Hi,
planned added support for Multistream for HW whit use STV0903BAC ?
Some info on: http://patchwork.linuxtv.org/patch/13756/
very old status from 2009~2010 - http://ipbox.wz.cz/cool/mediaset.htm
Hi,
planned added support for Multistream for HW whit use STV0903BAC ?
Some info on: http://patchwork.linuxtv.org/patch/13756/
very old status from 2009~2010 - http://ipbox.wz.cz/cool/mediaset.htm
Hi,
work audio on HD channel`s from 5 West ?
In SD show audio track, but in HD without audio track
root@dm500hd:~# dvbsnoop -n 1 -nph 0x032a
dvbsnoop V1.4.51 -- http://dvbsnoop.sourceforge.net/
------------------------------------------------------------
SECT-Packet: 00000001 PID: 810 (0x032a), Length: 142 (0x008e)
Time received: Sun 2011-05-22 18:01:24.210
------------------------------------------------------------
PID: 810 (0x032a)
Guess table from table id...
PMT-decoding....
Table_ID: 2 (0x02) [= Program Map Table (PMT)]
section_syntax_indicator: 1 (0x01)
(fixed '0'): 0 (0x00)
reserved_1: 3 (0x03)
Section_length: 139 (0x008b)
Program_number: 401 (0x0191)
reserved_2: 3 (0x03)
Version_number: 5 (0x05)
current_next_indicator: 1 (0x01) [= valid now]
Section_number: 0 (0x00)
Last_Section_number: 0 (0x00)
reserved_3: 7 (0x07)
PCR PID: 811 (0x032b)
reserved_4: 15 (0x0f)
Program_info_length: 58 (0x003a)
MPEG-DescriptorTag: 9 (0x09) [= CA_descriptor]
descriptor_length: 15 (0x0f)
CA_system_ID: 1280 (0x0500) [= France Telecom]
reserved: 7 (0x07)
CA_PID: 7515 (0x1d5b)
Private Data:
0000: 10 01 00 13 01 20 14 03 04 19 50 ..... ....P
MPEG-DescriptorTag: 9 (0x09) [= CA_descriptor]
descriptor_length: 15 (0x0f)
CA_system_ID: 1280 (0x0500) [= France Telecom]
reserved: 7 (0x07)
CA_PID: 7516 (0x1d5c)
Private Data:
0000: 10 01 00 13 01 20 14 03 04 19 a0 ..... .....
MPEG-DescriptorTag: 9 (0x09) [= CA_descriptor]
descriptor_length: 15 (0x0f)
CA_system_ID: 1280 (0x0500) [= France Telecom]
reserved: 7 (0x07)
CA_PID: 7518 (0x1d5e)
Private Data:
0000: 10 01 00 13 01 20 14 03 04 28 00 ..... ...(.
MPEG-DescriptorTag: 9 (0x09) [= CA_descriptor]
descriptor_length: 5 (0x05)
CA_system_ID: 19164 (0x4adc) [= LogiWays]
reserved: 7 (0x07)
CA_PID: 7519 (0x1d5f)
Private Data:
0000: fe .
Stream_type loop:
Stream_type: 27 (0x1b) [= AVC video stream as defined in ITU-T Rec. H.264 | ISO/IEC 14496-10 Video]
reserved_1: 7 (0x07)
Elementary_PID: 811 (0x032b)
reserved_2: 15 (0x0f)
ES_info_length: 3 (0x0003)
MPEG-DescriptorTag: 17 (0x11) [= STD_descriptor]
descriptor_length: 1 (0x01)
reserved_1: 127 (0x7f)
leak_valid_flag: 1 (0x01)
Stream_type: 6 (0x06) [= ITU-T Rec. H.222.0 | ISO/IEC 13818-1 PES packets containing private data]
reserved_1: 7 (0x07)
Elementary_PID: 812 (0x032c)
reserved_2: 15 (0x0f)
ES_info_length: 10 (0x000a)
MPEG-DescriptorTag: 10 (0x0a) [= ISO_639_language_descriptor]
descriptor_length: 4 (0x04)
ISO639_language_code: fra
Audio_type: 0 (0x00) [= undefined]
DVB-DescriptorTag: 122 (0x7a) [= enhanced_AC-3_descriptor]
descriptor_length: 2 (0x02)
component_type_flag: 1 (0x01)
bsid_flag: 0 (0x00)
mainid_flag: 0 (0x00)
asvc_flag: 0 (0x00)
mixinfoexists: 0 (0x00)
substream1_flag: 0 (0x00)
substream2_flag: 0 (0x00)
substream3_flag: 0 (0x00)
component_type: 196 (0xc4) [= TODO: $$$ - AC3 Component type]
Stream_type: 6 (0x06) [= ITU-T Rec. H.222.0 | ISO/IEC 13818-1 PES packets containing private data]
reserved_1: 7 (0x07)
