zombi what is difference between Gemini Bootmanager version 0.2 and 2.01. Why it don't boot from Android to Enigma2 with me.

<map context="InfobarInstantRecord">

<key id="KEY_RED" mapto="instantRecord" flags="b" />

<key id="KEY_RECORD" mapto="instantRecord" flags="b" />

</map>

<!-- color butoon setup at InfobarActions -->

<map context="InfobarInstantRecord2">

<device name="dreambox advanced remote control (native)">

<key id="KEY_RECORD" mapto="instantRecord" flags="b" />

<!-- this breaks timeshift end!!! key id="KEY_STOP" mapto="instantRecord" flags="m" /-->

</device>

<device name="dreambox ir keyboard">

<key id="KEY_RECORD" mapto="instantRecord" flags="m" />

</device>

<device name="dreambox remote control (native)">

<key id="KEY_RED" mapto="instantRecord" flags="b" />

</device>

<device name="compatible: pcKeyboard">

<key id="KEY_F12" mapto="instantRecord" flags="b" />

</device>

<key id="KEY_RED" mapto="instantRecord" flags="l" />

</map>

<map context="InfobarHbbtvActions">

<key id="KEY_RED" mapto="hbbtvAutostart" flags="l" />

<device name="compatible: pcKeyboard">

<key id="KEY_F1" mapto="hbbtvAutostart" flags="b" />

</device>

</map>

<map context="InfobarAudioSelectionActions">

<device name="compatible: pcKeyboard">

<key id="KEY_F7" mapto="audioSelection" flags="m" />

</device>

<device name="dreambox remote control (native)">

<key id="KEY_AUDIO" mapto="audioSelection" flags="m" />

</device>

<device name="dreambox ir keyboard">

<key id="KEY_AUDIO" mapto="audioSelection" flags="m" />

</device>

<device name="dreambox advanced remote control (native)">

<key id="KEY_AUDIO" mapto="audioSelection" flags="m" />

</device>

<key id="KEY_GREEN" mapto="audioSelection" flags="b" />

</map>

<map context="InfobarSubserviceSelectionActions">

<device name="compatible: pcKeyboard">

<key id="KEY_F2" mapto="subserviceSelection" flags="b" />

</device>

<key id="KEY_GREEN" mapto="subserviceSelection" flags="l" />

</map>

<map context="InfobarActions">

<!-- Red button -->

<key id="KEY_RED" mapto="instantRecord" flags="m" />

<key id="KEY_RED" mapto="openTimerList" flags="l" />

<!-- Green button -->

<key id="KEY_GREEN" mapto="audioSelection" flags="m" />

<key id="KEY_GREEN" mapto="subtitleSelection" flags="l" />

<!-- Yellow button -->

<key id="KEY_YELLOW" mapto="showEventList" flags="m" />

<key id="KEY_YELLOW" mapto="openMultiEPG" flags="l" />

<!-- Blue button -->

<key id="KEY_BLUE" mapto="openExtensions" flags="m" />

<key id="KEY_BLUE" mapto="openPluginBrowser" flags="l" />

<key id="KEY_VIDEO" mapto="showMovies" flags="m" />

<key id="KEY_RADIO" mapto="showRadio" flags="m" />

<key id="KEY_TV" mapto="showTv" flags="m" />

</map>

Hi experts,

Firmware upload

         [*] Mounting '/dev/ubi0_0' to '/mnt'
sed: /mnt/etc/shadow: No such file or directory
[*] Unmounting '/mnt'

Flash problem, Suggest solution.

Regards

Quote from Fred Bogus Trumper

Create a partition with an ext or FAT filesystem labeled as "DREAMFLASH" on the USB device

Than copy the imagefile to the device and rename it, if necessary, to dreambox-image-dm520.tar.xz

Plugin the device and reboot the dreambox

Hi, thanks for sharing this information.

I have successfully flashed various images on dm520. Also guided the other dm users.

But now this DREAMFLASH method is not working on my dm520, anymore.

Need your guidance.

Regards

Quote from kamsat10

I reply to myself:
yes it is possible but only in rescue mode which autoflashd daemon is running and the image name should be in this format, "dreambox-image-dm920.tar.xz" for dm920 box.

Hi, thanks for sharing this information.

I have successfully flashed various images on dm520. Also guided the other dm users.

But now this DREAMFLASH method is not working on my dm520, anymore.

Need your guidance.

