Lyngsat north america But the 7025 doesn't support epg for one of the most popular providers. ( Yet ) While the ppc series does.
Beiträge von smash
-
-
Googleing Boxman images is a good start
-
Please provide some information about the hard- and software used.
Box type:7025
GUI enigma2):Hi i've been looking for a lil while but i can't seem to find it in the sources... I've tried find -name '*.[ch]' | xargs grep -E 'NSTC' also tried FB_SYNC_NTSC and FB_SYNC_HD (probly impossible) in the enigma2 source but it's no avail... Where in enigma2 do we find the flags for switching video mode or were can we set the xilleon's video mode? I beleive it's somewhere else is this possible?
Also, is there a fbset type of function for the xilleon i can call from cmd ?Thanx for any help
-
If your going the 7020 route just get a figure 8 powercord for it. Then set to ntsc at the bootup screen and you should be good to go.
-
Why not put it in cvs ? I'm pretty sure all north americans would apreciate it.
-
Sometimes the "do not automatically update service list" option can be ticked.
If you have it then tick that. -
Please provide some information about the hard- and software used.
any
enigma1
Firmware version:latestHi there i was wondering what or were could i find the latest dreambox image pack/unpacking tools for i386? Is 0.04 the latest tools around ?
Thanx
-
Maybe your satellites.xml has duplicate transponders, have you checked that ?
-
You need a bouquet editor like dreamset or dreamboxedit .
-
Nameserver must be your isp's nameserver.
Why din't you listen when i told you first time that your cable wasnt good???
Next time listen -
Yes the dreambox has never been dishnetwork friendly. 0 epg is working and 0 scan is working. But the 7020 had made some progress from the anoncvs...
But it would be nice to see the 7025 and 7020 box support it natively one day... Would also be good for the 600 pvr to support it when it comes out and dm8000 to support it also. I find it extremely annoying that i cannot see any info about what i'm watching with my legal card on a 700 $ box...
Alot of ppl feel the same way, there just too shy to come forward about it, the others just refuse to buy it till it's corrected. -
Hi, what is the default sci port speeds ?
Looking to know for 7020 if there's any diff 7025 too thanx -
Thank you for clearing this up.
Why I was simply curious.
Don't worry boxes all run great!
(Well c'ept for the 7025's display on ntsc crt even for recorded movies) -
Hi i have a lil simple question:
Are boxman imaged boxes covered by warranty? -
Somehow i think that it is compiler related because i tried to make it outside oe (but with oe compilers)
and i get this error:
Code
Alles anzeigenmake[1]: Entering directory `/home/tuxbox-bb/newone/build/tmp/work/linux-dm7020-2.6.9-r4/linux-2.6.9' CC [M] /home/tuxbox-bb/hg/oebuild/src/zd1205.o In file included from include/linux/spinlock.h:13, from include/linux/capability.h:45, from include/linux/sched.h:7, from include/asm/uaccess.h:6, from include/net/checksum.h:25, from /home/tuxbox-bb/hg/oebuild/src/zd1205.c:35: include/linux/kernel.h:10:20: stdarg.h: No such file or directory In file included from include/linux/spinlock.h:13, from include/linux/capability.h:45, from include/linux/sched.h:7, from include/asm/uaccess.h:6, from include/net/checksum.h:25, from /home/tuxbox-bb/hg/oebuild/src/zd1205.c:35:
Same sources compile fine on my system for I686 ach
-
Not much has changed... 500s working great 7000 and 7020s too. All i see is dreaded ntsc issues at boot and even worse at first boot this is on all boxes. Umm the dm7025 on ntsc crt is terrible (frame skip/hopping problems) That should be looked at by dev but there is only handful of na ppl that have these units so this is why not many complaints...I have one if any dev wants me to try new things on it to remedy issue.
But I think he is not talking about what dream does but about what some ppl with free time provide for shady operations of the box But this is not dream-multimedia related.
