Hi.

We have a DM7025 with 200gig Hard Drive, irdeto CI module and subscription card. We have a Dual LNBF working on Optus C1

We can get the service to decrypt on Sat Tuner A but the same service will not Decrypt on Sat Tuner B. Tuner B is working but comes up "Service Scrambled" even though it is the same service as on Sat Tuner A. We want to be able to record a channel and watching another one, it can not be done.

The latest update still does not address the C Band issue completely, you can setup Tuner A as KU Band and Tuner B as C Band, put it in Auto scan and it will scan Tuner A, but nottuner B. You can scan Tuner B if you go into Manual scan and select "Satellite scan" and it will scan the complet satellite.

BUT AUTO SCAN DOES NOIT WORK.

An then we have the DISEQ Moter setup,

Why cant you have the same simple setup option as you have in the DM7000/20 where you can manually move the motor rather then have a complex sat position configuration menu, dont make it any harder then it allready is?

If you set Tuner A to C Band and Tuner B to Universal, You can manualy scan satellites or transponders on both Tuner A and B, but you can not get it to Autoscan, it just finds Tuner A services not Tuner B.

If you swap and set Tuner B to C band and Tuner A to Universal, you can not scan anything on Tuner A but Tuner B works on C Band.

YOU MUST remeber to check Tuner A and B that both Simple and Advanced satellite setting have the same satellites otherwiase you can not scan and you get the wrong satellite showing in the menu.

It also looks as though LNB1 is the only settings that work, although if you set the LNB to "Not Available" it still works as univrsal.

The latest Boxman image tries to address it I think but unsuccesffully.

You now go to the LNB C band or user option and set it for 5150 and it now changes something because doing the above reverse setting no longer works, BUT STILL DOES NOT WORK.

KEEP TRYING.

I have the same problem, I can not get C Band to work on the DM7025 with the C Band LNB setup, either under C Band or universal setup.

You can trick the DM7025 to tune C band by getting your calculator out and first placing 5150 minus the desired transponder eg 3800 which = 1350 then add this to the 9750 LNBF =11100 input this in the manual transponder setting and all the Symbol rate Pol and FEC then scan, the required C Band signal will then load.

You can do this with the DM7020 LNB settings in Universal or C Band or user config, so thhis proves that these setting have NO EFFECT, they are all the same.

Get your act together Dream, we in the rest of the world do not just use Universal settings, there are alternatives, you finally got 11300 LNB IF to work after much complaining, A lot of people around the world have C band or unique LNB satellite setups.

I am an offical Australian DM7025 beta tester.