The one thing i did different is step 4.

Zitat

step 4 a. create the file /etc/sysconfig/network-scripts/ifcfg-ra0 (and path if it does not exists)

add following to te file

DEVICE='ra0'
ONBOOT='yes'
BOOTPROTO='dhcp'

step 4 b.
Now add the "modprobe" in file /etc/init.d/bootup

for mod in isofs cifs nfsd usb-storage sd autofs4 vfat sd_mod ide-cd cdfs rt2870sta; do
modprobe $mod
done

Alles anzeigen

My driver is complied on the source "2009_0521_RT2870_Linux_STA_V2.1.2.0.tgz" from ralink's web site. Now i'm trying to compile the latest
source

Sorry, that i haven't looked at this for a long time i could have helped you I don't have a Dm800, i only borrowed it for a while.

I think that that the driver "wlan-rt2870_no_wpa_support.tar.gz" is named wrongly by me (if it's mine you use) it works with WPA, and is compiled if your systen dont have wpa support.

It would be fun if someone left some feedback on the drivers

well i have about 5 m between router and the dm800, no walls. because it's a test setup

Here are the drivers, should work with following device id's

Zitat

/* module table */
struct usb_device_id rtusb_usb_id[] = {
#ifdef RT2870
{USB_DEVICE(0x148F,0x2770)}, /* Ralink */
{USB_DEVICE(0x148F,0x2870)}, /* Ralink */
{USB_DEVICE(0x07B8,0x2870)}, /* AboCom */
{USB_DEVICE(0x07B8,0x2770)}, /* AboCom */
{USB_DEVICE(0x0DF6,0x0039)}, /* Sitecom 2770 */
{USB_DEVICE(0x083A,0x7512)}, /* Arcadyan 2770 */
{USB_DEVICE(0x0789,0x0162)}, /* Logitec 2870 */
{USB_DEVICE(0x0789,0x0163)}, /* Logitec 2870 */
{USB_DEVICE(0x0789,0x0164)}, /* Logitec 2870 */
{USB_DEVICE(0x177f,0x0302)}, /* lsusb */
{USB_DEVICE(0x0B05,0x1731)}, /* Asus */
{USB_DEVICE(0x0B05,0x1732)}, /* Asus */
{USB_DEVICE(0x0B05,0x1742)}, /* Asus */
{USB_DEVICE(0x0DF6,0x0017)}, /* Sitecom */
{USB_DEVICE(0x0DF6,0x002B)}, /* Sitecom */
{USB_DEVICE(0x0DF6,0x002C)}, /* Sitecom */
{USB_DEVICE(0x0DF6,0x002D)}, /* Sitecom */
{USB_DEVICE(0x14B2,0x3C06)}, /* Conceptronic */
{USB_DEVICE(0x14B2,0x3C28 )}, /* Conceptronic */
{USB_DEVICE(0x2019,0xED06)}, /* Planex Communications, Inc. */
{USB_DEVICE(0x07D1,0x3C09)}, /* D-Link */
{USB_DEVICE(0x07D1,0x3C11)}, /* D-Link */
{USB_DEVICE(0x14B2,0x3C07)}, /* AL */
{USB_DEVICE(0x050D,0x8053)}, /* Belkin */
{USB_DEVICE(0x14B2,0x3C23)}, /* Airlink */
{USB_DEVICE(0x14B2,0x3C27)}, /* Airlink */
{USB_DEVICE(0x07AA,0x002F)}, /* Corega */
{USB_DEVICE(0x07AA,0x003C)}, /* Corega */
{USB_DEVICE(0x07AA,0x003F)}, /* Corega */
{USB_DEVICE(0x1044,0x800B)}, /* Gigabyte */
{USB_DEVICE(0x15A9,0x0006)}, /* Sparklan */
{USB_DEVICE(0x083A,0xB522)}, /* SMC */
{USB_DEVICE(0x083A,0xA618 )}, /* SMC */
{USB_DEVICE(0x083A,0x8522)}, /* Arcadyan */
{USB_DEVICE(0x083A,0x7522)}, /* Arcadyan */
{USB_DEVICE(0x0CDE,0x0022)}, /* ZCOM */
{USB_DEVICE(0x0586,0x3416)}, /* Zyxel */
{USB_DEVICE(0x0CDE,0x0025)}, /* Zyxel */
{USB_DEVICE(0x1740,0x9701)}, /* EnGenius */
{USB_DEVICE(0x1740,0x9702)}, /* EnGenius */
{USB_DEVICE(0x0471,0x200f)}, /* Philips */
{USB_DEVICE(0x14B2,0x3C25)}, /* Draytek */
{USB_DEVICE(0x13D3,0x3247)}, /* AzureWave */
{USB_DEVICE(0x083A,0x6618 )}, /* Accton */
{USB_DEVICE(0x15c5,0x0008 )}, /* Amit */
{USB_DEVICE(0x0E66,0x0001)}, /* Hawking */
{USB_DEVICE(0x0E66,0x0003)}, /* Hawking */
{USB_DEVICE(0x129B,0x1828 )}, /* Siemens */
{USB_DEVICE(0x157E,0x300E)}, /* U-Media */
{USB_DEVICE(0x050d,0x805c)},
{USB_DEVICE(0x050d,0x815c)},
{USB_DEVICE(0x1482,0x3C09)}, /* Abocom*/
{USB_DEVICE(0x14B2,0x3C09)}, /* Alpha */
{USB_DEVICE(0x04E8,0x2018 )}, /* samsung */
{USB_DEVICE(0x5A57,0x0280)}, /* Zinwell */
{USB_DEVICE(0x5A57,0x0282)}, /* Zinwell */
{USB_DEVICE(0x7392,0x7718 )},
{USB_DEVICE(0x7392,0x7717)},
{USB_DEVICE(0x1737,0x0070)}, /* Linksys WUSB100 */
{USB_DEVICE(0x1737,0x0071)}, /* Linksys WUSB600N */
{USB_DEVICE(0x0411,0x00e8 )}, /* Buffalo WLI-UC-G300N*/
{USB_DEVICE(0x050d,0x815c)}, /* Belkin F5D8053 */
#endif // RT2870 //
{ }/* Terminating entry */
};

