Jtaging problem with windows

    anybody know from this log, that is the problem a bad solder or just that im trieing to jtag a a dm7000 in windows






    Code
    ***CPU and JTAG communicatin check***
====>cpu seems to be ok
***Memory check***
Flash Memory ID´s do not match! (should be 0x89 and 0x17)
Are you Sure this is a Dreambox DM7000s?



    the deal in here is i mistakenly bought a Intel Flash TE28F640 with a Dbox2 bootloader inside now im thinking is the bootloader in the chip fucking with me or did i just do a shitty soldering :face_with_tongue:

    DM 8000 SScc ,DM 7025-cc, DM 7000-s DM 500-s,t,c

    problem solved , just 2 legs under the chip were sorted with a tiny bit off solder

    DM 8000 SScc ,DM 7025-cc, DM 7000-s DM 500-s,t,c

    Hi
    i get the same answer from Jtag software.


    Here whats have happend.
    When i got home from work the display was lighning, no text.
    We have had a powerloss.
    No comms with dream up.
    Make a Jtag cable with 5 x 100 Ohms R and using the windows Jtag soft.
    It reports the same answer as you got.
    by misstake i shortned the pin 11 to ground and i was able to writte to the flash, now i can communicate with dream up ,flasherase works BUT
    i cant uppload any image, so probebly the IC 28F640J3 have passed away.


    Or is there any other solution here? some other software to Jtag with
    Thanks in adwance
    Lars in Sweden