=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2015.01.31 12:29:42 =~=~=~=~=~=~=~=~=~=~=~= Dreambox DM7 080 M0 M1 SHMOO 0 00000000 1 00000000 C do_boot . load 2nd stage SL2=1 LLMB=0000C000 BP=02000000 L2Cfg=1E76C637 L2Buf=44707700 BrCfg=F01C204F BrMod=02800001 BrZp0=05000000 BrZp1=00002000 #@ BCM97434B0 CFE v3.15, Endian Mode: Little Build Date: 20140202 (dm@dm) Copyright (C) Broadcom Corporation. Initializing eMMC (v0.9). 2013.03.21 : 1 ---> device is Sector mode eMMC (1th scan) GenCmd6Timeout 250 [eMMC Partition Information] : ReadBlkLen(512B) Partition : Physical, Logical - Data : 003776MB, 003776MB, Physical_SectorCount(7733248, 0x00760000)! - ENH Data: 000000MB, Address(0x000000000000)! - Boot1 : 000002MB, 000640KB + 256KB for BSEK reload! - Boot2 : 000002MB, 000640KB + 256KB for BSEK reload! fp: init done MACRONIX SPI flash detected: Size = 16MB, Sector Size 4096, Page Size 256 found card in unknown state ca valid! CPU speed: 1407MHz DDR Frequency: 667 MHz DDR Mode: DDR3 Total memory(MEMC 0): 1024MB MEMC 0 DDR Width: 32 Total memory(MEMC 1): 1024MB MEMC 1 DDR Width: 32 Initializing USB. USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub DM init finalization yxml: processing file of 131072 bytes... succeeded! loaded network params of: Static, 192.168.10.30, 255.255.255.0, 192.168.10.222 [1] type 1, dev eth0, loader elf, filesys tftp, file 192.168.223.199:/vmlinuz, options root=/dev/nfs rw nfsroot=192.168.223.199:/nfsroot/dm7080hd bmem=512M@512M ip=192.168.223.189 5 [2] type 2, dev emmcflash0.fastbt0, loader elf, filesys raw, file , options [3] type 2, dev emmcflash0.fastbt1, loader elf, filesys raw, file , options added 3 sources to autoboot list CFE initialized. Starting splash screen. No valid image found in flash0.splash - disabling splash ***** DREAMBOX SSBL ***** Not interrupted yet, trying autoboot, hit any key in the next 500ms to cancel Proceeding with autoboot.. You can try aborting with Ctrl+C *** Autoboot: Trying device 'eth0' file 192.168.223.199:/vmlinuz (eth0,tftp) 100 Mbps Full-Duplex DHCP done Device eth0: hwaddr 00-09-34-2F-16-8F, ipaddr 192.168.10.30, mask 255.255.255.0 gateway 192.168.10.222, nameserver 192.168.10.222, domain fritz.box Loader:elf Filesys:tftp Dev:eth0 File:192.168.223.199:/vmlinuz Options:root=/dev/nfs rw nfsroot=192.168.223.199:/nfsroot/dm7080hd bmem=512M@512M ip=192.168.223.189 5 Loading: Failed. *** Autoboot: Trying device 'emmcflash0.fastbt0' file (emmcflash0.fastbt0,raw) Loader:elf Filesys:raw Dev:emmcflash0.fastbt0 File: Options: Loading: Failed. *** Autoboot: Trying device 'emmcflash0.fastbt1' file (emmcflash0.fastbt1,raw) Loader:elf Filesys:raw Dev:emmcflash0.fastbt1 File: Options: Loading: Failed. *** Autoboot failed/stopped. Autoboot cancelled, starting config utility Initializing the network, this may take a few seconds.. 100 Mbps Full-Duplex network is up, set ip Static IP: 192.168.10.30, Mask: 255.255.255.0, Gateway: 192.168.10.222 c Dreambox ADVANCED SETUP UTILITY Information Network Boot Exit旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴커��������������������������������������읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸InformationProductDM7080Bootloader VersionBuild #0.0.1Board revision1Serial NumberEA1619110011936MAC Address00:09:34:2f:16:8fProduction Date2014-10-16 Information Network Boot Exit旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴커��������������������������������������읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸Network SettingsNetwork Typemanual [192.168. 10. 30]IP Address[255.255.255. 0]Subnet Mask[192.168. 10.222]Default GatewaySpeedauto Activate SettingsLinkOK Mode100 FullRestart Network Dreambox DM7 080 M0 M1 SHMOO 0 00000000 1 00000000 C do_boot . go .. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4-3.0-dm7080 (weazle@digger.merlin.xyz) (gcc version 4.8.1 (GCC) ) #6 SMP Tue Jan 20 17:19:24 CET 2015 [ 0.000000] Fetching vars from bootloader... none present, using defaults. [ 0.000000] Options: moca=0 sata=1 pcie=1 usb=1 [ 0.000000] Using 1024 MB + 1024 MB RAM (from CFE) [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU revision is: 00025b00 (Broadcom BMIPS5000) [ 0.000000] FPU revision is: 00130001 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 10000000 @ 00000000 (usable) [ 0.000000] memory: 30000000 @ 20000000 (usable) [ 0.000000] memory: 30000000 @ 90000000 (usable) [ 0.000000] bmem: adding 