-
When i try to make default image i get this error:
-I/home/tuxbox-bb/tuxbox-bb/build/tmp/staging/powerpc-linux/include -I/include -MT tuxtxt.lo -MD -MP -MF ".deps/tuxtxt.Tpo" -c -o tuxtxt.lo tuxtxt.c; \
then mv -f ".deps/tuxtxt.Tpo" ".deps/tuxtxt.Plo"; else rm -f ".deps/tuxtxt.Tpo"; exit 1; fi
mkdir .libs
powerpc-linux-gcc -DHAVE_CONFIG_H -I. -I/home/tuxbox-bb/tuxbox-bb/build/tmp/work/tuxbox-plugins-0.0+cvs20060831-r0/plugins/tuxtxt -I.. -I/home/tuxbox-bb/tuxbox-bb/build/tmp/staging/powerpc-linux/lib/../include -I/home/tuxbox-bb/tuxbox-bb/build/tmp/staging/powerpc-linux/lib/../include/freetype2 -I/home/tuxbox-bb/tuxbox-bb/build/tmp/work/tuxbox-plugins-0.0+cvs20060831-r0/plugins/include -I/usr/include/tuxbox/tuxtxt -I/home/tuxbox-bb/tuxbox-bb/build/tmp/staging/powerpc-linux/include -I/include -I/home/tuxbox-bb/tuxbox-bb/build/tmp/staging/powerpc-linux/include -I/include -I/home/tuxbox-bb/tuxbox-bb/build/tmp/staging/powerpc-linux/include -fexpensive-optimizations -fomit-frame-pointer -frename-registers -O2 -DOE -DHAVE_DREAMBOX_HARDWARE -DDREAMBOX -I/home/tuxbox-bb/tuxbox-bb/build/tmp/staging/powerpc-linux/include -I/include -MT tuxtxt.lo -MD -MP -MF .deps/tuxtxt.Tpo -c tuxtxt.c -fPIC -DPIC -o .libs/tuxtxt.o
CROSS COMPILE Badness: /usr/include in INCLUDEPATH: /usr/include/tuxbox/tuxtxt
cc1: internal compiler error: Aborted
Please submit a full bug report,
with preprocessed source if appropriate.
See <URL:http://gcc.gnu.org/bugs.html> for instructions.
make[4]: *** [tuxtxt.lo] Error 1
make[4]: Leaving directory `/home/tuxbox-bb/tuxbox-bb/build/tmp/work/tuxbox-plugins-0.0+cvs20060831-r0/plugins/tuxtxt'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/home/tuxbox-bb/tuxbox-bb/build/tmp/work/tuxbox-plugins-0.0+cvs20060831-r0/plugins/tuxtxt'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/home/tuxbox-bb/tuxbox-bb/build/tmp/work/tuxbox-plugins-0.0+cvs20060831-r0/plugins'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/home/tuxbox-bb/tuxbox-bb/build/tmp/work/tuxbox-plugins-0.0+cvs20060831-r0/plugins'
FATAL: oe_runmake failed[/code]My toolchecker run generates this :
Code
Alles anzeigencvs: 1.12.9 autoconf >= 2.57a: 2.59 automake >= 1.8: 1.8.5 libtool >= 1.4.2: 1.5.22 gettext >= 0.12.1: 0.14.5 make >= 3.79: 3.81 makeinfo: 4.8 tar: 1.15.1 bunzip2: 1.0.3 gunzip: 1.3.5 patch: 2.5.9 infocmp: 5.5.20051010 gcc 2.95 or >= 3.0: 4.0.3 g++ 2.95 or >= 3.0: 4.0.3 flex: 2.5.31 bison: 2.1 pkg-config: 0.20 wget: 1.10.2 mksquashfs 2.1 2.2-r2
This error comes on open dreambox 1.4 for dm7020 with default 1.4.2 bitbake. I've been pulling my hairs trying to find what is the problem... Could it be make version? Or gcc too high?
Thanx for anyones help!
-
Hi i hope someone can help.
