[b]Boxtyp:[Dreambox 5600]
[b]Firmwareversion[Release 1.06 vom 26.06.2004]
Hallo,
Ich hab ein seltsames problem mit einer Dreambox 5600.
Die Box hatte anfangs einen defekten Bootloader (5600 boot Laufschrift), den hab ich mittels JTAG neu eingespielt, jetzt bootet die Box zumindest bis zu den 4 Strichen auf dem Display, allerdings bleibt sie danach stehen. auf dem TV Bildschirm erscheint solange auf dem Display 5600 boot steht ein grünes bild, danach wenn die 4 Striche kommen wird das bild schwarz.
Als Image verwende ich das Original 1.06 Image
Flashprogramm: DreamUp 1.3.2.1
mit dem Hyperterminal erhalte ich folgenden Log:
Dreambox DM5620 004058D1 0050
Dreambox DM5620 - Bootloader V.1.01 - 25.04.2004 00509000 02000000
------- System Info --------ll root=/dev/mtdblock5 rootfs
Processor speed = 252 MHz
EBIU speed = 63 MHz
Uncompressing Li
Amount of RAM = 48 MByte
----------------------------
Automatic Boot: Enabled
----------------------------
1 - Toggle Power-On Tests
2 - Change a Boot Device
3 - Change IP Addresses
4 - Ping test
5 - Change Baud Rate for S1 Boot
D - Display Configuration
0 - Exit Menu and Boot Application
Dreambox DM5620
loaded at: 00500000 005B31F8
relocated to: 00400000 004B31F8
board data at: 004B0128 004B0168
relocated to: 00404C14 00404C54
zimage at: 00405150 0
avail ram: 004B4000 02000000
Linux/PPC load: console=ttyS0,115200 root=/dev/mtdblock5 rootfstype=squashfs ro
Uncompressing Linux...done.
Now booting the kernel
Linux version 2.4.20 (ghost@client) (gcc version 3.2.3) #8 Di Jun 8 19:17:39 CES
T 2004
IBM Redwood6 (STBx25XX) Platform
Port by MontaVista Software, Inc. (source@mvista.com)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,115200 root=/dev/mtdblock5 rootfstype=squashf
s ro
Console: colour dummy device 80x25
Calibrating delay loop... 251.49 BogoMIPS
Memory: 30676k available (1208k kernel code, 412k data, 76k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
OCP uart ver 1.6.2 init complete
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xe0040000 (irq = 20) is a 16550A
ttyS01 at 0xe0000000 (irq = 21) is a 165
ttyS01 at 0xe0000000 (irq = 21) is a 165
loop: loaded (max 8 devices)
dreambox: flash mapping: 800000 at 7f800000
disable flash VPP
Creating 6 MTD partitions on "DreamBOX rev3+":
0x00000000-0x00600000 : "DreamBOX cramfs"
0x00600000-0x007c0000 : "DreamBOX jffs2"
0x007c0000-0x00800000 : "DreamBOX OpenBIOS"
0x00000000-0x007c0000 : "DreamBOX (w/o bootloader)"
0x00000000-0x00800000 : "DreamBOX (w/ bootloader)"
0x00120000-0x00600000 : "DreamBOX SquashedFS"
IBM IIC driver v2.0
ibm-iic: using compatibility value for OPB freq, fix your board specific setup
i2c-core.o: adapter IBM IIC registered as adapter 0.
ibm-iic0: using standard (100 kHz) mode
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kmod: failed to exec /sbin/modprobe -s -k squashfs, errno = 2
VFS: Cannot open root device "mtdblock5" or 1f:05
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 1f:05
<0>Rebooting in 180 seconds..
Alles anzeigen
Image hab ich schon mehrmals installiert, auch das erase Image hab ich schon einige male draufgespielt.
Hat noch jemand nen Tip für mich, was das sein könnte, bzw wie ich die Box wieder zum laufen bringen kann ?
mfg Mike