[Moderator]No help for clones here.[/Moderator]

1) Start dreamup
2) Press connect
3) Connect power to box
4) When error box pops up, press ok
5) use google search enforcer
6) Starta enforcer, drag it on front of dreamup and press enable.
7) now press flash button and chose a firmware
Flash progress will probably hang
9) Open dreamup again now try flash it trough serial only

did try this solution on 1pcs of dm800....

here is another workaround..

1) Connect a working DM600 to dreamup, press connect
2) insert com in the broken dm600, and press flash button.
3) Flash probably hangs
4) Open dreamup again now try flash it trough serial only

did try this on a dm800 that had stoped responding compleatley on serial and network flashing
and its now working again
//forhike

is there a way to use this tools on a dm800 ?

i get KeyError: 'dm800'

and when i lock in ripimage.py
i can only see

endianess = {"dm7025": "1234", "dm7020": "4321"}

would it be posibly to just add this

endianess = {"dm7025": "1234", "dm7020": "4321", "dm800": "1234"}

sems to work did just unpack a dm800 firmware

but i cant run buildimage always get error not a executive files or something.
tested on 2 computers, one with slackware and the other with debian