I'm running kubuntu dapper and am very unsuccesful at compiling various parts of dreambox image.For example i try to build zd1211 ipk and i get:
Code
Alles anzeigenNOTE: make -e MAKEFLAGS= MODPATH={D}/lib/modules/2.6.9/kernel/drivers/net KERNEL_SOURCE=/home/tuxbox-bb/tuxbox-bb/build/tmp/staging/powerpc-linux/kernel KDIR=/home/tuxbox-bb/tuxbox-bb/build/tmp/staging/powerpc-linux/kernel KERNEL_VERSION=2.6.9 CC=powerpc-linux-gcc LD=powerpc-linux-ld /home/tuxbox-bb/tuxbox-bb/build/tmp/staging/powerpc-linux/kernel /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83 -I/home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/include -fomit-frame-pointer -O2 -Wall -Wstrict-prototypes -pipe -DZDCONF_WE_STAT_SUPPORT=1 -DHOST_IF_USB -DAMAC -DGCCK -DOFDM -DHOSTAPD_SUPPORT -DUSE_EP4_SET_REG -DDOWNLOADFIRMWARE -DfTX_GAIN_OFDM=0 -DfNEW_CODE_MAP=1 -DfWRITE_WORD_REG=1 -DfREAD_MUL_REG=1 -DENHANCE_RX=1 -DZD1211 src/zd1205.o src/zdasocsvc.o src/zdauthreq.o src/zdauthrsp.o src/zdmmrx.o src/zdshared.o src/zdhci.o src/zdglobal.o src/zdencrypt.o src/zdpmfilter.o src/zdpsmon.o src/zdsynch.o src/zdbuf.o src/zd1205_proc.o src/zdhw.o src/zddebug.o src/zdtkipseed.o src/zdmic.o src/zdusb.o src/zd1211.o make -C /home/tuxbox-bb/tuxbox-bb/build/tmp/staging/powerpc-linux/kernel SUBDIRS=/home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83 modules make[1]: Entering directory `/home/tuxbox-bb/tuxbox-bb/build/tmp/staging/powerpc-linux/kernel' CC [M] /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.o In file included from include/asm/machdep.h:8, from include/asm/irq.h:6, from include/asm/hardirq.h:8, from include/linux/hardirq.h:6, from include/asm-generic/local.h:6, from include/asm/local.h:4, from include/linux/module.h:21, from include/net/sock.h:47, from include/linux/ip.h:84, from include/linux/tcp.h:195, from /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.c:36: include/asm/setup.h:8:28: asm-m68k/setup.h: No such file or directory In file included from include/asm/irq.h:27, from include/asm/hardirq.h:8, from include/linux/hardirq.h:6, from include/asm-generic/local.h:6, from include/asm/local.h:4, from include/linux/module.h:21, from include/net/sock.h:47, from include/linux/ip.h:84, from include/linux/tcp.h:195, from /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.c:36: include/asm/ibm4xx.h:39:34: platforms/4xx/dm70xx.h: No such file or directory In file included from include/asm/irq.h:27, from include/asm/hardirq.h:8, from include/linux/hardirq.h:6, from include/asm-generic/local.h:6, from include/asm/local.h:4, from include/linux/module.h:21, from include/net/sock.h:47, from include/linux/ip.h:84, from include/linux/tcp.h:195, from /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.c:36: include/asm/ibm4xx.h:93: error: parse error before "__res" include/asm/ibm4xx.h:93: warning: type defaults to `int' in declaration of `__res' include/asm/ibm4xx.h:93: warning: data definition has no type or storage class /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.c:465: error: redefinition of 'wait_ms' include/linux/usb.h:24: error: previous definition of 'wait_ms' was here /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.h:1279: warning: 'zd_readl' declared inline after being called /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.h:1279: warning: previous declaration of 'zd_readl' was here /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.c: In function `zd1205_validate_frame': /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.c:2809: warning: unused variable `len1' /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.c: In function `zd1205wext_iw_get_stats': /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.c:4777: error: structure has no member named `iw_stats' /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.c: In function `zd1205_translate_scan': /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.c:7183: warning: int format, U32 arg (arg 4) /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.c:7183: warning: unknown conversion type character `,' in format /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.c:7183: warning: spurious trailing `%' in format /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.c:7183: warning: int format, U32 arg (arg 4) /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.c:7183: warning: unknown conversion type character `,' in format /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.c:7183: warning: spurious trailing `%' in format /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.c: In function `zd1205_list_bss': /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.c:7388: warning: int format, U32 arg (arg 2) /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.c:7388: warning: spurious trailing `%' in format /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.c: In function `zdcb_setup_next_send': /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.c:9151: warning: initialization makes integer from pointer without a cast /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.c:9195: warning: initialization makes integer from pointer without a cast /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.c:9230: warning: initialization makes integer from pointer without a cast /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.c:9259: warning: initialization makes integer from pointer without a cast /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.c: In function `CalculateQuality': /home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.c:10074: warning: unused variable `rxOffset' make[2]: *** [/home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83/src/zd1205.o] Error 1 make[1]: *** [_module_/home/tuxbox-bb/tuxbox-bb/build/tmp/work/zd1211-r83-r1/zd1211-driver-r83] Error 2 make[1]: Leaving directory `/home/tuxbox-bb/tuxbox-bb/build/tmp/staging/powerpc-linux/kernel' make: *** [all] Error 2 FATAL: oe_runmake failed