Beiträge von lachtan

    Es tut mir leid, dass ich über DM900 mit FBC-Tuner schreibe.

    Hoher Durchfluss im Modul aktiviert, aber jetzt werden viele Programme ohne das Modul ausgeführt. Während ich schrieb, fällt das Bild auseinander. Unsichtbar.


    I'm sorry I'm writing about DM900 with FBC tuner.

    High flow enabled in the module, but now it's one that many programs run without the module. As I wrote the picture is falling apart. Unseen.

    Nothing is solved.

    DM has a limit of 89 Mg which is the whole problem The armchair has a bandwidth of 110 or 115 Mg.

    Now I don't know exactly, so when you run the program, the image falls apart like a rubik's cube.

    VU + had the same problem, but there the developers responded to modified the driver and there are problems with VU +. Here one begs, but without effect.


    Nichts ist gelöst.

    DM hat eine Grenze von 89 Mg, was das ganze Problem ist. Der Sessel hat eine Bandbreite von 110 oder 115 Mg.

    Jetzt weiß ich es nicht genau. Wenn Sie das Programm ausführen, fällt das Bild wie ein Zauberwürfel auseinander.

    VU + hatte das gleiche Problem, aber dort reagierten die Entwickler auf die Änderung des Treibers und es gibt Probleme mit VU +. Hier bittet man, aber ohne Wirkung.

    Yes we did

    But if they are now sending FAT so many people do not have a module and where should they allow it? When this option is not in the receiver.


    It broadcasts a few programs that are still FAT.

    Today's trend drives satellite platforms to savings and therefore resort to high bit rates. flows.


    They work without problems on other receivers.

    Why couldn't they work without problems on a receiver like Dreambox?


    I will add more thanks for your time.

    If there is a possibility to solve this problem at the receiver we will be happy.

    So we finally figured it out

    Ci module pulled out of the receiver despite the fact that the platform is now not decoding the missing menu item in the receiver that would allow high bit support. flow.

    Incredibly

    If the module is inserted again into the receiver all OK

    If platforms that transmit on high bit rate frequencies. unfortunately it is not possible to enable the flow in DM.

    At 30 W this is now an example broadcast by FAT but DM must have a Ci module where high bit support is set. flow.

    Yes now they broadcast freely. At least a week later, the encoding will be re-introduced.


    Please if you have a motor and 30W rewind option and search the frequency you will see for yourself what it does. Receivers for 50 to 100 euros have no problems here. DM not applicable

    So unfortunately

    It's still the same please support for viewing and repair.

    We compared with more colleagues who own DM900 we all have the same problem. other receivers on the frequencies play without problems.


    If I run the VLC stream on my Notebook, the cubes on the notebook and TV will stop. At the moment of turning off the stream immediately on the television cubes decay image.

    Again tested on multiple DM 900 receivers

    We test three people with DM 900

    Good day


    DM 900 does not handle high frequency data flow at 30 ° W Hispasat 30W-4, Hispasat 30W-5, Hispasat 30W-6


    these are frequencies

    11.731 V 30000 5/6 DVB-S2 8PSK

    11.771 V 30000 5/6 DVB-S2 8PSK

    11.811 V 30000 5/6 DVB-S2 8PSK

    11.891 V 30000 5/6 DVB-S2 8PSK

    11.931 V 30000 5/6 DVB-S2 8PSK


    Now you can fix about a week here will be free broadcasting.

    frequencies here have a bit rate of 74 MB.

    Please look at and fix it so that the programs that broadcast on these frequencies do not break down. Thank you very much in advance.



    Perhaps I have already created the right thread

    DE

    ahoj


    DM 900 nezpracovává vysoké toky dat při 30 ° W Hispasat 30W-4, Hispasat 30W-5, Hispasat 30W-6


    to jsou frekvence


    11,731 V 30000 5/6 DVB-S2 8PSK


    11,771 V 30000 5/6 DVB-S2 8PSK


    11,811 V 30000 5/6 DVB-S2 8PSK


    11 891 V 30000 5/6 DVB-S2 8PSK


    11 931 V 30000 5/6 DVB-S2 8PSK


    Nyní lze bezplatné vysílání nastavit na jeden týden.


