Hello people !
I have a connection problem with the following configuration:
-dreambox 500s (gemini 2.40)
-DiSEqC 2.0 4x1 switch (Edision)
-dish 90 cm
-3 LNBs (Alps) mounted at multiholder:
1st (center) at HotBird (13E)
2nd (left) at Eutelsat W2 (16E)
3rd (left) at Astra (19,2E)
When I connect any of these LNBs directly (one by one) with the reciever they work fine but when I connect them all together using the DiSEqC switch the following happens:
1. The center LNB connected at port no. 1 of the switch still works fine (SNR and AGC rates above 90% + BER rate is zero)
2. 2nd and 3rd LNB (connected at port 2 and 3 of the switch) are working incorrectly i.e. signal quality is poor (SNR and AGC rates are around 70% + hi BER rate) esspecially at lower frequencies and the reception of the major transponders are lost - I get no Canal+, Cartoon.net, PlayboyTV
I am using the following sattelite configuration:
-4 sattelites via DiSEqC OPT A/B
1. HotBird (13E) AA
2. Eutelsat W2 (16E) AB
3. Astra (19,2E) BA
What could be the problem ?
Can it be that the dreambox 500s is incompatible with the DiSEqC 2.00 standard switch?