384 MB RESERVED region at 640 MB (0x18000000@0x28000000) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone PFN ranges: [ 0.000000] Normal 0x00000000 -> 0x00050000 [ 0.000000] HighMem 0x00050000 -> 0x000c0000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00010000 [ 0.000000] 0: 0x00020000 -> 0x00050000 [ 0.000000] 0: 0x00090000 -> 0x000c0000 [ 0.000000] PERCPU: Embedded 7 pages/cpu @81e12000 s6784 r8192 d13696 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 452608 [ 0.000000] Kernel command line: bmem=384M@640M memc1=768M console=ttyS0,1000000 root=/dev/mmcblk0p1 rootwait rootfstype=ext4 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes. [ 0.000000] Primary data cache 32kB, 4-way, linesize 32 bytes. [ 0.000000] MIPS secondary cache 512kB, 8-way, linesize 128 bytes. [ 0.000000] Memory: 1419004k/1048576k available (5722k kernel code, 416004k reserved, 1196k data, 256k init, 786432k highmem) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] NR_IRQS:160 [ 0.000000] Measuring MIPS counter frequency... [ 0.000000] Detected MIPS clock frequency: 1407 MHz (175.901 MHz counter) [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] Calibrating delay loop... 935.93 BogoMIPS (lpj=467968) [ 0.010000] pid_max: default: 32768 minimum: 301 [ 0.010000] Mount-cache hash table entries: 512 [ 0.011000] Initializing cgroup subsys cpuacct [ 0.012000] Initializing cgroup subsys devices [ 0.012000] Initializing cgroup subsys freezer [ 0.013000] SMP: Booting CPU1... [ 0.014000] CPU revision is: 00025b00 (Broadcom BMIPS5000) [ 0.014000] FPU revision is: 00130001 [ 0.014000] Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes. [ 0.014000] Primary data cache 32kB, 4-way, linesize 32 bytes. [ 0.014000] MIPS secondary cache 512kB, 8-way, linesize 128 bytes. [ 0.024000] SMP: CPU1 is running [ 0.024000] SMP: Booting CPU2... [ 0.024000] CPU revision is: 00025b00 (Broadcom BMIPS5000) [ 0.024000] FPU revision is: 00130001 [ 0.024000] Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes. [ 0.024000] Primary data cache 32kB, 4-way, linesize 32 bytes. [ 0.024000] MIPS secondary cache 512kB, 8-way, linesize 128 bytes. [ 0.034000] SMP: CPU2 is running [ 0.034000] SMP: Booting CPU3... [ 0.034000] CPU revision is: 00025b00 (Broadcom BMIPS5000) [ 0.034000] FPU revision is: 00130001 [ 0.034000] Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes. [ 0.034000] Primary data cache 32kB, 4-way, linesize 32 bytes. [ 0.034000] MIPS secondary cache 512kB, 8-way, linesize 128 bytes. [ 0.043000] SMP: CPU3 is running [ 0.043000] Brought up 4 CPUs [ 0.043000] devtmpfs: initialized [ 0.046000] bmem: adding extra 256 MB RESERVED region at 3072 MB (0x10000000@0xc0000000) [ 0.047000] NET: Registered protocol family 16 [ 0.048000] USB0: power enable is active high; overcurrent is active low [ 0.048000] USB1: power enable is active high; overcurrent is active low [ 0.049000] PCI: PCIe link up, 5.0Gbps x1 [ 0.052000] bio: create slab at 0 [ 0.053000] SCSI subsystem initialized [ 0.054000] usbcore: registered new interface driver usbfs [ 0.054000] usbcore: registered new interface driver hub [ 0.055000] usbcore: registered new device driver usb [ 0.055000] Advanced Linux Sound Architecture Driver Version 1.0.25. [ 0.056000] PCI host bridge to bus 0000:00 [ 0.056000] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff] [ 0.057000] pci_bus 0000:00: root bus resource [mem 0x00000400-0x000007ff] [ 0.057000] PCI: found device 104c:8241 on PCIe bus, slot 0 (irq 36) [ 0.058000] pci 0000:00:00.0: BAR 0: assigned [mem 0xd0000000-0xd000ffff 64bit] [ 0.059000] pci 0000:00:00.0: BAR 2: assigned [mem 0xd0010000-0xd0011fff 64bit] [ 0.060000] Bluetooth: Core ver 2.16 [ 0.060000] NET: Registered protocol family 31 [ 0.060000] Bluetooth: HCI device and connection manager initialized [ 0.061000] Bluetooth: HCI socket layer initialized [ 0.061000] Bluetooth: L2CAP socket layer initialized [ 0.062000] Bluetooth: SCO socket layer initialized [ 0.062000] cfg80211: Calling CRDA to update world regulatory domain [ 0.063000] Switching to clocksource wktmr [ 0.071000] NET: Registered protocol family 2 [ 0.079000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.080000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.084000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.086000] TCP: Hash tables configured (established 131072 bind 65536) [ 0.086000] TCP: reno registered [ 