    Myslím, že frekvence tu mají bitovou rychlost 74 MB, a tak drahý přijímač nedokáže stimulovat stimulaci? Opravte jej, aby se programy, které vysílají na těchto frekvencích, nerozpadly.



    Spojené království


    Dobrý den


    DM 900 nezpracovává vysoké toky dat při 30 ° W Hispasat 30W-4, Hispasat 30W-5, Hispasat 30W-6


    to jsou frekvence


    11,731 V 30000 5/6 DVB-S2 8PSK


    11,771 V 30000 5/6 DVB-S2 8PSK


    11,811 V 30000 5/6 DVB-S2 8PSK


    11 891 V 30000 5/6 DVB-S2 8PSK


    11 931 V 30000 5/6 DVB-S2 8PSK


    Nyní lze bezplatné vysílání fixovat na jeden týden.


    I think the frequencies here have 74 MB bitrate and so expensive receiver can't handle the stim? Please fix it so that the programs that broadcast on these frequencies do not disintegrate.



    Cz


    Dobrý den


    DM 900 nezvládá vysoké datové toky na 30°W Hispasat 30W-4, Hispasat 30W-5, Hispasat 30W-6


    jedná se o frekvence


    11,731 V 30000 5/6 DVB-S2 8PSK


    11,771 V 30000 5/6 DVB-S2 8PSK


    11,811 V 30000 5/6 DVB-S2 8PSK


    11,891 V 30000 5/6 DVB-S2 8PSK


    11,931 V 30000 5/6 DVB-S2 8PSK


    Nyní lze opravit volné vysílání přiblyžně jeden týden.


    frekvence zde mají tuším datový tok 74 MB a tak drahý přijímač si stim neporadí ? Prosím je možné opravit, aby se nerozpadávali programy , které na těchto frekvencích vysílají .


    Cvičení

    Kann mir jemand einen Link zum neuesten Treiber für DM900 geben?
    Vielen Dank für Ihre Bereitschaft.
    Sundtek MediaTV Digitales Heimkino III (DVB-C / T / T2)


    Please can someone give me a link to the latest driver for DM900?
    Thank you very much for your willingness.
    Sundtek MediaTV Digital Home Theater III (DVB-C / T / T2)

    Just let me know before updating the module at least decoded the 11410H after updating the problem even there.
    So if the developers were trying to figure out what they were doing there and repair the remaining frequencies as the first one.


    Lass es mich wissen, bevor du das Modul aktualisierst und den 11410H dekodiert hast, nachdem du das Problem selbst dort aktualisiert hast.
    Also, wenn die Entwickler versuchten herauszufinden, was sie dort taten und die verbleibenden Frequenzen als erstes zu reparieren.

    Aber es ist eine Schande bei einem solchen Empfänger, dass ich solche Probleme nicht erwarten würde.
    Was wir nicht vertrauen ist, dass jemand dieses Problem löst. Mir wurde versichert, dass auf keinem Gerät, auf dem dieses Modul getestet wurde, ein Gerät getestet wurde.
    Ebenso entdeckte ich, dass das Mascom MC 2000 HD-Modul nahtlos funktioniert.
    Der Verkäufer informierte mich, dass alle DVB S2-Fernseher, auf denen dieses Modul getestet wurde, in Ordnung sind. Also ich würde nicht denken, dass die DM 900 nicht in der Lage sein wird, damit umzugehen.


    But it is a shame at such a receiver that I would not expect such problems.
    What we do not trust is that someone will solve this problem. I was assured that no device was tested on any device on which this module was tested.
    Likewise, I discovered that the Mascom MC 2000 HD Module works seamlessly.
    The vendor informed me that all the DVB S2 TVs on which this module was tested is all right. So I would not think that the DM 900 will not be able to handle it

    Ja ich muss dir die Wahrheit sagen Kostenlose Programme laufen
    Das Problem ist also nicht bei DVB-S2-Tunern, sondern bei DM mit dem Modul


    Yes I have to tell you the truth Free programs are running
    So the problem is not with DVB-S2 tuners but with DM with the module

    Also nach dem Montag-Update das Problem auch auf dem letzten TP 11410H Ich denke DM hat nicht die Symbolrate 45.000 bitte kannst du es beheben?
    Ich lege ein Foto an


    So after the Monday update the problem also on the last TP 11410H I think DM does not have the symbol rate 45,000 please can you fix it?
    I attach a photo