thank you for your effort

I found that the (Apple USB Ethernet Adapter A1277) working like charm after I had install

kernel-module-asix as well as well as kernel-module-usbnet

with following steps

I install drivers on flash usb then connect it to dreambox

mount the usb flash with

mount /dev/sda1 /mnt
cp kernel-module-usbnet_3.4-r1.13_mipsel.deb /tmp/

cp kernel-module-asix_3.4-r1.13_mipsel.deb /tmp/

cd /tmp

dpkg -i kernel-module-usbnet_3.4-r1.13_mipsel.deb

dpkg -i kernel-module-asix_3.4-r1.13_mipsel.deb

Zitat von Fred Bogus Trumper

I had the the same issue yesterday: no network after reboot, no blinking LED on the NIC, no network interfaces in the network settings.

After changing the network cable and some failed attempts to start the network via serial connection I thougt the box is defective. So I checked if the box will receive an IP via DHCP in the rescue mode. The 1st attempt has failed, but on the 2nd one the box received an IP. After the reboot the NIC and (static) IP was also back in normal boot mode.

So please try for serveral times if the box will receive an IP on bootup to the rescue mode.

thank you .
unfortly I've try several times with no successful ..Ethernet port i guess it's dead.. for time been I'm using USB Wi-Fi Adapter (Tenda) is compatible with it .. but looking for USB Ethernet Adapter ..that compatible with it
or fix the Ethernet

so any one could please help me

thanks

Hello ...
My Dreambox DM 820HD network interface stop working Suddenly ,,, I've tried all possibilities to bring it up with no successful...

I'm able to login through USB serial terminal using putty. with Rescue Mode but also without IP I can run commands easily
and through terminal I try to bringup the network up. got error

ifconfig eth0 down


ifconfig eth0 up






[993.178000] ADDRCONF(NETDEV_UP): eth0: link is not ready

even if I add static IP not able to have network.
------
I've add the rescue bin files on USB flash and mount it and copy the files to /tmp
then run it on rescue mode

flash-rescue vmlinux.gz-rescue-3.4-r1-dm820-20181017.bin

and give result successful but sill network not up
-------------

I've read some thread that to go to CFE by Pressing Ctrl-C , with rescue mode but box always starts to the end. not able to catch CFE>

my request how to go with CFE with proper way

I've upload the output from Putty contains boot startputty.txt

There is some things to help me?

Hello ...
My Dreambox DM 820HD Suddenly the network interface stop working anymore ,,, I've tried all possibilities to bring it up with no successful... using deferent router,cable / enable/disable DHCP use static IP.... even in Rescue Mode show in screen, No IP showing, Can't access from browser to dreambox and I've used USB mini cable with DreamUP_1_3_3_12 All that don't solve problem, no option to flash.. I can't do any things with it

Note: I'm able to login through USB serial terminal using putty. in Rescue Mode I can run commands easily and also from terminal I try to bringup the network up but still not working.

I've upload the output from Putty contains boot start , dmesg ifconfig lsmod lspci etc dm.txt

There is some things to help me?