0.087000] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.088000] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.089000] NET: Registered protocol family 1 [ 0.089000] RPC: Registered named UNIX socket transport module. [ 0.090000] RPC: Registered udp transport module. [ 0.091000] RPC: Registered tcp transport module. [ 0.091000] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.092000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002) [ 0.094000] highmem bounce pool size: 64 pages [ 0.095000] NFS: Registering the id_resolver key type [ 0.096000] SGI XFS with security attributes, large block/inode numbers, no debug enabled [ 0.097000] msgmni has been set to 1235 [ 0.099000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.100000] io scheduler noop registered [ 0.100000] io scheduler cfq registered (default) [ 0.101000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.102000] serial8250.0: ttyS0 at MMIO 0x10406b00 (irq = 67) is a 16550A [ 0.103000] console [ttyS0] enabled, bootconsole disabled [ 0.103000] console [ttyS0] enabled, bootconsole disabled [ 0.105000] loop: module loaded [ 0.106000] ahci: SSS flag set, parallel bus scan disabled [ 0.117000] ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 0.118000] ahci strict-ahci.0: flags: ncq sntf stag clo slum part [ 0.122000] scsi0 : ahci_platform [ 0.123000] scsi1 : ahci_platform [ 0.124000] ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 46 [ 0.124000] ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 46 [ 0.126000] tun: Universal TUN/TAP device driver, 1.6 [ 0.126000] tun: (C) 1999-2004 Max Krasnyansky [ 0.420000] Found PHY at Address 3 [ 0.420000] bcmgenet: configuring instance #0 for external RGMII [ 0.421000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.422000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI [ 0.422000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1 [ 0.431000] ata1: SATA link down (SStatus 0 SControl 300) [ 0.455000] ehci-brcm ehci-brcm.0: irq 71, io mem 0x10480300 [ 0.461000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00 [ 0.462000] hub 1-0:1.0: USB hub found [ 0.462000] hub 1-0:1.0: 1 port detected [ 0.463000] ehci-brcm ehci-brcm.1: Broadcom STB EHCI [ 0.463000] ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2 [ 0.495000] ehci-brcm ehci-brcm.1: irq 72, io mem 0x10480500 [ 0.501000] ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00 [ 0.501000] hub 2-0:1.0: USB hub found [ 0.502000] hub 2-0:1.0: 1 port detected [ 0.503000] ehci-brcm ehci-brcm.2: Broadcom STB EHCI [ 0.503000] ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3 [ 0.535000] ehci-brcm ehci-brcm.2: irq 76, io mem 0x10490300 [ 0.541000] ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00 [ 0.541000] hub 3-0:1.0: USB hub found [ 0.542000] hub 3-0:1.0: 1 port detected [ 0.543000] ehci-brcm ehci-brcm.3: Broadcom STB EHCI [ 0.543000] ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4 [ 0.575000] ehci-brcm ehci-brcm.3: irq 77, io mem 0x10490500 [ 0.581000] ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00 [ 0.581000] hub 4-0:1.0: USB hub found [ 0.582000] hub 4-0:1.0: 1 port detected [ 0.583000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.583000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI [ 0.584000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5 [ 0.585000] ohci-brcm ohci-brcm.0: irq 73, io mem 0x10480400 [ 0.651000] hub 5-0:1.0: USB hub found [ 0.651000] hub 5-0:1.0: 1 port detected [ 0.652000] ohci-brcm ohci-brcm.1: Broadcom STB OHCI [ 0.653000] ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6 [ 0.653000] ohci-brcm ohci-brcm.1: irq 74, io mem 0x10480600 [ 0.719000] hub 6-0:1.0: USB hub found [ 0.719000] hub 6-0:1.0: 1 port detected [ 0.720000] ohci-brcm ohci-brcm.2: Broadcom STB OHCI [ 0.721000] ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7 [ 0.721000] ohci-brcm ohci-brcm.2: irq 78, io mem 0x10490400 [ 0.787000] hub 7-0:1.0: USB hub found [ 0.787000] hub 7-0:1.0: 1 port detected [ 0.788000] ohci-brcm ohci-brcm.3: Broadcom STB OHCI [ 0.789000] ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8 [ 0.789000] ohci-brcm ohci-brcm.3: irq 79, io mem 0x10490600 [ 0.855000] hub 8-0:1.0: USB hub found [ 0.855000] hub 8-0:1.0: 1 port detected [ 0.856000] xhci_hcd 0000:00:00.0: xHCI Host Controller [ 0.857000] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 9 [ 0.858000] xhci switched