Ok, not so fast !
the last version is nice and works perfectly with DB7025, but you must in options, click on "version 3 settings - db7025", this gonna change the paths , and make the software works nice with db7025....
All is ok here !
tkz everybody
Ok, the trick is easy !
You choose the lnb A,B,C,D (i.e)
so you go to manual scan, and chosse a SINLE - ADVANCED - satellite, choose, the CBAND satellite and fill the LOF (i.e - 5150)- DO NOT put cband, otherway it only scand the cband dish ! , save and exit, scan.... it gonna find the low frequency (5150 for cband) and when it finishes it gonna find for ku....
Work pretty well here !
THANKZ FOR ALL
To me the thing works a bit different, but tkz for all anyway !!!
I turn on the dreambox, start the dreamup, it shows the ips....
I turno off the dreambox and click on the dreamup connect, start the dreambox.
[Blockierte Grafik: http://img92.imageshack.us/img92/2029/flash015un.th.jpg]
so I open a browser and use the ip that dreamup showed.... and click on the firmware upgrade on browser.... a new screen comes on !
[Blockierte Grafik: http://img92.imageshack.us/img92/7233/flash026lm.th.jpg]
I "browse" the place where image is located.... and click on flash...
[Blockierte Grafik: http://img150.imageshack.us/img150/7592/flash036nf.th.jpg]
the flash procedures beggins faster and ends faster.... click on disconect on
dreamup and is it ok !!!
restart the box, new image is on !
TKZ FRIENDS YOU SHOWED ME THE WAY 
To me the thing works a bit differente !
I turn on the dreambox, start the dreamup, it shows the ips....
I turno off the dreambox and click on the dreamup connect, start the dreambox.
[Blockierte Grafik: http://img92.imageshack.us/img92/2029/flash015un.th.jpg]
so I open a browser and use the ip that dreamup showed.... and click on the firmware upgrade on browser.... a new screen comes on !
[Blockierte Grafik: http://img92.imageshack.us/img92/7233/flash026lm.th.jpg]
I "browse" the place where image is located.... and click on flash...
[Blockierte Grafik: http://img150.imageshack.us/img150/7592/flash036nf.th.jpg]
the flash procedures beggins faster and ends faster.... click on disconect on
dreamup and is it ok !!!
restart the box, new image is on !
ZitatOriginally posted by DieMade
Again: 192.168.0.24 is shown in the dropdown list "select one:". That means, this IP is assigned to the PC as well and you can't use it for the Dreambox.
Just use any other free IP for the Dreambox (192.168.0.11 for example).
When booting via DreamUp the Box does not use any internal settings from the firmware - it will use the IP you enter in "Remote IP (Box)"
You were right ! I changed the range to 192.1681.X and I can see the browser interface ! but stills showing the message "calculating checksum" how long it takes? I´m waiting at least 20 minutes and nothing changed.,...
Tkaz !
I experienced the same problem, because that was a version bugged "image",
so I flashed with a new image and it worked ok !
ZitatAlles anzeigenOriginally posted by DieMade
What is the real IP of your PC? You assigned 192.168.0.1 but the dropdownlist for the local IP ("select one:") shows 192.168.0.24 as a local IP too.
You assgined this IP (.24) to the Dreambox wich means that Dreamup tries to talk to itself instead to the box.
DreamUp should have shown a warning after you pressed the "Connect" button complaining about this IP (.24) stating that this is not a Dreambox.
To make it clear: "select one:" shows local IP addresses for the PC. This IPs are allocated by windows for the PC and may not be used as IP for the Dreambox (maybe I should check even this rare situation).
Please check your network configuration for DreamUp and try again.
I got here 2 ethernet cards on pc !
1-> to internet ip. 200.XXX.XXX.XXX
2-> to dreambox ip 192.168.0.1 - sub 255.255.255.0
in the DB the settings are ip 192.168.0.24 - sub 255.255.255.0
gateway is 192.168.0.1 <- is that right ?
When I try to use the "real" ip, the "calculating checkum" appears and nothing happens, the process frozes
Tkz
Ok, folks, my problem is that
I got two different dishes, 1 to cband and 1 to ku, I use a disec so
in my older box, I could saw it working perfect
In DB7025 I try to scan in sattelite menu, but it doesnt work, it only finds the ku sattelite....
Some hint to make it works ?
[Blockierte Grafik: http://img210.imageshack.us/img210/7198/antena14sn.th.jpg]
Thank you
How to edit sattelites.xml?
I´m trying to edit the sattelites.xml but is really hard !
What I´ve tried?
first I run the last version of dreamedit (1.90.02 - http://dreambox.happyllama.com/)
change the settings to DB7025
[Blockierte Grafik: http://img215.imageshack.us/img215/3149/dreameditb7tr.th.jpg]
Save, connect ftp, and... ERROR when trying to get DB information :Z
[Blockierte Grafik: http://img86.imageshack.us/img86/2023/dreamedit9uv.th.jpg]
What can it be? some suggestion?
