Hello,
I'm disapointed that there are no answers for this problem.
In the meantime I've downloaded an image from a Dutch guy called milo and installed his netcaster plugin.
In the info of netcaster it says it has been patched and yes !!! the mid stream is now giving sound on the dreambox.
So I hope this patch will become standard in the plugin.
Thanks
Beiträge von Rodajo
-
-
Hello,
Where i live the connection speed of the internet is not far as good as in Europe.
I'm used to listen to internetradio from Belgium on my PC.
They have 3 different streams for each radio, for example :- http://mp3.streampower.be/radio1-low.mp3
- http://mp3.streampower.be/radio1-mid.mp3
- http://mp3.streampower.be/radio1-high.mp3
The low stream equals 16 kbps/sec, the mid 32kbps/sec and the high one 96 kbps/sec
On the PC i can listen to the three streams, but the high one is to fast for my internet, it gives many breaks. The mid stream is just fine.
On the Dreambox there is internetactivity when connecting to the low and mid stream, but there is no sound.
The high stream gives sound, but is to fast to make continuos listening possible.What is the lowest rate the netcaster can use ?
Is it possible to configure this rate ?Thanks
-
Hello,
This is a know bug with the keyboard.
Is your keyboard still working with the latest state of the cvs ?
I have OoZoon from 8 september in the box and my keyboard is not working. But i think it's a problem with the keyboard itself.
Thanks -
Hello,
Very nice side effect with this new driver is that the problems i had to recieve channels with a low symbolrate is now away.
When tuning to those channels I have instantly image on those channels.
Nice work !! -
Finally i found a solution for my problem.
The bug is that when Inversion is set to auto, the tuner is switching from inversion on to inversion off and vice verca, so the signal doesn't come to a lock.
I delete from the setting list all those channels and rescan them manually with inversion set to off.
In the channel info inversion now appears as off and when switching to that channel the light comes on.So i think the state off the inversion should be set when the scan occurs and not left to auto.
-
It's fixed, thanks
-
Hello,
With the latest cvs the dmm keyboard is not longer working for input.
Tested with Oozoon 17-02-2008.
Thanks -
Hello,
Two more months has past since the last post, but the problem is still there.
It's very strange that a lock is obtain in satfinder but the box is not able to tune to that channel, even after waiting a longer time (2 or 3 min)
I see that on all those problems channels the AGC is 99 %, maybe there is some relation to it ?
Thanks -
I agree with qwertyuiop for the epg request.
So we are at least 3 -
Hello,
Thanks a lot for the work on the keyboard.
Just a little remark, when using the keyboard to fill in the data for the timers the "5" doesn't work.
Thanks -
Well, i got it first working in that "fremdimage" and now it's also working in the Oozoon, so big thanks to them who fixed it.
-
Well, in the newest [Moderator] Fremdimage, verstößt gegen die Boardregeln [/Moderator]the keyboard works for text input.
Hope it will be soon in cvs. -
The board software allows only 5 pictures.
Here are the other ones on W3A -
Hello,
I made some screenshots with the latest Oozoon in the box.
I used two different sats, NSS7 and W3.
You can see that there is a lock, channel is scaned but no picture.
As control there are two pictures of what the nokia gives on those freq.The channels are FTA.My tunerconfiguration is simple with A NSS7, B Sesat 36, C W3A, D NSS7 Cband.
The LnB's are Invacom C120 quad on prime focus dish from 1m80.
The discqec switches are Maximus 1.0
There is about 20 m cable for each dish to the recieverI don't think the problem is at my side, but in the drivers.
At least tell me if you are able to reproduce or not this problem.
Thanks
-
Hello,
Usually i have the latest CVS from Oozoon in the box. I had to switch to this image to make the screenshots.
But problem is still there.
Anyway, could you confirm what is the lowest symbolrate that you can catch in Europe.
Thanks a lot. -
Hello,
Tree months past since i started this post and there is no reaction on it.
Must i believe to be the only one to have this problem ?
Or is it not enigma2 related ?Anyway, i made some screenshots wich clearly show what's wrong.
I used the transponder 11648 H 5926 SR 3/4 Fec on the NSS7 sat, south africa beam.
1 : TunesatFinder.jpg is the shot after satfinders stabilize on the transponder.
2 : Scan_Channels.jpg is shot of the manual scan on this transponder.
3 : Scan_Channels_done.jpg is shot of screen that appears after scan. First it says no channels found and after 2 sec it change to this one.
4 : Tune_to_channel.jpg is shot when i tune to this TPA channel. The image is the one of the previous service so the indication of the Frequency, which change after succesfull tune. You see clearly that the SNR stays low and the BER is high. During the time the infobar is on the screen the SNR moves to higher values and than goes back to the low.I really hope there will be an answer and better an solution for this problem.
-
Hello,
My dmm keyboard has only limited functionality, the keys similair to those on the remote works, all the others don't.
When will the keyboard be fully supported ?Thanks
-
-
I completly agree with you, have same problem on NSS7, Canalsat Horizon.
-
After a second look there is a lot untranslated. The older version had a lot more correct items.
If you have trouble with it, send me the english file, i will translate what i can.