It was under warranty, so I sent it back to Dream Multimedia and they made some solders (there were some short circuits). It works well now.
Beiträge von Calico
-
-
Hello,
I bought a few years ago a DM500HD and as there is a HDMI port, do you know if there are some future plans to have HDMI CEC support on this box ?
thanks for all.
-
Hi hope you don't mind me entering this discussion late as I have a similar problem of write failure when flashing.Can you tell me how to enter the bios so that I can resolve the problem please?
thank youFirst, you must have the DM500HD completely shutdown.
Then, you have to connect the USB cable to the USB Service port, and with a software like Hyperterminal get ready to capture the right COM port.
When you are ready, just hold the physical Power button in front of your DM500HD and you should see the BIOS screen on your computer
-
Well well.. before I begin to follow your guide, I tried to flash an older version of DM500HD image (2.7.1 - January 2010). I now get this and can't connect at all to the web interface when I do a long press on the power button :
Zitat
c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM500HDFIRST STAGE 1.0/400 {BO23456}
2ND STAGE OK, build #77 (20100127)
* secfpga broken (status ffc1)
status is sometimes 0004 and sometimes ffc1.
I can't even access to the BIOS so I returned it to my reseller in France which will send it back to DMM. Thanks for your help Homey
-
Hello everyone,
One night, I just understood that my Dreambox couldn't boot at all. (When powered on, it goes directly to the red fixed DEL).
I thought that the image was corrupt so I tried to flash it through the web interface (with a long press on the power button). I sended an official image and another one but the result was the same.
I got the same results by using Dreamup and a USB cable with the service port, booting with it, and then passing through the web interface to send the image, same result.
Then, I tried to use the Hyperterminal software in order to see what's happening when I power up my DM. It gives me that :
ZitatBCM74050011
012
K1
K2K3
K4
K5
Shmoo Version=3.2
DDR Freq=0x0000018C
%00000001%
RC1=00000002
WC1=FFFFFFF8
RC2=00000015
WC2=00000005
RC3=0000000B
WC3=FFFFFFF8
RC4=0000000B
WC4=00000043
NWC=0000001D
RC5=00000003
WC5=0000001D
RC6=00000014
WC6=0000001D
NRC=0000000B
RW=00000012
WW=0000004C
G=00000000 R=0000000B W=0000001D
BL=00000000
RC1=00000000
RC2=00000011BL=00000001
RC1=00000000
RC2=00000013BL=00000002
RC1=00000001
RC2=00000012BL=00000003
RC1=00000005
RC2=00000013BL=00000004
RC1=00000001
RC2=00000012BL=00000005
RC1=00000002
RC2=00000015BL=00000006
RC1=00000000
RC2=00000013BL=00000007
RC1=00000000
RC2=00000014
3
COPY CODE
COMPARE CODE
4567
(c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM500HDFIRST STAGE 1.0/400 {BO23456}
2ND STAGE OK, build #80 (20101014)
.
It doesn't go further. Each press on the power button gives me exactly this result.
I then tried to send an image through the web interface, and leaving my hyperterminal console on. I'm now getting this during the flash process:
Zitat
*** 002 checking CRC...
CRC check skipped.
nand-set-pen
oob: ff
start flashing...
01698000 bad
032c4000 bad
finished.Whatever image I'm trying, or browser, it seems that the same sectors are getting involved, and marked as "bad".
Please know that it's an original DM and that it worked well since months ago, even with all images I was sending to it.
Do you think that Flash memory is damaged, and should explain why it can't boot anymore ?
Thanks everyone for helping me about this.