16.(bug) Timer recording doesnt start if before event you are on some channel which sends wrong time.
_ (it zap to tmed channel, but after nothing happens)
17.a.(feat) please do able store transponders on which time syncronisation isnt acepted.
17.b.(feat) time synchronisation from pc (with checkbox 'only from pc')
it is known, but noone cares about it 
bug fixes/features request dm500
solution:
http://dream.altmaster.net/showpost.php?p=10219&postcount=1
14. can someone increase dealay time of message 'Can't decode'
_ it comes on each zap on dm7020, but on dm500 it gone only after first zap to one FTA channel
_ (cards are local and i haven't problems with decoding signal, just that message bugging a lot :))
15. as you know RC of smal boxes havent some buttons and in this case
_ some operations arent posible(also using shift isnt so useful on big RC),
_ there is my vision about optimise using dream in File Play mode:
red(single) - backward(as it is now)
red(double) - jump back to last marker or begin of file
red(keep in touch) - dialog how many minutes(as it is now) + list of posible points from markers list
green(single) - Play(as it is now)
green(double) - call new 'File Play menu'
yelow(single) - Pause(as it is now)
blue(single) - forward(as it is now)
blue(double) - jump forward to next marker or end of file
blue(keep in touch) - dialog how many minutes(as it is now) + list of posible points from markers list
and there is list of operations which can be call from [File Play menu]
(0) record(on/off) that line is needed only for first small/black rc of dm500 which haven Radio/TV buttons
(1) new marker(in point when menu were called)
(2) new marker(current position)
(3) delete previous marker
(...) maybe some edit functions there can come
first try dirrectly without disequ
if then works then DM 7020Si - Diseqc Configuration
press MENU when you are in cahnnel list
loks like hyperband isnt enable (maybe by firmware maybe by hardware)
had same problem with Philips panel 37PF9731 - analogue were able to receive from hyperband but terrestial werent
got only last(CH21) frequency of my cable operator
long time ago have asked for feature which able save audio level + - correction
bug fixes/features request dm500
also cant understand why dreamboxes gives so low sound level on output
(any other equipment gives much louder)
dreamboxes doesnt like some of disequ swich models
have in my opinion situation when old dm500 with Philips tuner works well, but newer with Alphs doesnt work with same cable
after have changed Disequ1x4 swich problem has gone
also it can be cause corupted setings by function "autoservices scan"
on some positions like 36E i use only manual scan for each transponder
and take marked option Menu->Setup->Expert Setup->Disable autoservices update
(!! old setings must be deleted before)
have reported about that problem long time ago
bug fixes/features request dm500
part of that problem comes when on one satelitte position presented more than one transponder with same TransponderID like:
12190L; 12226 L; 12380 L on 36E have same NID-TID(112-2)
http://www.lyngsat.com/36east.html
also i have similar problems with few transponders on 13E, but i didnt check why
do you have access card?
dont remember what changes i was made in attached plugin
cant access now my home dream where i use litle bit modified plugin from D-Box2
little fix for file play mode
and looks like that script wont be needed after some shot time,
now CVS remebers last audio channel and Left/Right by self - thanks to Dbluelle
script is needed only in case PremiereWorld's Dirrect subservices are stored in some bouquet as channels and you prefere English audio track
(part of file /var/tuxbox/config/enigma/userbouquet.dbe01.tv)
#SERVICE: 1:0:1:12:4:85:c00000:0:0:0:
#SERVICE: 1:0:1:d4:1:85:c00000:0:0:0:
#DESCRIPTION: PremiereDirect 1 a
#SERVICE: 1:0:1:dc:3:85:c00000:0:0:0:
#DESCRIPTION: PremiereDirect 1 b
#SERVICE: 1:0:1:e0:2:85:c00000:0:0:0:
#DESCRIPTION: PremiereDirect 1 c
#SERVICE: 1:0:1:e3:11:85:c00000:0:0:0:
#DESCRIPTION: PremiereDirect 2 a
#SERVICE: 1:0:1:f4:3:85:c00000:0:0:0:
#DESCRIPTION: PremiereDirect 2 b
#SERVICE: 1:0:1:f3:3:85:c00000:0:0:0:
#DESCRIPTION: PremiereDirect 3 a
#SERVICE: 1:0:1:d1:4:85:c00000:0:0:0:
#DESCRIPTION: PremiereDirect 4 a
#SERVICE: 1:0:1:f2:3:85:c00000:0:0:0:
#DESCRIPTION: PremiereDirect 4 b
#SERVICE: 1:0:1:d0:4:85:c00000:0:0:0:
#DESCRIPTION: PremiereDirect 5 a
#SERVICE: 1:0:1:e1:2:85:c00000:0:0:0:
#DESCRIPTION: PremiereDirect 5 b
#SERVICE: 1:0:1:e2:11:85:c00000:0:0:0:
#DESCRIPTION: PremiereDirect 9
#SERVICE: 1:0:1:a:2:85:c00000:0:0:0:
#SERVICE: 1:0:1:b:2:85:c00000:0:0:0:
#SERVICE: 1:0:1:2b:2:85:c00000:0:0:0:
#SERVICE: 1:0:1:9:2:85:c00000:0:0:0:
#SERVICE: 1:0:1:14:3:85:c00000:0:0:0:in this case that subservices has two German("German"; "German"; "Dolby Digital (AC3)";) tracks and cvs stores the first one
propably it comes cause some other bug:
if channel is called from geen button then same subservice has tracks "Tonoption 1"; "Tonoption 2"; "Dolby Digital (AC3)";
p.s.