Thanks all
Ooppppppppps the log says:
Info 2006-04-11 21:31:33 Starting FTP Download from Dreambox.
Info 2006-04-11 21:31:33 Connecting to 192.168.0.24.
Info 2006-04-11 21:31:33 Goodbye.
Info 2006-04-11 21:31:33 Connected.
Info 2006-04-11 21:31:33 Goodbye.
Info 2006-04-11 21:31:33 Dreambox response: Login successful.
Info 2006-04-11 21:31:33 ** Retrieving file list of "/etc/enigma2/" **
Info 2006-04-11 21:31:33 Starting FTP transfer
Info 2006-04-11 21:31:33 Switching to ASCII mode.
Info 2006-04-11 21:31:33 Transfer complete
Info 2006-04-11 21:31:33 Here comes the directory listing.
Info 2006-04-11 21:31:33 Files on Dreambox in /etc/enigma2/:
Info 2006-04-11 21:31:33 - /etc/enigma2/bouquets.radio
Info 2006-04-11 21:31:33 - /etc/enigma2/bouquets.tv
Info 2006-04-11 21:31:33 - /etc/enigma2/config
Info 2006-04-11 21:31:33 - /etc/enigma2/userbouquet.favourites.radio
Info 2006-04-11 21:31:33 - /etc/enigma2/userbouquet.favourites.tv
Info 2006-04-11 21:31:33 ** Retrieving file list of "/etc/enigma2/" **
Info 2006-04-11 21:31:33 Starting FTP transfer
Info 2006-04-11 21:31:33 Switching to ASCII mode.
Info 2006-04-11 21:31:33 Transfer complete
Info 2006-04-11 21:31:33 Here comes the directory listing.
Info 2006-04-11 21:31:33 Files on Dreambox in /etc/enigma2/:
Info 2006-04-11 21:31:33 - /etc/enigma2/bouquets.radio
Info 2006-04-11 21:31:33 - /etc/enigma2/bouquets.tv
Info 2006-04-11 21:31:33 - /etc/enigma2/config
Info 2006-04-11 21:31:33 - /etc/enigma2/userbouquet.favourites.radio
Info 2006-04-11 21:31:33 - /etc/enigma2/userbouquet.favourites.tv
Error 2006-04-11 21:31:33 Neither a "services" nor a "lamedb" file was found in directory "/etc/enigma2/" on the Dreambox.
Info 2006-04-11 21:31:33 Disconnecting.
Info 2006-04-11 21:31:33 Goodbye.
Info 2006-04-11 21:31:33 Disconnected.
Info 2006-04-11 21:31:33 Goodbye.
Error 2006-04-11 21:31:33 There were errors retrieving the files from the Dreambox.
Check the log for more information.
try to flash your box, it will help
Please provide some information about the hard- and software used.
Box type: 7025
GUI (enigma1/enigma2):enigma 2
Firmware version: gemini project 1.30
how to flash faster with dream up?
First I´ve tried with "network" that should be faster, but something is wrong,
it shows only calculating checksum and nothing happens....
someone can tells me what is wrong ?
[Blockierte Grafik: http://img110.imageshack.us/img110/8596/dreamupa0ju.th.jpg]
So I tried the "slow" way, it gets about 35 minutes but works
[Blockierte Grafik: http://img45.imageshack.us/img45/4959/dreamupb2jw.th.jpg]
There´s a trick to use network? thak folkz !
ZitatOriginally posted by Olove
Nein, wir ziehen an einem Strang
Olove
English rules are here:
Forum Rules in English
Ok, folks, happy to say to all: there´s an auto script that make everything works in the image I´m using, but I dont know if is exactly the same in all images !
I used gparted in a linux machine and format the disk with ext3,
so I plugged it again in the dreambox, so, How can I mopunt it?
I need to modify something in the fstab file?
Can I do automount?
Tkz palZ
Please provide some information about the hard- and software used.
Box type: 7025
GUI (enigma1/enigma2):Gemini Project 2 / 0.9 - enigma2 ?
Firmware version: ???
1. I bought a 200gb hdd, so I would like to use it in USB mode, is it possible? or should I necessary have a hdd inside DB ?
2. I must format it in linux mode? set it to some linux kind of partition, or I can format it in NTFS and use it ok?
Tkz PalZ !
Please provide some information about the hard- and software used.
Box type: 7025
GUI: Gemini Project 2
Firmware version:
Released !
Flash Wizard 6.3 (Link edited)
I´m a lil nooba but I think we can share these nice urls and info !
Tks all
Excuse us, but at this site several emu-images are provided and so we have to delete the link due to legal restrictions.
Users who search for Flashwizard will find it easy via google
Regards, the Board Team
Great man !
this community is realy the better one
tka again
tkz pal ! good to know I´ve try it using ftp !
tkz !
I setted 1 ehternet to 192.168.0.1 and DB to 192.168.024
I can ping both, but when I try to telnet the db, it says that can´t resolve the host, so I cant do nothing !
any idea ?
tkz all