Here's is easy method to Flash any Image on Dreambox (DM520, DM900 and DM920 etc), without Internet Connection. I explain here for DM520

1- Format USB with Fat-32

2- USB label " DREAMFLASH "

3- Copy image to USB Drive

4- Rename image " dreambox-image-dm520.tar.xz "

5 Insert USB to receiver

6 Now from standby menu select Recovery Mode

or Shut Down your receiver and then press and hold touch button of receiver

or from telnet give any one of below commands

to-the-rescue

or

echo "rescue" >> / proc / stb / fp / boot_mode

reboot

Note: If receiver is on red light then first power off your receiver from rocker switch.

Then power on your receiver and touch and hold front touch panel within 500 ms to bring receiver into Rescue Mode

I think there is need for updatatin of rescue.

Before I have several time flashed image through the method given in the link below.

Post

RE: easy method to flash rescue on DM520

Here's is easy method to Flash any Image on Dreambox (DM520, DM900 and DM920 etc), without Internet Connection. I explain here for DM520


1- Format USB with Fat-32
2- USB label " DREAMFLASH "
3- Copy image to USB Drive
4- Rename image " dreambox-image-dm520.tar.xz "
5 Insert USB to receiver
6 Now from standby menu select Recovery Mode
or Shut Down your receiver and then press and hold touch button of receiver
or from telnet give any one of below commands


to-the-rescue
or
echo "rescue" >> / proc / stb / fp…

athart

Nov 3rd 2021

Quote from Fred Bogus Trumper

please to not open a new Thread for the same problem

could you please provide a bootlog first?

it's also possible to flash the box via USB

if this does not work you can start the rescue loader manually when booted to the bold bios to flash the box via WebInterface

@mods

please merge this Thread to Rescue Mode_Waiting for DHCP

Display More

I don't have ethernet connection to Dreambox. Only through wifi I can connect.

It would be great, if you share method / link to flash image from USB or /tmp folder by telnet command.

Through Telnet I have flashed its rescue image.

Hi experts

Kindly guide, is there any command to flash any image (saved in USB or in /tmp folder of receiver) on Dreambox through telnet command.

Regards

Hi experts,

I have successfully installed several times through USB, MD image on dm520. .

But since morning it shows below message.

Rescue Mode

Waiting for DHCP.

Kindly suggest solution how to move forward. As I don't have ethernet connection and on restart dm520 only flashes red, don't show screen.

Regards.

Quote from AlBundy00

I already asked: Which image are you trying to flash?

No answer!

athart gives you a step by step.

No reaction.

What do want?

Are you going to tell us that you cannot flash 4 DM525 with the official image? Why do you even want to flash them?

And again: What image are you trying?

Display More

As already mentioned in above post. You can flash any image of your choice. Before flash just rename it " dreambox-image-dm520.tar.xz ".

Quote from Ahmed habib

Code

[*] Removing volume 0 from /dev/ubi0
[*] Creating volume 0 on /dev/ubi0 (dreambox-rootfs)
Set volume size to 503078912
Volume ID 0, size 3962 LEBs (503078912 bytes, 479.8 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "dreambox-rootfs", alignment 1
[*] Creating ubifs filesystem on /dev/ubi0_0
[*] Mounting '/dev/ubi0_0' to '/mnt'
[*] Extracting '/tmp/8oykWw' to '/mnt'
Segmentation fault
Fatal: Failed to extract root filesystem
tar: short write

---

1/ TRIED ONLINE RECOVERY ----

2/ TRIED MANY IMAGES AND BACKUP

Here's is easy method to Flash any Image on Dreambox (DM520, DM900 and DM920 etc), without Internet Connection. I explain here for DM520

1- Format USB with Fat-32

2- USB label " DREAMFLASH "

3- Copy image to USB Drive

4- Rename image " dreambox-image-dm520.tar.xz "

5 Insert USB to receiver

6 Now from standby menu select Recovery Mode

or Shut Down your receiver and then press and hold touch button of receiver

or from telnet give any one of below commands

to-the-rescue

or

echo "rescue" >> / proc / stb / fp / boot_mode

reboot

Note: If receiver is on red light then first power off your receiver from rocker switch.

Then power on your receiver and touch and hold front touch panel within 500 ms to bring receiver into Rescue Mode

Quote from mimisiku

Really?? A DM800HD-PVR… He has had a good run for his money. Trash it and buy something new….

This forum is only for new Dreambox boxes

Dear Members

If anyone has gRabber plugins for dm520, kindly share download able link here.

Pressing 0 only hides gutemine from plugin menu.

But it is still available in Setup Menu, and WebControl screen.

.

Will it not affect SvenH and his plugins already installed in my dm.

Dear Experts,

I have no more use of officially retired gutemine, but I use SvenH Advanced QuickButton.

I don't like to see officially retired logo in my dm520. Therefore kindly suggest how to delete gutemine but keep SvenH in my dm.

Thanks

Myshel, I did so, to reduce infobar height.