where last audio channels are stored by CVS?
p.s.2
had reported about enigma crashes on call http://10.0.0.185/cgi-bin/status when opened menu->Setup->Services Searching->Manual Transponder Scan
that bug isnt gone
nice,
someone has touch that problem,
but looks like my favorite image [Moderator] Image is in violation of the Boardrules [/Moderator] is based on older CVS and havent that feature
can i ask you to countinue(finish)
look in my script it remembers only for channels where change from default audio track which is set by
config>s:/extras/audiochannelspriority=Russian#russian#rus#rus.#English#englisch#engl#Original#orj#ORY#ory#orig#org#dos#Tonoption 2#
the full version must have button "Remember" in Audio Menu
in case audio track is changed and button is presed then that settings must be harder than line s:/extras/audiochannelspriority= in config file
im asking cause not allways it needed for left/right save but sometime to store some other audio track.
example is subservices of PremiereWorld, if i chose chanel from subservices menu then they have audio tracks "Tonoption 1"; "Tonoption 2"; "Dolby Digital (AC3)";
but if subservice is stored as channel in list then it has "German"; "German"; "Dolby Digital (AC3)";
there is my collection of services where s:/extras/audiochannelspriority= doesnt help and some other track must be stored
/var/script>SetAudio_Left-Right_userscript.txt
1:0:1:11f:1:1:322f4f:0:0:0: Track:2 Language: Travel Sirius (5.0E) 06.11.24. 13:39:07
1:0:1:11f:1:1:32d080:0:0:0: Track:2 Language: Travel Sirius (5.0E) 06.11.24. 13:39:07
1:0:1:c9:2:46:fff60000:0:0:0: Track:0 Language:0x0191 Nat Geo Channel Thor (1.0W) 06.11.24. 13:39:07
1:0:1:d4:1:85:c00000:0:0:0: Track:1 Language:0x0201 n/a Astra 19.2E 06.11.24. 13:40:31
1:0:1:dc:3:85:c00000:0:0:0: Track:1 Language:0x0301 n/a Astra 19.2E 06.11.24. 13:40:40
1:0:1:e0:2:85:c00000:0:0:0: Track:1 Language:0x0c01 n/a Astra 19.2E 06.11.24. 13:40:53
1:0:1:e3:11:85:c00000:0:0:0: Track:1 Language:0x0e01 n/a Astra 19.2E 06.11.24. 13:41:02
1:0:1:f4:3:85:c00000:0:0:0: Track:1 Language:0x0c01 n/a Astra 19.2E 06.11.24. 13:41:10
1:0:1:f3:3:85:c00000:0:0:0: Track:1 Language:0x0b01 n/a Astra 19.2E 06.11.24. 13:41:22
1:0:1:d1:4:85:c00000:0:0:0: Track:1 Language:0x0d01 n/a Astra 19.2E 06.11.24. 13:41:30
1:0:1:f2:3:85:c00000:0:0:0: Track:1 Language:0x0a01 n/a Astra 19.2E 06.11.24. 13:41:38
1:0:1:d0:4:85:c00000:0:0:0: Track:1 Language:0x0c01 n/a Astra 19.2E 06.11.24. 13:41:47
1:0:1:e1:2:85:c00000:0:0:0: Track:1 Language:0x0d01 n/a Astra 19.2E 06.11.24. 13:41:58
1:0:1:e2:11:85:c00000:0:0:0: Track:1 Language:0x0d01 n/a Astra 19.2E 06.11.24. 13:42:06
1:0:7:f3:3:85:c00000:0:0:0: Track:1 Language:0x0b01 n/a Astra 19.2E 06.11.24. 14:17:02
1:0:1:87a:4:56:320000:0:0:0: Track:0 Language: TV1000 East Sirius2/3 (5.0E) 06.12.09. 22:17:01
1:0:1:192:2:46:fff60000:0:0:0: Track:0 Language:0x02bd Cartoon Network Thor2/3/Intelsat10-02 (1.0W) 06.12.19. 19:13:11
1:0:1:2be:e:46:fff60000:0:0:0: Track:2 Language: Kiosk2 Thor2/3/Intelsat10-02 (1.0W) 06.12.20. 23:03:33also id like to ask for full+ version where will be able to store volume + - 10db correction
and full++ version with buton "use avg processing"
p.s.