power on polarity [ 0.859000] hub 9-0:1.0: USB hub found [ 0.859000] hub 9-0:1.0: 2 ports detected [ 0.860000] xhci_hcd 0000:00:00.0: xHCI Host Controller [ 0.860000] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 10 [ 0.861000] hub 10-0:1.0: USB hub found [ 0.862000] hub 10-0:1.0: 2 ports detected [ 0.863000] Initializing USB Mass Storage driver... [ 0.863000] usbcore: registered new interface driver usb-storage [ 0.864000] USB Mass Storage support registered. [ 0.864000] i2c /dev entries driver [ 0.865000] lirc_dev: IR Remote Control driver registered, major 253 [ 0.866000] usbcore: registered new interface driver btusb [ 0.866000] sdhci: Secure Digital Host Controller Interface driver [ 0.867000] sdhci: Copyright(c) Pierre Ossman [ 0.868000] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.868000] sdhci-brcmstb sdhci-brcmstb.0: Enabling controller [ 0.874000] mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using ADMA [ 0.874000] sdhci-brcmstb sdhci-brcmstb.1: Enabling controller [ 0.880000] mmc1: SDHCI controller on sdhci-brcmstb.1 [sdhci-brcmstb.1] using ADMA [ 0.881000] TCP: cubic registered [ 0.881000] NET: Registered protocol family 10 [ 0.883000] NET: Registered protocol family 17 [ 0.883000] Bluetooth: RFCOMM TTY layer initialized [ 0.884000] Bluetooth: RFCOMM socket layer initialized [ 0.884000] Bluetooth: RFCOMM ver 1.11 [ 0.885000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 0.885000] Bluetooth: BNEP filters: protocol multicast [ 0.886000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 0.887000] L2TP core driver, V2.0 [ 0.887000] Registering the dns_resolver key type [ 0.888000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor [ 0.889000] EBI CS0: setting up SPI flash (primary) [ 0.890000] spi_brcmstb spi_brcmstb.0: master is unqueued, this is deprecated [ 0.891000] spi_brcmstb spi_brcmstb.0: 1-lane output, 3-byte address [ 0.892000] m25p80 spi0.0: mx25l12805d (16384 Kbytes) [ 0.893000] Creating 3 MTD partitions on "spi0.0": [ 0.893000] 0x000000000000-0x000001000000 : "entire_device" [ 0.895000] 0x000000000000-0x000000100000 : "bootloader" [ 0.896000] 0x000000100000-0x000001000000 : "recovery" [ 0.897000] ALSA device list: [ 0.897000] No soundcards found. [ 0.898000] Waiting for root device /dev/mmcblk0p1... [ 0.983000] mmc0: new high speed MMC card at address 0001 [ 0.984000] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 0.985000] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 0.986000] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 0.992000] mmcblk0: p1 p2 [ 0.993000] mmcblk0boot1: unknown partition table [ 0.995000] mmcblk0boot0: unknown partition table [ 1.138000] EXT4-fs (mmcblk0p1): recovery complete [ 1.140000] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.141000] VFS: Mounted root (ext4 filesystem) on device 179:1. [ 1.142000] devtmpfs: mounted [ 1.380000] systemd[1]: systemd 206 running in system mode. (-PAM +LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP -GCRYPT +ACL +XZ) Welcome to Linux! [ 1.385000] systemd[1]: Set hostname to . [ 1.523000] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details. [ 1.525000] systemd[1]: Cannot add dependency job for unit showiframe-backdrop.service, ignoring: Unit showiframe-backdrop.service failed to load: No such file or directory. See system logs and 'systemctl status showiframe-backdrop.service' for details. [ 1.529000] systemd[1]: Starting Generate environment for enigma2... Starting Generate environment for enigma2... [ 1.541000] systemd[1]: Expecting device dev-ttyS0.device... Expecting device dev-ttyS0.device... [ 1.544000] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 1.545000] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 1.546000] systemd[1]: Expecting device dev-tpm0.device... Expecting device dev-tpm0.device... [ 1.549000] systemd[1]: Starting Delayed Shutdown Socket. [ OK ] Listening on Delayed Shutdown Socket. [ 1.552000] systemd[1]: Listening on Delayed Shutdown Socket. [ 1.552000] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 1.556000] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 1.557000] systemd[1]: Starting Root Slice. [ OK ] Created slice Root Slice. [ 1.560000] systemd[1]: Created slice Root Slice. [ 1.560000] systemd[1]: Starting User and Session Slice. [ OK ] Created slice User and Session Slice. [ 1.564000] systemd[1]: Created slice User and Session