Box type: DM-7020
GUI (enigma1/enigma2): enigma1
Firmware version: Factory V1.00

When I boot the box, it waits at the dhcp... screen for close to 2 minutes before starting the image boot up process. Is this normal? Do all 7020's take this long before going into the final boot process?

I have my box connected to a linksys router with static IP allocation for the box, both in the router and in the box..
I am kinda surprised that it would take this long to boot when compared to a 7000 (I have been using a 7000 till now...)

Any suggestions and comments would be very helpful

I connected through Hyperterminal and here is the response:

Dreambox DM7020
FIRST STAGE 1.3 {2345}
2ND STAGE OK, build #35 (20050921)

0.000 - fp init
0.042 - ca init
0.106 - load config
0.398 - config loaded.
* press [S] to enter setup
no CF card detected!
- total memory size: 96 MB (64 MB in first bank)
detected jffs2 blocksize: 16kb
++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++
Scanning JFFS2 FS: . done.

loaded at: 00400000 00577244
board data at: 00575124 00575244
relocated to: 00405194 004052B4
zimage at: 00405A2D 005745CE
avail ram: 00578000 04000000

Linux/PPC load: console=null root=/dev/mtdblock3 rootfstype=jffs2 rw
Uncompressing Linux...done.
Now booting the kernel

What could be the reason for the delay?