after some 30h dm500 becomes to be so freezee cause my script, but dm7020 doesnt
with command netstat i can see a lot of unclosed connections,
how can i close them from script or use always same connection?
please one example how can i use "int MeinModus = eZapMain::getInstance()->getMode();" in bash script
i need it for: auto audio cahnnel(Left/Rigt) swich on dream(without other image)
currently i take info from web-if,
but after ~30hours dm500 comes to be freezy (dm7020 works well after week)
on bouth type of boxes i have a lot of unclosed tcp sessions by using web-if
root@dreambox_M1:~> netstat
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 localhost:www localhost:4288 TIME_WAIT
tcp 0 0 localhost:www localhost:4289 TIME_WAIT
tcp 0 0 localhost:www localhost:4290 TIME_WAIT
tcp 0 0 localhost:www localhost:4291 TIME_WAIT
tcp 0 0 localhost:www localhost:4292 TIME_WAIT
tcp 0 0 localhost:www localhost:4293 TIME_WAIT
tcp 0 0 localhost:www localhost:4294 TIME_WAIT
tcp 0 0 localhost:www localhost:4295 TIME_WAIT
tcp 0 0 localhost:www localhost:4296 TIME_WAIT
tcp 0 0 localhost:www localhost:4297 TIME_WAIT
tcp 0 0 localhost:www localhost:4298 TIME_WAIT
tcp 0 0 localhost:www localhost:4299 TIME_WAIT
tcp 0 0 localhost:www localhost:4300 TIME_WAIT
tcp 0 0 localhost:www localhost:4301 TIME_WAIT
tcp 0 0 localhost:www localhost:4302 TIME_WAIT
tcp 0 0 localhost:www localhost:4303 TIME_WAIT
tcp 0 0 localhost:www localhost:4304 TIME_WAIT
tcp 0 0 localhost:www localhost:4305 TIME_WAIT
tcp 0 0 localhost:www localhost:4306 TIME_WAIT
tcp 0 0 localhost:www localhost:4307 TIME_WAIT
tcp 0 0 localhost:www localhost:4308 TIME_WAIT
tcp 0 0 localhost:www localhost:4309 TIME_WAIT
tcp 0 0 localhost:www localhost:4310 TIME_WAIT
tcp 0 0 localhost:www localhost:4311 TIME_WAIT
tcp 0 0 localhost:www localhost:4312 TIME_WAIT
tcp 0 0 localhost:www localhost:4313 TIME_WAIT
tcp 0 0 localhost:www localhost:4314 TIME_WAIT
tcp 0 0 localhost:www localhost:4315 TIME_WAIT
tcp 0 0 localhost:www localhost:4316 TIME_WAIT
tcp 0 0 localhost:www localhost:4317 TIME_WAIT
tcp 0 0 localhost:www localhost:4318 TIME_WAIT
tcp 0 0 localhost:www localhost:4319 TIME_WAIT
tcp 0 0 localhost:www localhost:4320 TIME_WAIT
tcp 0 0 localhost:www localhost:4321 TIME_WAIT
tcp 0 0 localhost:www localhost:4322 TIME_WAIT
tcp 0 0 localhost:www localhost:4323 TIME_WAIT
tcp 0 0 localhost:www localhost:4324 TIME_WAIT
tcp 0 0 localhost:www localhost:4325 TIME_WAIT
tcp 0 0 localhost:www localhost:4326 TIME_WAIT
tcp 0 0 localhost:www localhost:4327 TIME_WAIT
tcp 0 0 localhost:www localhost:4328 TIME_WAIT
tcp 0 0 localhost:www localhost:4329 TIME_WAIT
tcp 0 0 localhost:www localhost:4330 TIME_WAIT
tcp 0 0 localhost:www localhost:4331 TIME_WAIT
