=00
[pa=d8000000 c=2 d=1 v=1 g=1]
[pa=d9000000 c=2 d=1 v=1 g=1]

Index: 5 pgmask=16Mb va=da000000 asid=00
[pa=da000000 c=2 d=1 v=1 g=1]
[pa=db000000 c=2 d=1 v=1 g=1]

Index: 6 pgmask=16Mb va=dc000000 asid=00
[pa=dc000000 c=2 d=1 v=1 g=1]
[pa=dd000000 c=2 d=1 v=1 g=1]

Index: 7 pgmask=16Mb va=de000000 asid=00
[pa=de000000 c=2 d=1 v=1 g=1]
[pa=df000000 c=2 d=1 v=1 g=1]

Index: 8 pgmask=16Mb va=e0000000 asid=00
[pa=e0000000 c=2 d=1 v=1 g=1]
[pa=e1000000 c=2 d=1 v=1 g=1]

Index: 9 pgmask=16Mb va=e2000000 asid=00
[pa=e2000000 c=2 d=1 v=1 g=1]
[pa=e3000000 c=2 d=1 v=1 g=1]

Index: 10 pgmask=16Mb va=e4000000 asid=00
[pa=e4000000 c=2 d=1 v=1 g=1]
[pa=e5000000 c=2 d=1 v=1 g=1]

Index: 11 pgmask=16Mb va=e6000000 asid=00
[pa=e6000000 c=2 d=1 v=1 g=1]
[pa=e7000000 c=2 d=1 v=1 g=1]

Index: 12 pgmask=16Mb va=e8000000 asid=00
[pa=e8000000 c=2 d=1 v=1 g=1]
[pa=e9000000 c=2 d=1 v=1 g=1]

Index: 13 pgmask=16Mb va=ea000000 asid=00
[pa=ea000000 c=2 d=1 v=1 g=1]
[pa=eb000000 c=2 d=1 v=1 g=1]

Index: 14 pgmask=16Mb va=ec000000 asid=00
[pa=ec000000 c=2 d=1 v=1 g=1]
[pa=ed000000 c=2 d=1 v=1 g=1]

Index: 15 pgmask=16Mb va=ee000000 asid=00
[pa=ee000000 c=2 d=1 v=1 g=1]
[pa=ef000000 c=2 d=1 v=1 g=1]

Index: 16 pgmask=16Mb va=f0000000 asid=00
[pa=f0000000 c=2 d=1 v=1 g=1]
[pa=f1000000 c=2 d=1 v=1 g=1]

$$$$$$$$$$ 1394 dev id ffffffff
$$$$$$$$$$ mini slot dev id ffffffff
$$$$$$$$$$ external dev id ffffffff
$$$$$$$$$$SATA dev id 02421166
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
timer irq 68 end 57
PID hash table entries: 2048 (order: 11, 32768 bytes)
mips_counter_frequency = 148000000 from Calibration, = 148500000 from header(CPU
_MHz/2)
Using 148.501 MHz high precision timer.
################## brcm_serial_console_init, sercon=80315600