Beiträge von cellie

  • DTS passthrough DM800

    Hab mich ne NMT (PCH) zugelegt.


    Mich fallt auf das die gleiche 'probleme' (wie in dieser thread) auch auf das NMT board spielen.


    Ich mochte noch aufmerken das mein startpost (hoert sich krass an) nicht als kritik or so etwas gemeint war. Mochte nur wissen ob as sinnvoll war um langer zu warten.


    Danke DMM fur ein gute SAT receiver. Das das gerat auch andere formate teilweise spielt is nur extra.

  • DTS passthrough DM800

    Ich wurde mich sehr freuen wann mein DM800 in die lage war um wenigstens DTS passthrough zu machen.
    Gibts technische grunden warum das bis heute nicht moglich ist?
    Kann ich noch hoffnung auf ein losung haben?
    Es ist ja auch gelungen mit der DM8000.

  • 7025 & 800 nfs warning: mount version older than kernel

    I am having a slight problem with my DM800 and DM7025+.


    I used the search, but it only came up with people unable to share. Sharing works for me but not that snappy.


    Recordings are done via NFS mount to a Ubuntu Server 8.04 box. Now if I start a recording, it takes up to a minute to get the recording running. Eventually it works, and once started it runs fine.


    /etc/auto.hotplug:

    Code
    atom-movies -fstype=nfs,rw,nolock,nfsvers=2,rsize=8192,wsize=8192 192.168.2.2:/media/dreambox


    There is a symlink /hdd/movie to /autofs/atom-movies


    dmesg on the 7025 says:

    Code
    nfs warning: mount version older than kernel


    I see no messages on the NFS server that look relevant.


    For the record, my /etc/exports:

    Code
    /media/dreambox	*(rw,sync,subtree_check)
/media/storage	*(rw,sync,subtree_check)


    Both SD and HD recordings take a long time to get started.
    I fiddled around with the settings but can't come up with a setting that responds faster.
    Am I doing something wrong, or is this normal?

  • [7025SS] Tune problem after zapping.

    Sometimes (actually quiet frequently) when I change channels it happens that the dreambox refuses to tune to certain channels. For example when I zap from RTL4 to RTL8 (CDS NL 19.2e) the box comes up with a 'tune failed' error. Sometimes it tunes after I wait a bit, sometimes I have to switch to another transponder/satellite and then back so it tunes again.
    On other positions (13.0e, 23.5e and 28.2e) I have the same problem.
    The problem exists with both the recent DMM and other images. A friend of mine has the same problems.


    I changed the sat feeds from my DM7000 and DM500 to the DM7025 to rule out a cabling or other problem, but it seems that it is either a hardware or software problem. The problem persists on my DM7025 while the other boxes tune fine. Once tuned, the SNR, AGC and BER seem fine. ( 88%, 90% and 0 )


    Working with different 4-to-1 DiSEqC switches (all setup the same) and quad LNBs, but it seems it is unrelated to which I use.