tcp 0 0 localhost:www localhost:4332 TIME_WAIT
tcp 0 0 localhost:www localhost:4333 TIME_WAIT
tcp 0 0 localhost:www localhost:4334 TIME_WAIT
tcp 0 0 localhost:www localhost:4335 TIME_WAIT
tcp 0 0 localhost:www localhost:4336 TIME_WAIT
tcp 0 0 localhost:www localhost:4337 TIME_WAIT
tcp 0 0 localhost:www localhost:4338 TIME_WAIT
tcp 0 0 localhost:www localhost:4339 TIME_WAIT
tcp 0 0 localhost:www localhost:4340 TIME_WAIT
tcp 0 0 localhost:www localhost:4341 TIME_WAIT
tcp 0 0 localhost:www localhost:4342 TIME_WAIT
tcp 0 0 localhost:www localhost:4343 TIME_WAIT
tcp 0 0 localhost:www localhost:4344 TIME_WAIT
tcp 0 0 localhost:www localhost:4345 TIME_WAIT
tcp 0 0 localhost:www localhost:4346 TIME_WAIT
tcp 0 0 localhost:www localhost:4347 TIME_WAIT
tcp 0 0 localhost:www localhost:4348 TIME_WAIT
tcp 96 0 k19_Martins1:31343 10.0.0.1:4326 CLOSE_WAIT
tcp 0 0 localhost:www localhost:4277 TIME_WAIT
tcp 0 0 localhost:www localhost:4278 TIME_WAIT
tcp 0 0 localhost:www localhost:4279 TIME_WAIT
tcp 0 0 localhost:www localhost:4280 TIME_WAIT
tcp 0 0 localhost:www localhost:4281 TIME_WAIT
tcp 0 0 localhost:www localhost:4282 TIME_WAIT
tcp 0 0 localhost:www localhost:4283 TIME_WAIT
tcp 0 0 localhost:www localhost:4284 TIME_WAIT
tcp 0 0 localhost:www localhost:4285 TIME_WAIT
tcp 0 0 localhost:www localhost:4286 TIME_WAIT
tcp 0 0 localhost:www localhost:4287 TIME_WAIT
tcp 96 0 k19_Martins1:31343 10.0.0.1:4430 CLOSE_WAIT
tcp 0 958 k19_Martins1:telnet 10.0.0.1:3840 ESTABLISHED
Active UNIX domain sockets (w/o servers)
Proto RefCnt Flags Type State I-Node Path
unix 3 [ ] STREAM CONNECTED 1085430 /tmp/.listen.camd.socket
unix 3 [ ] STREAM CONNECTED 1085429
unix 3 [ ] STREAM CONNECTED 3588
unix 3 [ ] STREAM CONNECTED 3587
unix 2 [ ] STREAM CONNECTED 3393 /tmp/gdaemon.socket13.(bug) enigma crashes on call http://DreamIP/cgi-bin/status from web-if when opened Transponder scan menu
fixed
but sometimes channels are aded to wrong satellite folder by "autoservices update"
bug fixes/features request dm500
and after that any position on diseqswich are reachable
version without using killer command - http://DreamIP/cgi-bin/status
(enigma crashes on call http://DreamIP/cgi-bin/status from web-if when opened Transponder scan menu)
in /cgi-bin/status were watched STANDBY status
now all info comes from /xml/streaminfo ("Service Reference"; "Service Name"; "Satellite"; "SNR"; "Lock")
and from /cgi-bin/selectAudio (current and available audio tracks)
new version:
now remembers last used audio track for any channel if isnt same as defaul set
#!/bin/sh
#
foo="$0"
crntNamePath=${foo%.*}
crntNameExt=${foo##*/}
crntNameShort=${crntNameExt%.*}
crntNameTxt="$crntNamePath".txt
#LOGFILE=/tmp/"$crntNameShort".log
WebIfFile=/tmp/"$crntNameShort".WebIF
