Zitat

Originally posted by confal44
Hi

look at you setting
Is you DHCP is selectionned ?

Try another supply,
Perhaps you must to sold two tantal 4.7uF

Best regards

Alles anzeigen

Hi confal44, thanks for the answere.
The first step i have controlled and the dhcp was ok, the second i tried too without result, regarding tantal 4,7uf could be, also because now the dream does not start at all even the display is on.
Please can you tell me or show with some picture which are the tantal 4.7uf, i am not pratic in elettronic. thanks again.

Hi friends, since last evening i have this problem on my dm 7020s, the lan is going to start and stop ( on/off ) continually and does not fix. Can someone give me an advise how to risolve this problem? Thanks a lot.

Gut, für alle, die Notwendigkeit, nur das Senden ein anderes firmware von Flash.

Hallo Freunde, ich habe dieses Problem auf meinem drembox 5620s.
Es wird nicht gestartet, auch wenn es das Bild geladen, es bleiben mit -- -- zu sehen.
Was kann ich tun, um risolve diese Probleme? Vielen Dank für die Hilfe.

Hi friends, i have this problem. My dm5620s doesn't start, it remain stady on display with -- --, it try to load the image, but to the end is always -- --
Can someone help me, thanks a lot.

Hi friends, i just want to inform that i get the S tuner and i have fixed it. It works very well, thanks to everyone for help.
p.s. if someone need the C Tuner for dream 600 0r 7025 can send me a pm. =)

Zitat

Originally posted by FeRgY
Hi.
Can You please attach closer picture ( zoomed ) from this label from tuner's face?

I have found out that exist a short version of this tuner, this one fix only the 7025, i have to change it.

Zitat

Originally posted by Playa4Life
Yes, it works.
I have done it, I changed the tuner in a DM600-C with a S tuner.
It is the same reciver, the only difference is the tuner
It is made so that you can change the tuner to the one you would like,
C, S or T.

Hi playa4life, i got the tuner, but i can not put it in the dream, because it does not entry in the box, it is to long, but i bought the right one. just watch
the pictures, have they send me a wrong one?

Zitat

Originally posted by Playa4Life

Nope, I think you can do it its not hard to do.
If you know how to use a philips screw driver
(and a small spanner? or pliers to screw out the two screws to the rs232 connector)
Just remove of the top and the back plate, then its plug and play.
It takes maby 5-10 minutes.
You have to change the back plate with the one that came in the box,
with your dreambox. (different once for C and S tuner)

When you have the new tuner in you hand,
you can see how its plugged in. plug and play

Just remember to unplug the Dreambox a while before you start!
And it could be smart to ground yourself, so that you dont fry your Dreambox with static electicity. (its like doing work inside a computer)

Alles anzeigen

Thanks a lot for the explaination I let you know how it will be.

Zitat

Originally posted by Playa4Life
Yes, it works.
I have done it, I changed the tuner in a DM600-C with a S tuner.
It is the same reciver, the only difference is the tuner
It is made so that you can change the tuner to the one you would like,
C, S or T.

Thanks a lot, is it a simply job? or must i bring to the assistent shop? =)

Zitat

Originally posted by m0rphU
http://www.dream-multimedia-tv.de/english/products_dm600.php
Tuner modules, Plug&Play

So buy a single DVB-S-Tuner and place it in your 600. The tuner is the same as for the DM7025...

Thanks friend, thats i knew, what i wanted to know is to be sure that it works. Maybe someone which has already done this operation can confirm it. Thanks again.

Hi, to everyone, while i have a dreambox 600 with cable tuner and i would like to switch on satellite, is it possible changing only the tuner with a DVB S one to get the satellite channels?? thank's for help and advices. ?