Posts by sunlight786

    I make E1 bouqts by using sofware called dreambox services Database. after creat the bouqts i saved in my pc in a folder then i open dreambobEDIT latest. and in set up i chosse open as enigima 1.
    but when i open the saved folder it reach to 55% and get this errer!

    Quote

    hello every one,
    i have original dm8000-s and accedently i have flashed via web i think wrong image and now it just show me erro1 no ca found on front panel.i have tried to conect via null cable and dream up 1.3.3.1 but nothing happend.can any one please help me to fix it.many thanks

    hello,


    i am trying to set my dm8000s with 16input and 8 put out multi swich with 1m dish +4 qoutro lnb , s


    and my set up is 28.2E , 19.2E , 13.0E and 9.0e


    and on multi switch satellite conection are{ SAT A=28.2E} {SAT B=19.2E} {SAT C=13.0E} {SAT D=9.0E}


    and in dm800 tuner as i menu




    Press Menu


    Select " Setup " and press Ok.


    Select "Service Searching " and press OK


    Select "Tuner Configuration " and press OK


    Select a tuner and press OK (you need to do the same for each tuner).


    On " Configuration Mode "choose Simple


    On "Mode "select Diseqc A / B / C / D


    For the port set -up you have to have the same in each port as you do on each input of the multi -switch switch / Diseqc .


    Port A = Input 1


    Port B = Input 2


    Port C Input 3 =


    Port D Input 4 =




    Leave the "Set Voltage & 22kHz "as yes


    On the " Send only on Diseqc Satellite Change " to Yes




    NOW I HAVE SET ALL 4 TUNER EXACT SAME BUT WHEN I SELECT AUTOMATICALYY SCAN THERE I ONLY SEE TUNER -A ALL OTHERS ARE MISSING .


    i have disable the tuner A, C , D AND LET TUNER B RUNNING. IN THAT CASE I CAN SEE BUT WHEN I SELECT ALL IN ONE TUNERB TIME THEN I HAVE PROBLEM .


    i believe i should be as


    Each tuner needs to be scanned for channels on all four satellites or go into automatic scan and all tuners set to " yes "the scan will then four tuners simultaneously unfortunatly but in my case it is not happening.




    please please help me out as i am completly new with this box .


    Thanls