Slice. [ 1.564000] systemd[1]: Starting System Slice. [ OK ] Created slice System Slice. [ 1.568000] systemd[1]: Created slice System Slice. [ 1.568000] systemd[1]: Starting Slices. [ OK ] Reached target Slices. [ 1.571000] systemd[1]: Reached target Slices. [ 1.571000] systemd[1]: Starting system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 1.575000] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 1.575000] systemd[1]: Starting system-getty.slice. [ OK ] Created slice system-getty.slice. [ 1.579000] systemd[1]: Created slice system-getty.slice. [ 1.580000] systemd[1]: Starting udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 1.583000] systemd[1]: Listening on udev Kernel Socket. [ 1.584000] systemd[1]: Starting udev Control Socket. [ OK ] Listening on udev Control Socket. [ 1.587000] systemd[1]: Listening on udev Control Socket. [ 1.587000] systemd[1]: Starting Journal Socket. [ OK ] Listening on Journal Socket. [ 1.591000] systemd[1]: Listening on Journal Socket. [ 1.591000] systemd[1]: Mounted Huge Pages File System. [ 1.593000] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required static device nodes...rrent kernel... [ 1.608000] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... [ 1.620000] systemd[1]: Starting udev Coldplug all Devices... Starting udev Coldplug all Devices... [ 1.643000] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 1.657000] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 1.669000] systemd[1]: Starting Journal Service... Starting Journal Service... [ OK ] Started Journal Service. [ 1.685000] systemd[1]: Started Journal Service. [ 1.685000] systemd[1]: Mounted Debug File System. [ 1.686000] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. [ 1.688000] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 1.689000] systemd[1]: Starting Paths. [ OK ] Reached target Paths. [ 1.692000] systemd[1]: Reached target Paths. [ 1.692000] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 1.697000] systemd[1]: Started Set Up Additional Binary Formats. [ 1.697000] systemd[1]: Starting Swap. [ OK ] Reached target Swap. [ 1.700000] systemd[1]: Reached target Swap. [ 1.701000] systemd[1]: Started File System Check on Root Device. [ 1.701000] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 1.711000] systemd[1]: Expecting device dev-disk-by\x2duuid-d2cfe9eb\x2d95f3\x2d4c13\x2d80ca\x2d9cf2cc013622.device... Expecting device dev-disk-by\x2duuid-d2cfe9eb\x2d95f...13622.device... [ 1.724000] stb_core: module license 'Proprietary' taints kernel. [ 1.725000] Disabling lock debugging due to kernel taint [ OK ] Started Generate environment for enigma2. [ 1.741000] systemd[1]: Started Generate environment for enigma2. [ OK ] Started Apply Kernel Variables. [ 1.768000] systemd[1]: Started Apply Kernel Variables. [ OK ] Mounted POSIX Message Queue File System. [ 1.777000] systemd[1]: Mounted POSIX Message Queue File System. [ 1.785000] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ OK ] Started Remount Root and Kernel File Systems. [ 1.797000] systemd[1]: Started Remount Root and Kernel File Systems. [ OK ] Started Create list of required static device nodes ...current kernel. [ 1.809000] systemd[1]: Started Create list of required static device nodes for the current kernel. [ OK ] Started udev Coldplug all Devices. [ 1.818000] systemd[1]: Started udev Coldplug all Devices. [ 1.819000] systemd[1]: Starting Create static device nodes in /dev... Starting Create static device nodes in /dev... [ 1.828000] systemd[1]: Starting Load/Save Random Seed... Starting Load/Save Random Seed... [ OK ] Started Load/Save Random Seed. [ 1.933000] systemd[1]: Started Load/Save Random Seed. [ OK ] Started Create static device nodes in /dev. [ 2.079000] systemd[1]: Started Create static device nodes in /dev. [ 2.080000] systemd[1]: Starting udev Kernel Device Manager... Starting udev Kernel Device Manager... [ 2.094000] systemd[1]: Starting Local File Systems (Pre). [ OK ] Reached target Local File Systems (Pre). [ 2.097000] systemd[1]: Reached target Local File Systems (Pre). [ 2.097000] systemd[1]: Mounting /var/volatile... Mounting /var/volatile... [ 2.106000] systemd[1]: var-volatile.mount: Directory /var/volatile to mount over is not empty, mounting anyway. [ 2.117000] systemd[1]: Mounting /tmp... Mounting /tmp... [ OK ] Mounted /var/volatile. [ 2.146000] systemd[1]: Mounted /var/volatile. [ OK ] Mounted /tmp. [ 2.150000] systemd[1]: Mounted /tmp. [ 2.151000] systemd[1]: Starting Local File Systems. [ OK ] Reached target Local File Systems. [ 2.154000] systemd[1]: Reached target Local File Systems. [ 2.154000] systemd-udevd[109]: starting version 206 [ 2.155000] systemd[1]: Starting Recreate Volatile Files and Directories... Starting Recreate Volatile Files and Directories... [ OK ] Started udev Kernel Device Manager. [ 2.171000] systemd[1]: Started udev Kernel Device Manager. [ OK ] Started Recreate Volatile Files and Directories. [ 2.255000] systemd[1]: Started Recreate Volatile Files and Directories. [ 2.257000] systemd[1]: Starting Update UTMP about System Reboot/Shutdown... Starting Update UTMP about System Reboot/Shutdown... [ 2.286000] enter base init, xvd 20130918, vdc 20130918, rap 20130918, xpt 20130918 [ 2.302000] systemd[1]: Started Run pending postinsts. [ OK ] Started Update UTMP about System Reboot/Shutdown. [ 2.326000] systemd[1]: Started Update UTMP about System Reboot/Shutdown. [ OK ] Found device /dev/ttyS0. [ 2.345000] systemd[1]: Found device /dev/ttyS0. [ OK ] Found device /dev/tpm0. [ 2.750000] systemd[1]: Found device /dev/tpm0. [ 2.757000] 2:756132220 SMCA: controller reset timed out [ 2.768000] 2:767810542 SMCB: controller reset timed out [ 3.175000] register adapter [ 3.175000] register adapter [ 3.176000] register adapter [ 3.176000] register adapter [ 3.177000] register adapter [ 3.178000] using fpga version 47 [ 3.178000] tsmux set tsports reg 00 to val 00 [ 3.179000] tsmux set tsports reg 01 to val 01 [ 3.179000] tsmux set tsports reg 02 to val 02 [ 3.180000] tsmux set tsports reg 03 to val 03 [ 3.180000] tsmux set tsports reg 04 to val 04 [ 3.181000] tsmux set tsports reg 05 to val 05 [ 3.181000] tsmux set ciclk reg 34 to val 00 [ 3.182000] tsmux set cisource reg 06 to val 00 [ 3.182000] tsmux set ciclk reg 34 to val 00 [ 3.183000] tsmux set cisource reg 07 to val 01 [ 3.184000] FP Version 1.15 [ 3.185000] input: dreambox front panel as /devices/virtual/input/input0 [ 3.289000] fp cmd 31 retry [ 3.290000] fp req. retransmit [ 3.391000] fp cmd 27 retry [ 3.393000] fp req. retransmit [ 3.493000] fp cmd 27 retry [ 3.595000] fp cmd 12 retry [ 3.699000] fp cmd 48 retry [ 3.802000] fp cmd 48 retry [ 3.903000] fp cmd 48 retry [ 4.006000] fp cmd 48 retry [ 4.109000] fp cmd 48 retry [ 4.212000] fp cmd 48 retry [ 4.213000] fp req. retransmit [ 4.313000] fp cmd 48 retry [ 4.416000] fp cmd 48 retry [ 4.519000] fp cmd 48 retry [ 4.522000] ina2xx 5-0040: power monitor ina219 (Rshunt = 10000 uOhm) [ 4.535000] set input to 0 [ 4.535000] set fb to 2(-1) [ 4.543000] HDMI: ignore false positive disconnect! [ 4.544000] HDMI: now powered down [ 4.544000] HDMI: Unable to retrieve Rx EDID info.. no rx device [ 4.545000] using 50.00Hz as MonitorRefreshRate [ 4.546000] SET FORMAT: display[0], format=42 [ 4.587000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8) [ 4.598000] HDMI: use logical CEC address 3 [ 4.598000] CEC init completed! [ 4.727000] enable mad [ 4.727000] VIDEO0: set fallback framerate to 60000 [ 4.728000] VIDEO0: set progressive override mode to 1 [ 4.728000] VIDEO0: set streamtype! [ 4.729000] set MPEG2 [ 4.729000] sw rave disabled! [ 4.737000] CEC send ok! [ 4.802000] VIDEO1: set fallback framerate to 60000 [ 4.803000] VIDEO1: set progressive override mode to 1 [ 4.803000] VIDEO1: set streamtype! [ 4.804000] set MPEG2 [ 4.804000] sw rave disabled! [ 4.818000] set ac3 to downmix [ 4.818000] set ac3plus to use_hdmi_caps [ 4.819000] set aac to downmix [ 4.819000] DVB: registering new adapter (BCM7435) [ 4.910000] autodetecting NIMs... [ 4.911000] slot 0 [ 4.912000] ret: 2, feid: 14 [ 4.912000] Found: Slot A, ID: 14 (by CA) [ 4.912000] slot 2 [ 4.913000] ret: -145, feid: ff [ 4.913000] slot 3 [ 4.914000] ret: -145, feid: ff [ 4.914000] Initializing adapter 0 (BCM4506-DVB-S2) [ 4.967000] bcm4506: found 4506, revision 0(a1) [ 4.968000] bcm4506: bcm_initAP [ 4.968000] DVB: registering adapter 0 frontend 0 (bcm4506)... [ 4.969000] Initializing adapter 1 (BCM4506-DVB-S2) [ 4.973000] bcm4506: found 4506, revision 0(a1) [ 4.974000] DVB: registering adapter 0 frontend 1 (bcm4506)... [ 4.975000] CI stopped... [ 4.975000] CI stopped... [ 4.975000] init ALSA! [ 4.977000] registered vtuner misc/vtuner0, minor 50 [ 4.979000] registered vtuner misc/vtuner1, minor 49 [ 4.980000] HDMI-RX: init [ 4.980000] bcm4506: upload & start firmware [ 4.981000] HDMI-RX: no device attached [ 4.981000] systemd[1]: Starting Sound Card. [ 4.982000] HDMI-RX: video format change event [ 4.983000] HDMI-RX: hdmiInput0 Receiving DVI format RGB (Default)HDMI-RX: hdmiInput0 Color Space change from 'RGB (Default)' to 'RGB (Default)' [ OK [ 4.984000] HDMI-RX: init done ] Reached target[ 4.985000] bcm_vce_init() [ 4.985000] bcm_vce_init() 0 Sound Card. [ 4.988000] systemd[1]: Reached target Sound Card. [ 5.051000] vice0: allocate output buffers [ 5.063000] input: dreambox remote control (native) as /devices/virtual/input/input1 [ 5.064000] input: dreambox advanced remote control (native) as /devices/virtual/input/input2 [ 5.067000] input: dreambox ir keyboard as /devices/virtual/input/input3 [ 5.069000] input: dreambox ir mouse as /devices/virtual/input/input4 [ 5.095000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ OK ] Started Load Kernel Modules. [ OK ] Reached target System Initialization. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on streamproxy.socket. [ OK ] Listening on busybox-telnetd.socket. [ OK ] Listening on dropbear.socket. [ OK ] Listening on vsftpd.socket. [ OK ] Listening on tpmd.socket. [ OK ] Reached target Timers. [ OK ] Listening on dbttcd.socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. Starting enigma2... [ OK ] Reached target Basic System. Starting Avahi mDNS/DNS-SD Stack... Starting RPC Bind... Starting tpmd.service... Starting Telephony service... Starting dbttcd.service... Starting Connection service... Starting D-Bus System Message Bus... [ OK ] Started D-Bus System Message Bus. Starting Login Service... Starting Automounts filesystems on demand... [ OK ] Started RPC Bind. [ OK ] Reached target RPC Port Mapper. Starting NFS file locking service... [ OK ] Started NFS file locking service. Starting NFS Server... [ OK ] Started tpmd.service. [ 5.748000] ata2: link is slow to respond, please be patient (ready=0) [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Telephony service. [ OK ] Started Connection service. [ OK ] Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems. Starting Trigger Flushing of Journal to Persistent Storage... [ OK ] Started Login Service. [ 5.842000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 5.850000] NFSD: starting 90-second grace period [ OK ] Started Automounts filesystems on demand. [ OK ] Started NFS Server. Starting NFS Mount Daemon... [ OK ] Started NFS Mount Daemon. [ OK ] Started Trigger Flushing of Journal to Persistent Storage. Starting Permit User Sessions... [ OK ] Started Permit User Sessions. Starting Serial Getty on ttyS0... [ OK ] Started Serial Getty on ttyS0. Starting Getty on tty1... [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. [ OK ] Started dbttcd.service. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. [ 6.294000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.717000] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6.891000] ata2.00: ATA-9: WDC WD30PURX-64P6ZY0, 80.00A80, max UDMA/133 [ 6.892000] ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 6.893000] ata2.00: configured for UDMA/133 [ 6.894000] scsi 1:0:0:0: Direct-Access ATA WDC WD30PURX-64P 80.0 PQ: 0 ANSI: 5 [ 6.896000] sd 1:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 6.896000] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 6.898000] sd 1:0:0:0: [sda] Write Protect is off [ 6.899000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.933000] bcm4506: bcm4506: ap not running - start now [ 6.975000] sda: sda1 [ 6.976000] sd 1:0:0:0: [sda] Attached SCSI disk [ 7.020000] bcm4506: uCode 0x61 [ 7.038000] bcm4506: no bcm3445 detected [ 7.060000] bcm4506: no bcm3445 detected [ 7.381000] XFS (sda1): Mounting Filesystem [ 7.579000] XFS (sda1): Starting recovery (logdev: internal) [ 7.637000] XFS (sda1): Ending recovery (logdev: internal) [ 8.089000] bcm4506: channel 0 is in normal mode now [ 8.102000] bcm4506: channel 0 is sleeping now [ 8.106000] bcm4506: channel 1 is in normal mode now [ 8.121000] bcm4506: channel 1 is sleeping now [ 8.163000] bcmfb: enable manual blit [ 8.229000] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8) [ 8.744000] 0 ms: [ 8.769000] 25 ms: 0 [ 8.778000] 9 ms: 0 [ 8.782000] 4 ms: 0 opendreambox 2.2.0 dm7080 ttyS0 dm7080 login: [ 9.610000] tsmux set cisource reg 06 to val 06 [ 9.610000] tsmux set cisource reg 07 to val 06 [ 9.611000] tsmux set