Hi,
Yes, the IP address appeared on the both displays of TV and the DM900 but again i could not connect to the box.
In the end i found what was the problem. I used microsoft explorer browser on windows 10 to connect to the box and it was the problem. After changing the browser from microsoft explorer to microsoft edge then i could connect without problem to the box. It looked like that there was some comply problem with microsoft explorer and the DM900.

Hi
I have a problem to flash my dm900
it can go to rescue mode but can not install new image. it can not connect t the IP address which appear in display in rescue mode. any help?
thanks

Okay. thanks. updated

why?

Hello,
thank you all for your support
the problem was in my connection to the router. when DM900 connected to router by WIFI then it will not show your IP address. i connected my DM900 via cable to the router and it showed me the IP address. maybe someone will face a same issue so here i put the command to write it in the PUTTY telnet. the commands are as follows:
Code
1.wget http://www.dreamboxupdate.com/….14-r0-dm900-20170113.bin
2.flash-rescue zImage-rescue-3.14-r0-dm900-20170113.bin
3. apt-get update && update-rescue -v

1 - first type first command (wget http://www.dreamboxupdate.com/….14-r0-dm900-20170113.bin)

the message you should get:
opendreambox 2.5.0

dm900

the login name will be root and you should not write anything as password

dm900 login: root
Password:
root@
you should type cd /tmp
dm900:~# cd /tmp
root@
2 - second type: flash-rescue zImage-rescue-3.14-r0-dm900-20170113.bin
dm900:/tmp# flash-rescue zImage-rescue-3.14-r0-dm900-20161208.bin
Manufacturer ID: c2
Memory type : 20
Memory density : 19
read id ok
comparing 2781 sectors...
erasing 2779 sectors...
writing 44464 pages...
verifying 2779 sectors...
flash done
root@
and last the 3-rd command:
3. apt-get update && update-rescue -v

now I went again to rescue mode. its writing me rescue mode, waiting for DHCP
when I write http://DM900 in my pc browser I get nothing. what should I do now?
thanks

Hi,
thanks for help. I did it and I got this message.(attached file) now can I go to rescue mode to check?

ok, I know that I can get the DM900 IP from the router, but what then? could you please write me the process? how can I update the rescue loader?
I think I should download (zImage-rescue-3.14-r0-dm900-20170530.bin) to the box but I don't know how to do it!
I can not communicate with my DM900, even when I have the DM900 IP.

Could you please inform me how? this is the first time im working with dream box. when I put the box on rescue mode then I can not connect the box to htttp://DM900!
thanks

Hi,
I have a problem with my new DM900. when I put the box in rescue mode it does not show the IP address under the rescue mode therefore I can not do any flashing. could someone help me? for your information I switched on and off the DHCP but useless, and nothing has been changed. is there anything in the DM900 setting which should be changed?
thanks