Also von hier aus ist alles erreichbar
Beiträge von dominikD
-
-
Kannst du dich immer noch ohne Passwort im telnet anmelden?
Oder meinst du die Absicherung des Webinterfaces mit Benutzer und Kennwortabfrage?
Gruß
Dominik
-
Auch hier alles OK, verwende jedoch Bucks Farb-Display.
Image ist ein aktuelles Merlin.
-
Have you tried to make a bootlog?
Does your box allways "boot" into STOP-Mode?
Does anything appear if you open your box' ip in your browser?
-
Mhh,
are you sure you got a 7020HDv2, i don't know if dreamUp should tell its a 7020HD or 7020HDv2 in case of an 7020HDv2. Here you can see a comperation of both Models, its in german but it should help you.
Have you tried to connect your box with the serial USB-Port, on the back side of your box, to your PC?
For that you have to install the USB to UART driver from here. Then you can choose the newly created virtual COM-Port in DreamUp to flash your box. -
Hi,
at first you schlud stop speaking about cams, it is not allowed here. Now to xour problem, you tried to flash an unsupported image which is not build for your box it is build for an old dm500.
You schuld try to flash the latest image from here, but make sure you use the v2 image, the others wont work. If this wont work try to flash this image with dreamup and serials usb connected.
-
Die privaten gehen nicht auf Fremdreceivern nur auf der Hardware von deinem Kabelanbieter.
-
Verwendest du für den externen Zugriff evtl das Login aktiviert? Wenn ja nach dem Flaschen ist kein Kennwort mehr gesetzt, dann könnte die von die beschriebene Meldung kommen.
Gruß
Dominik
-
Hallo,
also dein komplettes image kannst du mit dem PlugIn DFlash sichern. Da kommt dann eine Image-Datei raus die du komplett so wieder flashen kannst.
So hast du immer ein konfiguriertes image in der Hinterhand fals mal was schief läuft.Wie installierst du den Skin? Ganz normal über die Software-Verwaltung?
Gruß
Dominik
-
Dir fehlt eine Schriftart. Wenn ich das richtig lese der Font "Face".
Was für einen Skin willst du denn installieren? und wie installierst du ihn?
Wenn du ihn per ipk installierst musst du darauf achten, dass es die Version für OE2.0 und nicht OE1.6 ist. Da hat sich einiges getan soweit ich weiß.Gruß
Dominik
-
Hast du den GP3-Wizzard nach der Installation auch ausgeführt?
-
-
Habe gerade noch mal nachgeschaut, Sowohl im stable als auch im unstable feed gibt es das Paket. Müsste also installierbar sein.
Habe aber selber kein NN2 mehr, also am besten im newnigma2 board fragen.
Gruß
Dominik
-
Also eigentlich bist du mit NN2 hier falsch. Aber das EMC müsste eigentlich verfügbar sein, zumindest liegt es auf dem NN2-Feed.
Du könntest noch probieren das Paket enigma2-plugin-extensions-enhancedmoviecenter über Telnet zu installieren.
Gruß
Dominik
-
NTFS wird ja unterstützt aber unter Linux, insbesondere einer STB wie die dreambox, dauern die Zugriffe um einiges länger als mit einem Nativen-Dateisystem wie z.B. ext2/3/4.
Das wird auch schon das ganze Problem sein, da USB 3 zu USB 2 abwärtskompatibel sein sollte. -
Hi,
ich habe/hatte ein ähnliches Problem. Box hängt und Zahnräder. Konnte das Problem dann einschränken. Da das Thema hier aber nicht besprochen werden darf nur so viel hat was mit dem Empfang Verschlüsselter Sender im Zusammenspiel mit einer Smartcard zu tun
-
Good that it is working now.
Have fun with your dreambox.
-
So you did not try to flash an original Image?
Download the latest unstable from here. Then tell us again if it works or not.
-
Which image did you try to flash, please tell the full name of the file.
Maybe you have tried to flash an image for the "old" 7020HD without v2?How did you flash the box? With your browser or with DreamUp?
If you used your browser, have you tried to flash again with DreamUp?
Regards Dominik
-
As I remember twice flashing red light means that the batteries are empty. So try to change the batteries and report again.