====================================================
Elektro Power Save for Dreambox 7025
Version 2.0 by gutemine from 31.12.2006
!!!!! Happy New Year !!!!
====================================================
Release infos
====================================================
1.0 first version, as usually completely
untested - have Fun !
1.1 now after boot the Dreambox will go
immediately to normal Standby
1.2 some bugfixes on Plugin Text and
make standby on boot configurable
2.0 make ipk kit, add info messages before standby
and prevent deepstandby if timer is running
====================================================
The Englis Documentation is below the German one
====================================================
1) Voraussetzung
----------------
Jedes Image sollte funktioniere, aber bitte beachten
das die DreamboxHardware.py ersetzt wird.
Seit Euch bewusst das dies Probleme verursachen
könnte. Die originale DreamboxHardware.py wird
jetzt aber gesichert, ein ipkg remove sollte
also den Originalzustand wieder herstellen.
Power Save sollte mit dem Slep Timer kompatibel
sein, muss aber nicht sein !
2) Installation
---------------
Zuerst kopiert das elektro*.ipk File vom
elektro*.zip auf /tmp mit ftp (TCP/IP muss
natürlich schon funktionieren).
Wenn Ihr ein Image geflashed habt, das ein Blue
Pannel hat könnt Ihr damit mit Manual Install das
ipk file installieren.
Wenn nicht, dann installiert elektro mit folgenden
Kommandos im Telnet:
cd /
ipkg install /tmp/elektro*.ipk
Beim ipk install wird enigma auch gleich
restarted, um das Elektro Plugin bei den
Spielen/Erweiterungen angezeigt zu bekommen.
Wenn es dort nicht auftaucht,
probieren sie einen manuellen Reboot.
3) Usage
--------
Im Erweiteurngs Menu kann man die Einschlafzeit
einstellen zu der die Box in den Deepstandby
gehen soll und die Zeit zu der Sie wieder
aufwachen soll.
Im Moment sind nur volle Stunden dafür
unterstützt und die vorgeschlagenen
Standardwerte sind 23h
für den Deepstandby und 7h für
die Aufwachzeit.
Bitte beachten das wenn Ihr im Elektro Plugin
das Standby beim Booten Feature aufdreht,
dass nach dem Booten die Box in Standby geht
- kurzes Drücken des Power Knopfes auf
der Fernbedienung 2x bringt die Box dann erst
komplett online.
Das Elektro Power save plugin sollte in der
Lage sein die Box sauber aufzuwecken wenn
eine Aufnahme in der Schlafenszeit eingeplant
wurde (das ist der Grund warum die
DreamboxHardware.py gepatched wurde).
Wenn Ihr Aufnahmen während der Schlafenszeit
einplant, dann vergesst nicht diese mit
Standby nach der Aufnahme einzuplanen,
ansonsten wird die Dreambox online bleiben.
Wenn eine Aufnahme läuft während die
Schlafenszeit kommt, wird das Elektro
Plugin die Box nur in normales Standby
schicken um die Aufnahme nicht zu stören.
Nachdem diese Aufnahme beendet wurde, wird
kein verspäteter Deepstandby stattfinden,
ausser diese Aufnahme wurde mit Deepstandby
nach dem Beenden eingeplant.
====================================================
Viel Spass mit dem Stromsparen und Umweltschützen
mit dem Elektro Plugin auf der Dreambox 7025 !!!!
====================================================
1) Prerequisites
----------------
Any Image should work, but the DreamboxHardware.py
is replaced, so be aware that this could cause
Troubles !
But original DreamboxHardware.py is now saved,
so ipkg remove will bring back the original state.
Power Save should be compatible to the Sleeptimers
available, but don't take this for sure !
2) Installation
---------------
First copy the elektro*.ipk file from elektro*.zip
to /tmp with ftp (TCP/IP must be working already).
If you have flashed an image that offer in Blue
Pannel Manual Addon Install you can use this
functionality to install the ipk file.
If not, then install Elektro by entering the
following commands in a Telnet session:
cd /
ipkg install /tmp/elektro*.ipk
The ipkg install will also restart enigma for
you to get the Elektro Plugin shown in addons
menu. If it doesn't show up try to reboot
manually.
3) Usage
--------
In the addons menu of Elektro you can specifiy
the Time at which the box should go into
Deepstandby and the time when it should wakeup.
Currently only full hours are supported and the
default suggested time is 23h for Deepstandby
and 7h for wakeup.
Be aware that if you enable the Standby on
boot feature with Elektro, that after
wakeup/boot the box will go to Standby
- short Press of the Power Button 2x will
get it fully awake.
The Elektro Power save should be able to
handle that the box awakes properly if there
is a timer planned during the Power Save Time
(this is the reason why DreamboxHardware.py
is patched).
When you plan Timers during the Powersave
time don't forget to plan them with Standby
after Recording, or Dreambox will stay online.
If there is a timers/recording running when
Sleeptime occures the Elektro Plugin will do
a normal Standby instead of Deepstandby
to prevent harming the recording.
After this recording is finished NO delayed
Deepstandby will occure, unless you have
planned your timer with Deepstandby when
finished.
======================================================
Have Fun to let Elektro Save Power and the
Environment with your Dreambox 7025 !!!!
======================================================