Elementary_PID: 813 (0x032d)
reserved_2: 15 (0x0f)
ES_info_length: 10 (0x000a)
MPEG-DescriptorTag: 10 (0x0a) [= ISO_639_language_descriptor]
descriptor_length: 4 (0x04)
ISO639_language_code: qaa
Audio_type: 0 (0x00) [= undefined]
DVB-DescriptorTag: 122 (0x7a) [= enhanced_AC-3_descriptor]
descriptor_length: 2 (0x02)
component_type_flag: 1 (0x01)
bsid_flag: 0 (0x00)
mainid_flag: 0 (0x00)
asvc_flag: 0 (0x00)
mixinfoexists: 0 (0x00)
substream1_flag: 0 (0x00)
substream2_flag: 0 (0x00)
substream3_flag: 0 (0x00)
component_type: 194 (0xc2) [= TODO: $$$ - AC3 Component type]
Stream_type: 6 (0x06) [= ITU-T Rec. H.222.0 | ISO/IEC 13818-1 PES packets containing private data]
reserved_1: 7 (0x07)
Elementary_PID: 814 (0x032e)
reserved_2: 15 (0x0f)
ES_info_length: 10 (0x000a)
DVB-DescriptorTag: 89 (0x59) [= subtitling_descriptor]
descriptor_length: 8 (0x08)
ISO639_language_code: fra
Subtitling_type: 36 (0x24) [= reserved]
Composition_page_id: 1 (0x0001)
Ancillary_page_id: 1 (0x0001)
Stream_type: 6 (0x06) [= ITU-T Rec. H.222.0 | ISO/IEC 13818-1 PES packets containing private data]
reserved_1: 7 (0x07)
Elementary_PID: 815 (0x032f)
reserved_2: 15 (0x0f)
ES_info_length: 10 (0x000a)
DVB-DescriptorTag: 89 (0x59) [= subtitling_descriptor]
descriptor_length: 8 (0x08)
ISO639_language_code: fra
Subtitling_type: 20 (0x14) [= reserved]
Composition_page_id: 2 (0x0002)
Ancillary_page_id: 2 (0x0002)
CRC: 4066644899 (0xf26413a3)
==========================================================
Alles anzeigen
Ein Problem bei niedrigen /SR-300 16 Ost/und hohen /DVB-S2 SR-44100 27 West/ SR ?
Alles anzeigenHey
Found a work-around to the problem - Maybe this can put Dream Multimedia on the trace of the thing that causes the problem ?
Go to "Setup / System / A/V Settings /"
Go down to "General PCM Delay" and set it to 50 or 75.
Then it works !!!
Regards
MrForce
(Thanx to "ked" from Digsat.net)
Hi, testing on HE-AAC radio on 12418 V 1 West , but no work
Maybe work low SR (SR-557,700,716) after change restricted in source code drivers ?
enigma2_v3.frm:
[info]
Name=Enigma 2 v3 (DM 7025)
Type=5
[ftp]
user=root
passwd=dreambox
satellites=/etc/tuxbox
services=/etc/enigma2
enigma2_v4.frm:
[info]
Name=Enigma 2 v4 (DM 800)
Type=7
[ftp]
user=root
passwd=dreambox
satellites=/etc/tuxbox
services=/etc/enigma2
search some info about debug output from dccamd
ZitatAlles anzeigenOriginally posted by Likvid
I am trying to make my EMP Centauri 8/1 switch to work with my 7025 receiver.
I am using DiseqC 1.1 and configured the ports in the uncommited, input 1, input 2 etc etc.....
The receiver is not working any good and when i have a signal on one channel and then change channel on the same satellite i get Tune Failed.
After rebooting it works again to change some channels, after a few minutes it starts doing this Tune Failed annoyance again.
What is going on? anyone else got problems?
original set from EMP:
http://www.emp-centauri.cz/pdf/dreambox_7025_setting-en.pdf
or
http://www.emp-centauri.cz/pdf/dreambox_7025_setting-cz.pdf
provider transmit MPEG sound , but send info about AC3 in PMT , e2 read this bad info
1West - 12634 V - Discovery Ch - SID 0x0aa0
1West - 12643 V - HBO CE - SID 0x0afa
root@dm800:~# dvbsnoop -s feinfo
dvbsnoop V1.4.51 -- http://dvbsnoop.sourceforge.net/
---------------------------------------------------------
FrontEnd Info...
