Beiträge von max95100

    The problem is that they will not advise him, because they do not officially support these boxes. But there is an openATV image on the Internet that was converted by someone, unfortunately I tried it, it was not stable and it did not have a good translation. But I uploaded the original image without any problems, maybe my upload wasn't that invasive and he didn't have to do anything like that.


    1. held down the power button until the orange LED came on.


    2. I logged in to the browser with the IP address of the box


    3. I have loaded the original image


    and was it not possible to give such advice immediately? or create a thread that describes what to do in such cases. (if it already exists, pin it on that it is easily available) then people would not ask stupid questions, and maybe not all


    the only fully working image on the new dreamboxes is the dreambox os

    It seems to me that we deviated a bit from the topic of the post.

    the author wanted to get help because he blocked his tuner by uploading an unauthorized soft. And in the earlier comments he was criticized that he uploaded unauthorized soft. I just wanted to defend the author of the post. Unfortunately, people switch to dreambox and proceed as with the previous cheaper boxes that they had and in which they uploaded the image of a given forum and had everything installed right away. unfortunately the forums they are used to do not support new dreamboxes.

    I personally did not like the dream elite (although skurkę has a nice, only not readable) or even more gp 4.1.

    that's why I'm patient, I set an original picture to my needs, and so far I'm happy with dm one. It has a few things that didn't work on my previous boxes

    DP should really do something new regarding their god-awfull skins… True…

    you might laugh at me, but I like the look of the default skin. Worse with its matching, in the Metrix skin on openATV, you can set the color and more importantly, you can set how many channel positions are displayed in the channel list

    Hi in my opinion it would be useful to improve the functionality of the radio

    There are radio channels that broadcast several stations on different audio tracks on one frequency, continuous display of the OSD in radio mode prevents the selection of an audio track.

    I understand that entering the radio mode through the menu is caused by the lack of the Radio/TV button on the remote control. And this is a good solution.

    Would it be possible for the OSD to disappear after selecting a radio channel from the list? as is the case in TV mode.

    And the return to TV mode to be analogous, i.e. Menu -> TV

    Hi everybody. After flashing my dreambox one with openatv 6.4. It doesn’t start black screen and red led blinking this is what i have. Now i need the original bootloader to burn it on a sdcard and try with putty to log. If there is any efficient solution please i’m taking it. Regards

    How do you hold down the power button while turning it on, it turns on an orange LED?


    And it is too much trouble to ask in the OpenATV forum?

    This is exactly why you should NOT run foreign firmware on a Dreambox… What does OpenATV offer extra over a Dream firmware??

    rather getting used to the image that was used for several years on earlier receivers. Personally, I experienced a shock myself when I switched to DM one. But I managed to set what I care about and now I like the minimalism of the original image

    I'm sorry I'm writing here, and I'm not starting a new thread. But maybe someone will enlighten me with one entry, so maybe a new topic will be superfluous.

    does dreambox one support Hbbtv 2.0.2?

    In my country, several stations are already broadcasting hbbtv, Mostly on the DVB-T. Mostly it works correctly.

    but there are also stations where the graphics are slowly loaded (I suspect that because of its size) (Polsat)

    And live TV not working (TVP)

    Will it be possible to count on hbbtv corrections in the future?

    Can you please refine the radio function in oe 2.6?

    It is good that you can enter the radio stations from the menu, because the remote control does not have a radio button. But it is a pity that you can not disable the OSD.

    1. In the background you can see the wallpaper that is obscured by the OSD

    2. there are radio channels that broadcast more stations under other soundtracks, unfortunately with OSD enabled you can not change the audio track

    During the weekend I returned to the original dreambox os from the dreambox website. Before, I had newnigma2. I do not know if it is a matter of the image or the default skin in this image, but I moved the picons after installing dreambox os and the VIVA picon is showing normally, in the default skin on newnigma2 it did not work.

    manuel way:

    - copy picon picture to picon path

    - change picon name to the same channel service name

    #SERVICE 4097:0:1:0:0:0:0:0:0:0:http%3a//stream.tvkujawy.pl%3a8080/live/broadcast.m3u8:PL

    picon name: 4097_0_1_0_0_0_0_0_0_0.png

    Can picons be assigned in 8739 ??

    I tried to do that yesterday, unfortunately the VIVA picons did not load me

    yes

    "8739 is the new streamservice on Dreambox One and Two, used for HLS, DASH playback and also DRM, as replacement for the crappy GSteamer HLS and DASH support"


    but if your dreambox two works this link on 4097 is probably also for me :thinking_face:


    P.S.

    I played with other "lighter" local TV links from my country, added them using dreamboxedit and it worked for me in any mode.

    A VIVA link only in 8739 :sleeping_face:


    Maybe a bit of a stupid question, but how can I still extract the sender's reference to be able to assign picone to VIVA? I usually did it using dreamboxedit, but for obvious reasons it is known that I will not be able to :grinning_squinting_face:

    The problem is that on none of these three modes available in dreamboxedit does not work for me link VIVA in dreambox one

    1 = DVB <- First, I see the same message as in other modes (connecting... Nie można odnaleźć typu mediów "Media type cannot be found") after a while this message changes to (tuning... Brak danych na transponderze (Koniec czasu czytania PAT) "No data on the transpoder (End of PAT reading time)") But it shouldn't work on that


    4097= non-DVB compliant stream <- I see the same message as in other modes (connecting... Nie można odnaleźć typu mediów "Media type cannot be found") and nothing else happens. In this mode I work this link on other boxes, so it should be correct.