Alles anzeigen

Hope this will help someone

I've tested the transfer speed.

Got 1.1-1.3 Mb/s on upload/download with G , when i use mixed mode G/N without making any changes to the config other than g/N mixed.
then i reached 2.2 - 2.5 Mbs at peek.

/Gmack

sorry not at home at the moment... (will get back with more detail later)

No, i'm using a linksys wusb600n.

ps here are my iwconfig

Zitat

root@dm800:~# iwconfig
eth0 no wireless extensions.

lo no wireless extensions.

ra0 RT2870 Wireless ESSID:"home1" Nickname:"RT2870STA"
Mode:Managed Frequency=2.472 GHz Access Point: 00:22:B0:C7:0F:0E
Bit Rate=54 Mb/s
RTS thr:off Fragment thr:off
Encryption key:xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xxxx[3]
Link Quality=100/100 Signal level:-53 dBm Noise level:-71 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

root@dm800:~#

Alles anzeigen

Sorry to here that, i got it to work but this driver i not for linksys wusb600n. i followed this http://translate.google.com/tr…ess-d-link-dwa-140-a.html

but needed another driver.

First i most say that I'm a newbie.

I think this usb wifi use Ralink RT2571W chipset. and the driver that comes with most images is for the RT73 chipset.

But i found this. http://ubuntuforums.org/showthread.php?t=836577

if that doesnt wor you need to comilpe the driver.

this driver is not compiled for linksys wusb600n (i think)

@ste71m

What model of usb wifi stick do you use ? i tried this one on a linksys wusb600n and it did not work.

Zitat

Take it here Tested long time ago and working. One problem - you cant configure wireless by GUI...Need edit RT2870STA.dat.

Unpack ZIP
Install rt2870sta.tar.gz
Create directory /etc/Wireless/RT2870STA
Copy RT2870STA.dat to /etc/Wireless/RT2870STA and configure it (learn README_STA)
modprobe rt2870sta
Be happy;)

Alles anzeigen

If you use this command "cat /proc/bus/usb/devices"

What does it say (the part about usb wifi...)
it should look like this

Zitat

T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=07d1 ProdID=3c09 Rev= 1.01
S: Manufacturer=Ralink
S: Product=802.11 n WLAN
S: SerialNumber=1.0
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=450mA
I: If#= 0 Alt= 0 #EPs= 7 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Alles anzeigen

Hi !

I'm trying to get a linksys wusb600n to work i think the chip inside is a rt2870, and have followd this
800 wireless n

Zitat

Take it here Tested long time ago and working. One problem - you cant configure wireless by GUI...Need edit RT2870STA.dat.

Unpack ZIP
Install rt2870sta.tar.gz
Create directory /etc/Wireless/RT2870STA
Copy RT2870STA.dat to /etc/Wireless/RT2870STA and configure it (learn README_STA)
modprobe rt2870sta
Be happy;)

Alles anzeigen

and also added rt2870sta to the modprobe in /etc/init.d/bootup

when i writes the command "lsmod | grep rt2870" i get

Zitat

rt2870sta 629312 0 - Live 0xc0258000

when i use the "dmesg" command

Zitat

hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0002
brcm-ehci brcm-ehci.0: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
brcm-ehci brcm-ehci.0: port 1 high speed
brcm-ehci brcm-ehci.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
usb 1-1: new high speed USB device using brcm-ehci and address 2
brcm-ehci brcm-ehci.0: port 1 high speed
brcm-ehci brcm-ehci.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
usb 1-1: default language 0x0409
usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Dual-Band Wireless-N USB Network Adapter
usb 1-1: Manufacturer: Cisco-Linksys LLC
usb 1-1: hotplug
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usb 1-1:1.0: hotplug

Alles anzeigen

and when i check devices ""cat /proc/bus/usb/devices"

Zitat

Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1737 ProdID=0071 Rev= 1.01
S: Manufacturer=Cisco-Linksys LLC
S: Product=Dual-Band Wireless-N USB Network Adapter
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=450mA
I: If#= 0 Alt= 0 #EPs= 7 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Alles anzeigen

and i still doesnt work.

is ther someting else i should do, there is no ra0 created at boot.

Has anyone got this to work ?

/Gmack

Sorry for writing in English , my german is "read level only"

It looks like i have the same problem with the libfx2 lib, i want to use FBdrawString function in draw.h/c i get the following message
"/var/tuxbox/plugins/testsplugin.so: undefined symbol: _Z12FBDrawStringiiiPchh"

any suggestion what i should add instead of -ljpeg in "$(CXX) -ljpeg -shared -Wall ..."?