rm -f $WebIfFile
LOGSTR="`date +%y.%m.%d.\ %H:%M:%S` $crntNameShort: -> "
crntpid=$$
echo $LOGSTR"STARTED - pid: $crntpid"
#echo $LOGSTR"STARTED - pid: $crntpid">"$LOGFILE"
#
# kill copyes of self
#
#pids=`pidof $crntNameExt| sed -e s/$crntpid//`
pids=`ps| grep $crntNameExt| grep -v grep| grep -v $$| sed -e 's/ [a-z].*$//g'`
if [ -n "$pids" ]; then
echo $LOGSTR"crntPid: $crntpid, pids to kill: $pids"
#echo $LOGSTR"pids to kill: $pids">>"$LOGFILE"
kill -9 $pids>/dev/null
fi
hex_to_dec () {
HexStrLen=`expr length $HexSTR`
HexStrPos=1
DEC=0
while [ "$HexStrLen" -ge "$HexStrPos" ]
do
DEC=$((DEC*16)) X0="0"
Hex1=`expr substr "$HexSTR" "$HexStrPos" 1`
case "$Hex1" in
[0-9]) X0="$Hex1";;
A|a) X0="10";;
B|b) X0="11";;
C|c) X0="12";;
D|d) X0="13";;
E|e) X0="14";;
F|f) X0="15";;
esac
DEC=$((DEC+X0*16))
HexStrPos=$((HexStrPos+1))
done
DEC=$((DEC/16))
}
#
# Web-IF Port Nummber
#
ConfigPATH="/var/tuxbox/config/enigma/config"
if [ ! -f "$ConfigPATH" ]; then
ConfigPATH="/etc/enigma/config"
if [ ! -f "$ConfigPATH" ]; then PortDec="80"; fi
fi
if [ ! $PortDec ]; then
PortHex=`grep 'webifport=' "$ConfigPATH"| sed -e 's/.*webifport=//'`
if [ ! $PortHex ]; then
PortDec="80"
else
HexSTR="$PortHex"
hex_to_dec
PortDec="$DEC"
fi
fi
#
# DreamBox PassWord
#
PSWFILE="/var/script/reload_emu_names.txt"
DOCMD="wget -O $WebIfFile -q http://root:"
DOCMD1="@localhost:$PortDec/cgi-bin"
if [ ! -e "$PSWFILE" ];then
LOCALPW="dreambox"
echo "$LOCALPW">"$PSWFILE"
else
LOCALPW=`cat -u "$PSWFILE"| head -1`
fi
current_Audio_LanguageAndTrack () {
$DOCMD$LOCALPW$DOCMD1/selectAudio
AudioLanguage=`grep "option selected value=" $WebIfFile| sed -e 's/.*selected value="//' -e 's/".*//'`
AudioTrack=`grep '" checked' $WebIfFile| sed -e 's/.*value="//' -e 's/".*//'`
}
cleanFromTxt () {
rm -f /tmp/"$crntNameShort".tmp
sed s/"$ServiceReference".*// $crntNameTxt| sed '/^$/d'>/tmp/"$crntNameShort".tmp
mv /tmp/"$crntNameShort".tmp "$crntNameTxt"
}
LastPmtMd5=""
LEFT="0" RIGHT="2"
if [ ! -f "$crntNameTxt" ]; then
echo "1:0:1:87a:4:56:320000:0:0:0: Track:$LEFT Language: TV1000 East 5E">>"$crntNameTxt"
echo "1:0:1:11f:1:1:322f4f:0:0:0: Track:$RIGHT Language: Travel 5E">>"$crntNameTxt"
echo "1:0:1:11f:1:1:32d080:0:0:0: Track:$RIGHT Language: Travel 5E">>"$crntNameTxt"
echo "1:0:1:c9:2:46:fff60000:0:0:0: Track:$LEFT Language:0x0191 NGC 1W">>"$crntNameTxt"
fi
#
# start
#
while true
do
LOGSTR="`date +%y.%m.%d.\ %H:%M:%S` $crntNameShort: -> "
if [ ! -f /tmp/pmt.tmp ]; then
PmtMd5="0"
else
PmtMd5=`md5sum /tmp/pmt.tmp| awk {'print $1'}`
fi
if [ ! "$PmtMd5" = "0" ]; then
if [ "$PmtMd5" = "$LastPmtMd5" ]; then
current_Audio_LanguageAndTrack
#$DOCMD$LOCALPW$DOCMD1/openSI
$DOCMD$LOCALPW@localhost:$PortDec/xml/streaminfo