    8193 = eServiceURI <-I see the same message as in other modes (connecting... Nie można odnaleźć typu mediów "Media type cannot be found") and nothing else happens


    only the VIVY link will work for me when I do as "onlydb" said, that is, I will use the fourth mode, which is not supportable by dreamboxedit


    8739 is the new streamservice on Dreambox One and Two, used for HLS, DASH playback and also DRM, as replacement for the crappy GSteamer HLS and DASH support


    Just out of curiosity I wonder why the dreambox one does not work for me mode "4097= non-DVB compliant stream

    - Isn't this mode supported in dreamOS oe 2.6?

    - Or maybe I don't have some gstrreamer ingredient installed?


    :thinking_face::thinking_face::thinking_face::thinking_face::thinking_face:

    Thanks

    That's what I meant :smiling_face:

    Stream worked without installing ffmpeg proxy

    only I had to change 4097 to 8739, because 4097 did not want to work.


    Now the entry looks similar to colleague Myshel's.

    I do not know why dreambox edit removed it. Dreambox edit I downloaded a few days ago so it should not be old.

    I did not know that you can edit the list of channels in the browser. I don't need Dreamboxedit anymore. :smiling_face:



    not work????????

    You cannot add this entry to a bouquet without DreamboxEdit ???? :loudly_crying_face:

    I'm sorry, but I'm using the dreambox only for the third month, On my previous boxes, I used dreamboxedit to upload a list of channels instead of manually flipping the list over FTP.




    You are a little bit late - text editors were inventend in the 60s of the last century. :winking_face:


    But now you can check if your Octagon can start Streams via a web proxy in another country :grinning_squinting_face:

    I've never used web proxy on Octagon, Because I didn't have such a need.

    I appreciate your contribution to the dreambox community and its software.

    In the dreambox I like this minimalism of the factory firmware, unfortunately in the factory plugins gutemine lack. I know you can install it through the blue panel in GP4.1 or DEP, no offense but then you get a dumpster out of the software, and I don't want to do it.

    So I did something that I usually did on other tuners when something didn't work for me, i.e. I uploaded an image of another community. (in newniga2 also lack gutemine in plugins, so I asked a question on their forum.) However, it was a mistake, because there is no other community... I spent a few hours yesterday checking other image and the only working image on dreambox one is dreambox OS.


    In my country, the dreambox brand has not enjoyed a good reputation for a long time. When buying a dreambox one I was aware that in case of problems I will not receive support on any native forum. Despite this, I wanted to try, learn something new. Even if I have to look for support on foreign forums and even support myself with a translator. Because it is not the octagon, zgemma or VU + that I associate with the Enigma but the dreambox. which a few years ago I wanted to have and get to know him.

    In some ways, using the dreambox OS is different from using openATV EGAMI GraterliOS or Hyperion that I have dealt with so far. Therefore, do not laugh that I do not know something or I can not :smiling_face_with_halo:

    As I wrote, only this entry did not work:

    #SERVICE 8739:0:1:0:0:0:0:0:0:0:https%3a//stream.funcontent.ru/hls/vivarussia/index.m3u8:Канал 0

    #DESCRIPTION Канал 0

    (which means 8739?)


    This one works:

    #SERVICE 1:0:0:0:0:0:0:0:0:0:http%3a//127.0.0.1%3a2209/https%3a//stream.funcontent.ru/hls/vivarussia/index.m3u8:viva TV via ffmpeg-proxy

    (I just do not understand why before the correct link to m3u8 I must have given: "http://127.0.0.1:2209/" without it even with installed ffmpeg-proxy I did not want to act. )



    But anyway I had to install ffmpeg-proxy, hence my surprise that that this is not part of the image. So you can expect a ffmpeg-proxy in the future in the official image? :smiling_face:

    wonder if I will be able to stream such a thing further...

    On my earlier box I had a few iptv channels on the list, but only VIVA received me during the stream on KODI

    It plays nicely with ffmpeg-proxy on my Dreambox two :face_with_tongue:


    And we don't like advertising other boxes :thumbs_down:

    Sorry, it wasn't meant to be an advertisement. I just wanted to emphasize that the link works and is properly added to the list, and that I have no other dreambox fell on that box :face_with_tongue:



    This will work for Dreambox One

    #SERVICE 8739:0:1:0:0:0:0:0:0:0:https%3a//stream.funcontent.ru/hls/vivarussia/index.m3u8:Канал 0

    #DESCRIPTION Канал 0


    After adding this entry in "userbouquet.favourites", dreamboxedit shows an error and removes this entry for me.

    Hi,


    mit dem ffmpeg-proxy von gutemine läuft der Stream auf der ONE, mit dem Eintrag "#SERVICE 1:0:0:0:0:0:0:0:0:0:http%3a//127.0.0.1%3a2209/https%3a//stream.funcontent.ru/hls/vivarussia/index.m3u8:viva TV via ffmpeg-proxy" in die "userbouquet.favourites.tv" .

    Here the error does not show me and does not delete me this entry

    how can I install ffmpeg-proxy on the original image?

    Why isn't it in the image by default?

    I looked in and as I wrote, the remote does not automatically search for the projector's remote code. I am also unable to enter the code manually, because my projector is Chinese no name. The only thing that saves me is the possibility of teaching the remote control buttons from the original remote control (some remotes have such a function), so I asked if there was any possibility.