Help!
I have dreambox 7000 power went off when updating image now I get the yellow dreambox start-up but wont boot tried holding three buttons the one just stay on Dream Multimedia can I recover
Wont Boot
-
-
use a "nullmodem cable (crossed seriell cable)" and DreamUp to flash the box. takes a little bit longer but it works. make sure to press the connect button first in DreamUp and then turn the power of the dreambox on else you get no connect
-
Thanks Man Worked Like A Champ
-
Hello.Please i need help,i have the same problem....my DM7000s just show the pic.( booting up...) and don't go forward.I try reboot,Dreamup,jtag and is allways the same problem.....can you help on this???????Thanks.
-
Have you tried to pull the power cable for some hours?
After that try to use dreamup again.Olove
-
Hello,thanks for the reply.Yes,i plug out for 15min,1 hour and 5 hours always afther using again the Dreamup.always by the manual....The front painel show the same (Dream multimedia) and Tv (pic. from the last Davinci)......................what can i do now???????????????????????Thanks
-
Do you remember how this problem started ? If jtag does not cure it is probably a hardware fault.
-
Have you tried to download your Image again?
It may be that the one you're trying to use is broken.
I've had this problem once and it cost me some years of my life till I finally got itOlove
-
Hello.
Pcd,i have the DB from a frend and was the front painel black,no light no pic nothing.So i try the jtag, and afther was the front painel ok,and have pic on tv.I have load many img the last week but always the same just logo on tv and nothing more..........Olove, yes i try the same img many times ................Thanks people -
Try to make a bootlog with the null-modem-cable. A bootlog can tell you more than a bootpicture
-
Hello.I made again;
1* jtag windows-------OK
2*Dreamup (file erase)---------OK
3*Dreamup (file rel109 img)-------ok
Reboot and is the same problem,stay still just pic........el_tonno,i can't find the file you say....Bootlog!!!!!!Can you tell where?Thanks -
hello,i try the bootlogo but same problem,the problem is from Hardware?????????????????????????
-
A bootlog is no program to start.
If you are useing Windows, you have to use a program like "hyperterminal to log the serial device.
First you have to connect the Dm7000 with a serial Null-Modem-Cable with the pcThen start Hyperterminal (which is delivered with windows).
- Make a "New Connection" and give it a name. e.g. dreambox
- Then select the serial device. e.g. COM1
- Now you have to enter the Connection properties.
Bits per second = 115200
Data bits = 8
Parity = none
Stop bits = 1
Flow control = Hardware
- Now you are automatically connected with your dreambox
- Switch on your box
- When you see the "DM7000" in your terminal, immediately hammer on the "space bar" a view times. This will interrupt the boot process.
- now paste the following parameters at the end of the kernel command line options- After pressing "Enter" you will see the whole boot process. This will help us to analyze your boot problems.