SNR=`grep "<snr>" $WebIfFile| sed -e 's/.*<snr>//'| sed -e 's/%.*//'`
if [ "$SNR" -lt "75" ]; then WeakSignal="1"; fi
if [ ! "$AudioLanguage" ] || [ ! "$AudioTrack" ] || [ "$AudioLanguage" = "$AudioLanguage0" -a "$AudioTrack" = "$AudioTrack0" ]; then
sleep 1
else
echo $LOGSTR"audio track is changed from: $AudioLanguage0 $AudioTrack0 to: $AudioLanguage $AudioTrack"
if [ "$WeakSignal" = "1" -a "$AudioTrack" = "1" ]; then
echo $LOGSTR"skip SAVE cause weak signal were presented"
else
ChNAME=`grep "<name>" $WebIfFile| sed -e 's/.*<name>//'| sed -e 's/<.*//'`
ServiceReference0=`grep "<reference>" $WebIfFile| sed -e 's/.*<reference>//'| sed -e 's/<.*//'`
if [ "$ServiceReference0" = "$ServiceReference" ]; then
if [ "$AudioLanguage" = "$AudioLanguage0" ]; then
SaveSTR=""
else
SaveSTR="$AudioLanguage"
fi
SaveSTR="$ServiceReference Track:$AudioTrack Language:$SaveSTR $ChNAME"
cleanFromTxt
echo "$SaveSTR">>"$crntNameTxt"
fi
fi
AudioLanguage0="$AudioLanguage" AudioTrack0="$AudioTrack"
fi
else
LastPmtMd5="$PmtMd5" SetAudio="Z" WeakSignal="0"
$DOCMD$LOCALPW$DOCMD1/status
ServiceReference=`grep "service reference:</td><td>" $WebIfFile| tail -1| sed -e 's/.*<td>//' -e 's/<.*//'`
echo $LOGSTR"channel is changed $ServiceReference"
echo $ServiceReference>/tmp/"$crntNameShort".LastChannel
current_Audio_LanguageAndTrack
SAVED_Audio_LanguageAndTrack=`grep "$ServiceReference" "$crntNameTxt"| sed -e 's/""$ServiceReferenc""//'`
if [ ! "$SAVED_Audio_LanguageAndTrack" ]; then
echo $LOGSTR"use default LanguageAndTrack: $AudioLanguage $AudioTrack"
AudioLanguage0="$AudioLanguage" AudioTrack0="$AudioTrack"
else
AudioLanguage0=${SAVED_Audio_LanguageAndTrack#*Language:}
AudioLanguage0=${AudioLanguage0%% *}
AudioTrack0=${SAVED_Audio_LanguageAndTrack#*Track:}
AudioTrack0=${AudioTrack0%% *}
if [ "$AudioLanguage0" = "$AudioLanguage" -o "$AudioLanguage0" = "" ] && [ "$AudioTrack0" = "$AudioTrack" -a "$AudioTrack" = "1" ]; then
cleanFromTxt
AudioLanguage0="$AudioLanguage"
echo $LOGSTR"clean from list cause same as default LanguageAndTrack: $AudioLanguage $AudioTrack"
else
if [ ! "$AudioLanguage0" = "" ]; then
SetAudio="&language=$AudioLanguage0"
else
SetAudio=""
AudioLanguage0="$AudioLanguage"
fi
SetAudio="$AudioTrack0$SetAudio"
fi
fi
if [ ! "$SetAudio" = "Z" ]; then
$DOCMD$LOCALPW$DOCMD1/setAudio?channel=$SetAudio
echo $LOGSTR"change audio track: channel=$SetAudio"
fi
fi
fi
donehave few times asked for feature which able to save Left/Right adio track for some channels in Audio menu, but havevent heard by DMM and IHaD teams
(that feature have other image more than year, but i dont like move to image cause one feature)
i have made script which does switching for defined channels (of corse without Save ability from Audio menu):
