Try to generate a new satellites.xml (google!) and put it to /etc/tuxbox/

Zitat von xbitta

Hi evewryone!

I have a new dreambox 800se,

the old decoder can see both satellites (astra+hotbird)

but his one always gives me as only option the hotbird, when I try to select astra from the simple config. A/B DSEC, etc.., I always get only either hotbird of "not connected" as an option.

I tried to reload the factory settings but same..

the older decoder that works fine shows as config: 2LNB, LNB1=universal, LNB2=universal, sat1diseqc-A=eutelsat,Sat2diseqc-B=astra, ton21 e 2=--, psupply LNB=ON.

any ideas?
thanks!

Alles anzeigen

Zitat von xbitta

Hi evewryone!

I have a new dreambox 800se,

the old decoder can see both satellites (astra+hotbird)

but his one always gives me as only option the hotbird, when I try to select astra from the simple config. A/B DSEC, etc.., I always get only either hotbird of "not connected" as an option.

I tried to reload the factory settings but same..

the older decoder that works fine shows as config: 2LNB, LNB1=universal, LNB2=universal, sat1diseqc-A=eutelsat,Sat2diseqc-B=astra, ton21 e 2=--, psupply LNB=ON.

any ideas?
thanks!

Alles anzeigen

no problem, Switch satellite: Sat A : Hotbird, Sat B: Astra