I have solved my problem like this

DiSEqC repeats: One

I solved my problem like that
DiSEqC repeats: 1 (Normally, for 4 LNG= 1, 8 LNG= 2 suggested in Turkey Forum )

For you, I do'nt read any 2 diseqc problem in this forum. I read a lot Dreambox forum form Turkey and this. Some one solved with new Gemi (software), someone change equipment, but firstly you work on config parameter. You try below config and second DiSEqC:1.0 config. I hope it is suitable for you.
Satellite: 19.2E => 13E
Voltage mode: Polarization
Tone mode: Band
LNB: LNB 1 => LNB 2
DiSEqC: 1.1
Toneburst: None
Committed DiSEqC command: AA => AB
Fast DiSEqC: no
Sequence repeat: yes
Command order: commited, uncommited, toneburst
Uncommited DiSEqC command: Inpit 1 => Input 2
DiSEqC repeats: One------> Try this
LOF: Universal LNB
Increased voltage: no

Hi Kamilake,

I have same problem at Dreambox 800D, and below command. Maybe you solved problem with your hardware. Someone solved problem this config.Port A ----> Turksat

• advanced DiseqC 1.1 like this;

Confguration Mode: advanced
Satellite: 42E => 7E => 13E => 19.2E
Voltage mode: Polarization
Tone mode: Band
LNB: LNB 1 => LNB 2 => LNB 3 => LNB 4
DiSEqC: 1.1
Toneburst: None
Committed DiSEqC command: AA => AB => BA => BB
Fast DiSEqC: no
Sequence repeat: yes
Command order: commited, uncommited, toneburst
Uncommited DiSEqC command: Inpit 1 => Input 2 => Input 3 => Input 4
DiSEqC repeats: None
LOF: Universal LNB
Increased voltage: no

Hi Everybody,

I have same problem at Dreambox 800D, like my friend. I have Switch Master 411 DiseqC switch to which 4 Maximum LNB's are connected. I could try tuner config and found 1400 service, but then I closed my Dreambox without deep standby and have not connected any service , when I opened Dreambox. Then I have tried again searching service, but my box receives does not signal from LNB.
I tried following tuner configurations:

• simple DiseqC A/B/C/D

Port A ----> Turksat 42E
Port B ----> Eutelsat W3A 7E
Port C ----> Horbird 13E
Port D ---->Astra 19.2

• advanced DiseqC 1.0 (with default settings, only LNB ports changed)
• advanced DiseqC 1.1 like this;

Confguration Mode: advanced
Satellite: 42E => 7E => 13E => 19.2E
Voltage mode: Polarization
Tone mode: Band
LNB: LNB 1 => LNB 2 => LNB 3 => LNB 4
DiSEqC: 1.1
Toneburst: None
Committed DiSEqC command: AA => AB => BA => BB
Fast DiSEqC: no
Sequence repeat: yes
Command order: commited, uncommited, toneburst
Uncommited DiSEqC command: Inpit 1 => Input 2 => Input 3 => Input 4
DiSEqC repeats: None
LOF: Universal LNB
Increased voltage: no

• Q1 Satellite config form high freq to low freq,like 42E => 7E => 13E => 19.2E, is important or not, or I must do like this 42E => 19.2 => 13E => 7E ? (uncommitted&committed command and LNB is parallel same as Diseqc input)
  
• Q2 Is Dreambox 800HD support Switch Master SDS 411 Diseqc ? Is Switch Master SDS 411 Diseqc committed Diseqc or uncommitted Diseqc?
• Q3 Must I change our Diseqc?
• Q4 Does anybody know how to solve this problem? (I mean It is best question )

Hi Everybody,

I have Switch Master 411 DiseqC switch to which 4 Maximum LNB's are connected. I could try tuner config and found 1400 service, but then I closed my Dreambox without deep standby and have not connected any service , when I opened Dreambox. Then I have tried again searching service, but my box receives does not signal from LNB.
I tried following tuner configurations:

• simple DiseqC A/B/C/D

Port A ----> Turksat 42E
Port B ----> Eutelsat W3A 7E
Port C ----> Horbird 13E
Port D ---->Astra 19.2

• advanced DiseqC 1.0 (with default settings, only LNB ports changed)
• advanced DiseqC 1.1 like this;

Confguration Mode: advanced
Satellite: 42E => 7E => 13E => 19.2E
Voltage mode: Polarization
Tone mode: Band
LNB: LNB 1 => LNB 2 => LNB 3 => LNB 4
DiSEqC: 1.1
Toneburst: None
Committed DiSEqC command: AA => AB => BA => BB
Fast DiSEqC: no
Sequence repeat: yes
Command order: commited, uncommited, toneburst
Uncommited DiSEqC command: Inpit 1 => Input 2 => Input 3 => Input 4
DiSEqC repeats: None
LOF: Universal LNB
Increased voltage: no

• Q1 Satellite config form high freq to low freq,like 42E => 7E => 13E => 19.2E, is important or not, or I must do like this 42E => 19.2 => 13E => 7E ? (uncommitted&committed command and LNB is parallel same as Diseqc input)
  
• Q2 Is Dreambox 800HD support Switch Master SDS 411 Diseqc ? Is Switch Master SDS 411 Diseqc committed Diseqc or uncommitted Diseqc?
• Q3 Must I change our Diseqc?
• Q4 Does anybody know how to solve this problem? (I mean It is best question )