---------------------------------------------------------
Device: /dev/dvb/adapter0/frontend0
Basic capabilities:
Name: "cx24116"
Frontend-type: QPSK (DVB-S)
Frequency (min): 925.000 MHz
Frequency (max): 2175.000 MHz
Frequency stepsiz: 125.000 MHz
Frequency tolerance: 0.000 MHz
Symbol rate (min): 1.000000 MSym/s
Symbol rate (max): 45.000000 MSym/s
Symbol rate tolerance: 0 ppm
Notifier delay: 0 ms
Frontend capabilities:
auto inversion
FEC 1/2
FEC 2/3
FEC 3/4
FEC 4/5
FEC 5/6
FEC 6/7
FEC 7/8
FEC AUTO
QPSK
Current parameters:
Frequency: 2006.800 MHz
Inversion: OFF
Symbol rate: 27.500000 MSym/s
FEC: FEC 3/4
root@dm800:~# dvbsnoop -n 1 -nph 0x0b90
dvbsnoop V1.4.51 -- http://dvbsnoop.sourceforge.net/
------------------------------------------------------------
SECT-Packet: 00000001 PID: 2960 (0x0b90), Length: 106 (0x006a)
Time received: Wed 2008-08-27 22:27:35.086
------------------------------------------------------------
PID: 2960 (0x0b90)
Guess table from table id...
PMT-decoding....
Table_ID: 2 (0x02) [= Program Map Table (PMT)]
section_syntax_indicator: 1 (0x01)
(fixed '0'): 0 (0x00)
reserved_1: 3 (0x03)
Section_length: 103 (0x0067)
Program_number: 6000 (0x1770)
reserved_2: 3 (0x03)
Version_number: 4 (0x04)
current_next_indicator: 1 (0x01) [= valid now]
Section_number: 0 (0x00)
Last_Section_number: 0 (0x00)
reserved_3: 7 (0x07)
PCR PID: 1000 (0x03e8)
reserved_4: 15 (0x0f)
Program_info_length: 17 (0x0011)
Stream_type: 4 (0x04) [= ISO/IEC 13818-3 Audio] -> MPEG Audio
reserved_1: 7 (0x07)
Elementary_PID: 2005 (0x07d5)
reserved_2: 15 (0x0f)
ES_info_length: 21 (0x0015)
DVB-DescriptorTag: 82 (0x52) [= stream_identifier_descriptor]
descriptor_length: 1 (0x01)
component_tag: 200 (0xc8)
MPEG-DescriptorTag: 14 (0x0e) [= maximum_bitrate_descriptor]
descriptor_length: 3 (0x03)
reserved_1: 3 (0x03)
maximum_bitrate: 654 (0x0000028e) (= 32700 Bytes/sec)
MPEG-DescriptorTag: 10 (0x0a) [= ISO_639_language_descriptor]
descriptor_length: 4 (0x04)
ISO639_language_code: eng
Audio_type: 0 (0x00) [= undefined]
DVB-DescriptorTag: 106 (0x6a) [= AC3_descriptor] -> bad info
descriptor_length: 5 (0x05)
component_type_flag: 1 (0x01)
bsid_flag: 1 (0x01)
mainid_flag: 1 (0x01)
asvc_flag: 1 (0x01)
reserved: 0 (0x00)
component_type: 1 (0x01) [= TODO: $$$ - AC3 Component type]
bsid: 5 (0x05)
mainid: 2 (0x02)
asvc: 3 (0x03)
thanks to info
Please provide some information about the hard- and software used.
Box type: DM800
GUI (enigma1/enigma2): enigma2
Firmware version: Tenigma2_rel24-Jun 5 2008 / dev-2008-05-11
your question
What correct definition DVB-S2 transponder in satellites.xml ?
<transponder frequency="11592000" symbol_rate="28500000" polarization="1" fec_inner="9"/>
this not show signal
[Blockierte Grafik: http://enosat.euweb.cz/dvbs2.jpg]
DVB-S transponder show OK
[Blockierte Grafik: http://enosat.euweb.cz/dvbs.jpg]
on some source find this info:
<transponder frequency="11592000" symbol_rate="28500000" polarization="1" fec_inner="9" modulation="1" system="1"/>
but also not work