tsports reg 00 to val 06 [ 9.612000] tsmux set tsports reg 01 to val 05 [ 9.613000] tsmux set tsports reg 02 to val 01 [ 9.614000] tsmux set tsports reg 03 to val 00 [ 9.627000] 845 ms: 0 [ 9.655000] 27 ms: 0 [ 9.656000] 0 ms: 0 [ 9.668000] 11 ms: 0 [ 9.834000] 165 ms: 0 [ 9.869000] 34 ms: 0 [ 9.880000] 10 ms: 0 [ 9.884000] 3 ms: 0 [ 9.885000] 0 ms: 0 [ 9.886000] 0 ms: 0 [ 10.369000] 482 ms: 0 [ 10.371000] 1 ms: 0 [ 10.402000] bcmgenet bcmgenet.0: eth0: link up, 100 Mbps, full duplex [ 10.403000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 10.467000] 96 ms: 0 [ 10.468000] 1 ms: 0 [ 10.497000] 29 ms: 0 [ 10.616000] 119 ms: 0 [ 10.617000] 1 ms: 0 [ 10.621000] 4 ms: 0 [ 10.622000] 1 ms: 0 [ 10.623000] 1 ms: 0 [ 10.625000] 2 ms: 0 [ 10.632000] 6 ms: 0 [ 10.641000] 9 ms: 0 [ 10.903000] 262 ms: 0 [ 10.904000] 1 ms: 0 [ 10.909000] 5 ms: 0 [ 10.930000] 21 ms: 0 [ 10.939000] 8 ms: 0 [ 10.945000] 6 ms: 0 [ 10.946000] 0 ms: 0 [ 10.948000] 1 ms: 0 [ 10.953000] 5 ms: 0 [ 11.571000] 618 ms: 0 [ 11.619000] 48 ms: 0 [ 12.892000] 1273 ms: 0 [ 12.926000] 34 ms: 99 [ 12.927000] 1 ms: 99 [ 12.946000] 19 ms: 99 [ 12.948000] 2 ms: 99 [ 12.950000] 1 ms: 99 [ 12.954000] 3 ms: 99 [ 12.959000] 5 ms: 99 [ 12.967000] 8 ms: 99 [ 12.969000] 1 ms: 99 [ 12.990000] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8) [ 13.127000] 158 ms: 99 [ 13.175000] 48 ms: 99 [ 13.180000] set input to 0 [ 13.180000] set fb to 2(-1) [ 13.191000] vsyncdelay [ 13.191000] rectadjust [ 13.191000] l: 0 t: 0 h: 720 w: 576 [ 13.191000] synclock [ 13.192000] set current avs auto aspect to 16:9 [ 13.192000] set sb to 3(1) [ 13.194000] set ac3 to passthrough [ 13.195000] set ac3plus to use_hdmi_caps [ 13.200000] 24 ms: 99 [ 13.204000] 4 ms: 99 [ 13.210000] 6 ms: 99 [ 13.280000] 70 ms: 99 [ 13.286000] 6 ms: 99 [ 14.022000] set current avs auto aspect to 16:9 [ 14.023000] set sb to 3(1) [ 14.027000] set current avs auto aspect to 16:9 [ 14.027000] set sb to 3(1) [ 14.028000] set current avs auto aspect to 16:9 [ 14.028000] set sb to 3(1) [ 14.031000] set current avs auto aspect to 16:9 [ 14.032000] set sb to 3(1) [ 14.033000] set current avs auto aspect to 16:9 [ 14.033000] set sb to 3(1) [ 14.034000] set current avs auto aspect to 16:9 [ 14.034000] set sb to 3(1) [ 14.037000] set current avs auto aspect to 16:9 [ 14.038000] set sb to 3(1) [ 14.038000] set current avs auto aspect to 16:9 [ 14.039000] set sb to 3(1) [ 14.039000] set current avs auto aspect to 16:9 [ 14.040000] set sb to 3(1) [ 14.043000] using 50.00Hz as MonitorRefreshRate [ 14.043000] shared window not available [ 14.107000] SET FORMAT: display[0], format=37 [ 14.107000] shared window not available [ 14.247000] set current avs auto aspect to 16:9 [ 14.247000] set sb to 3(1) [ 14.248000] set current avs auto aspect to 16:9 [ 14.249000] set sb to 3(1) [ 14.253000] set current avs auto aspect to 16:9 [ 14.253000] set sb to 3(1) [ 14.254000] set current avs auto aspect to 16:9 [ 14.254000] set sb to 3(1) [ 14.255000] set current avs auto aspect to 16:9 [ 14.256000] set sb to 3(1) [ 17.431000] CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3 [ 17.672000] 4386 ms: 99 [ 17.681000] 9 ms: 99 [ 17.684000] tsmux set ciclk reg 34 to val 00 [ 17.686000] tsmux set ciclk reg 34 to val 00 [ 17.691000] 10 ms: 99 [ 19.845000] set mute 0 1 [ 20.431000] 2740 ms: 99 [ 20.973000] 542 ms: 99 [ 21.017000] 43 ms: 99 [ 21.022000] 5 ms: 99 [ 21.153000] bcm4506: channel 0 is in normal mode now [ 21.165000] start pcr0 on dmx 3 pid:2ff index 2 [ 21.167000] start audio on dmx 3 pid:300 [ 21.167000] audio xpt start [ 21.167000] sync is off so we enable it [ 21.168000] demux-index 3 pcr0pid 2ff [ 21.168000] using 2 as pcr0 pidchannel [ 21.169000] MPEG [ 21.169000] audio: streamtype set 0 [ 21.169000] audio: streamtype_set: stop rave [ 21.170000] !!!!!!!!!! add stereo input to mixer DAC [ 21.171000] !!!!!!!!!! add stereo input to mixer SPDIF [ 21.171000] !!!!!!!!!! add stereo input to mixer MAI [ 21.172000] audio: streamtype_set: restart rave [ 21.178000] audio: decoder start [ 21.178000] video delay 0 (0 ms) [ 21.179000] total video delay: 0 (0 ms) [ 21.183000] start video0 on dmx 3 pid:2ff [ 21.183000] total video delay: 0 (0 ms) [ 21.189000] VIDEO0: start decode [ 21.621000] CEC send ok! [ 21.793000] CEC send ok! [ 21.897000] CEC send ok! [ 21.974000] CEC send ok! [ 22.087000] CEC send ok! [ 22.165000] CEC send ok! [ 22.240000] CEC send ok!