chmod 755 /var/script/SetAudio_Left-Right_userscript.sh
#!/bin/sh
#
foo="$0"
crntname=${foo##*/}
#LOGFILE=/tmp/"$crntname".log
WebIfFile=/tmp/"$crntname".WebIF
rm -f $WebIfFile
LOGSTR="`date +%y.%m.%d.\ %H:%M:%S` $crntname: -> "
crntpid=$$
echo $LOGSTR"STARTED - pid: $crntpid"
#echo $LOGSTR"STARTED - pid: $crntpid">"$LOGFILE"
#
# kill copyes of self
#
#pids=`pidof $crntname| sed -e s/$crntpid//`
#pids=`ps ax| grep $crntname| grep -v grep| grep -v $$| sed -e 's/ [a-z].*$//g'`
pids=`ps| grep $crntname| grep -v grep| grep -v $$| sed -e 's/ [a-z].*$//g'`
if [ -n "$pids" ];then
#echo $LOGSTR"pids to kill: $pids"
#echo $LOGSTR"pids to kill: $pids">>"$LOGFILE"
kill -9 $pids>/dev/null
fi
hex_to_dec () {
HexStrLen=`expr length $HexSTR`
HexStrPos=1
DEC=0
while [ "$HexStrLen" -ge "$HexStrPos" ]
do
DEC=$((DEC*16)) X0="0"
Hex1=`expr substr "$HexSTR" "$HexStrPos" 1`
case "$Hex1" in
[0-9]) X0="$Hex1";;
A|a) X0="10";;
B|b) X0="11";;
C|c) X0="12";;
D|d) X0="13";;
E|e) X0="14";;
F|f) X0="15";;
esac
DEC=$((DEC+X0*16))
HexStrPos=$((HexStrPos+1))
done
DEC=$((DEC/16))
}
ConfigPATH="/var/tuxbox/config/enigma/config"
if [ ! -f "$ConfigPATH" ]; then
ConfigPATH="/etc/enigma/config"
if [ ! -f "$ConfigPATH" ]; then PortDec="80"; fi
fi
if [ ! $PortDec ]; then
PortHex=`grep 'webifport=' "$ConfigPATH"| sed -e 's/.*webifport=//'`
if [ ! $PortHex ]; then
PortDec="80"
else
HexSTR="$PortHex"
hex_to_dec
PortDec="$DEC"
fi
fi
#
LastPmtMd5=""
LEFT="0" RIGHT="2"
PSWFILE="/var/script/reload_emu_names.txt"
DOCMD="wget -O $WebIfFile -q http://root:"
DOCMD1="@localhost:$PortDec/cgi-bin"
#end
if [ ! -e "$PSWFILE" ];then
LOCALPW="dreambox"
echo "$LOCALPW">"$PSWFILE"
else
LOCALPW=`cat -u "$PSWFILE"| head -1`
fi
# start
while true
do
LOGSTR="`date +%y.%m.%d.\ %H:%M:%S` $crntname: -> "
if [ ! -f /tmp/pmt.tmp ]; then
PmtMd5="0"
else
PmtMd5=`md5sum /tmp/pmt.tmp| awk {'print $1'}`
fi
if [ "$PmtMd5" = "$LastPmtMd5" ]; then
sleep 1
else
LastPmtMd5="$PmtMd5" SetAudio="Z"
$DOCMD$LOCALPW$DOCMD1/status
ServiceReference=`grep "service reference:</td><td>" $WebIfFile| tail -1| sed -e 's/.*<\/td><td>//' -e 's/<\/td><\/tr>//'`
echo $LOGSTR"channel is changed $ServiceReference"
echo $ServiceReference>/tmp/"$crntname".LastChannel
case "$ServiceReference" in
# TV1000 East 5E: set russian
1:0:1:87a:4:56:320000:0:0:0:) SetAudio="$LEFT";;
# Travel 5E: set russian
1:0:1:11f:1:1:322f4f:0:0:0:) SetAudio="$RIGHT";;
# NGC 1W: set english
1:0:1:c9:2:46:fff60000:0:0:0:) SetAudio="$LEFT""&language=0x0191";;
esac
if [ ! "$SetAudio" = "Z" ]; then
$DOCMD$LOCALPW$DOCMD1/setAudio?channel=$SetAudio
echo $LOGSTR"change audio track: channel=$SetAudio"
fi
fi
done
litle ReadMe:
if password on dream isnt 'dreambox' then type it in file /var/script/reload_emu_names.txt