With the last nim change , I get a blue screen when selecting tuner config.
Picture goes black for 2 seconds and then blue screen.

crashlog is send.

I also have this issue..after 71 minutes the playback or fast forward stops and goes back to start.

that one has just been fixed (log file)

Hello,

It is asked and mentioned before, but now that the mediaplayer start to play videofiles better and better, the problem comes up more often that a PAL encoded clip or video is played or an NTSC encoded clip or video. This means then a not smooth running video when it is an NTSC clip and the tv system is set on PAL, and the same when a PAL clip or video is played and the tv system is in NTSC mode.
Is it at all possible to make the DM7025 (enigma2) switch automatic between these formats, just like the dm7000 does ?

Is it on the list "to do" or is it on the list "not possible" ?

thank you

Zitat

Original von Reichi
Don't worry, they're working on this issue (seems to be some Driver related problem).

great to hear that (not that there is a problem) but to hear the validation that there is something not 100%.

thanks

I have the dm7025 connected to a DENON receiver through an optical cable.
I still have the dropouts on the channels with ANY build or image.
I have no clue if the normal scart plug gives me good sound, because I don't use that for sound.
It is also not the receiver because my 7000,500 and 7020 do not have these issues.
But it is getting a bit annoying and it does not get fixed.

I am not pointing fingers or call names, but so many people have the same issues so it cannot be denied anymore that something is wrong or not working right somewhere.
I don't know where but someone has to know

I look forward to the fix of the hickup of sound on optical (maybe also on scart) connector.

with the new "add ability to filter by tag. they must be created by hand right now." option in the cvs the call to show the movie list ends in a enigma crash with a skin other then the default..

maybe soon a fix ?

Well my 7025 was send to DM and the mainboard was fine, it turned out to be the powersupply.
That was replaced and all was and is still fine..

Still with all my dreamboxes with optical output i have no hickups only with my dm7025 i have many of them.
it seems like a sync thing (maybe not) because it is a bit like what happens when you zap to new channel. then also a hickup is there.

It is a annoying "feature" to say the least.
Every image has this "feature".

I hope it will be fixed someday.

My DM7025 has been sent to DM because of some strange reboots that turned out to be the powersupply, they said the mainboard was 100% so that cannot be the case then.

just my thoughts.

thx for the reply..

Will hang on te 3 oct version until fixed then

NOTE: package enigma2-1.0cvs20061005-r0: task do_unpack: completed
NOTE: package enigma2-1.0cvs20061005-r0: task do_patch: started
NOTE: package enigma2-1.0cvs20061005-r0: task do_patch: completed
NOTE: package enigma2-1.0cvs20061005-r0: task do_configure: started
NOTE: package enigma2-1.0cvs20061005-r0: task do_configure: completed
NOTE: package enigma2-1.0cvs20061005-r0: task do_compile: started
ERROR: function do_compile failed
ERROR: see log in /home/dm/tuxbox-dev/dm7025/build/tmp/work/enigma2-1.0cvs20061005-r0/temp/log.do_compile.30851
NOTE: Task failed: /home/dm/tuxbox-dev/dm7025/build/tmp/work/enigma2-1.0cvs20061005-r0/temp/log.do_compile.30851
NOTE: package enigma2-1.0cvs20061005-r0: task do_compile: failed
ERROR: TaskFailed event exception, aborting
NOTE: package enigma2-1.0cvs20061005: failed
ERROR: Build of dreambox-image failed
make: *** [image] Error 1
dm@dev1:~/tuxbox-dev/dm7025$

this is in the log

Making all in SimpleRSS
make[6]: Entering directory `/home/dm/tuxbox-dev/dm7025/build/tmp/work/enigma2-1.0cvs20061005-r0/enigma2/lib/python/Plugins/Extensions/SimpleRSS'
make[6]: *** No rule to make target `all'.  Stop.
make[6]: Leaving directory `/home/dm/tuxbox-dev/dm7025/build/tmp/work/enigma2-1.0cvs20061005-r0/enigma2/lib/python/Plugins/Extensions/SimpleRSS'
make[5]: *** [all-recursive] Error 1
make[5]: Leaving directory `/home/dm/tuxbox-dev/dm7025/build/tmp/work/enigma2-1.0cvs20061005-r0/enigma2/lib/python/Plugins/Extensions'
make[4]: *** [all-recursive] Error 1
make[4]: Leaving directory `/home/dm/tuxbox-dev/dm7025/build/tmp/work/enigma2-1.0cvs20061005-r0/enigma2/lib/python/Plugins'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/home/dm/tuxbox-dev/dm7025/build/tmp/work/enigma2-1.0cvs20061005-r0/enigma2/lib/python'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/home/dm/tuxbox-dev/dm7025/build/tmp/work/enigma2-1.0cvs20061005-r0/enigma2/lib'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/dm/tuxbox-dev/dm7025/build/tmp/work/enigma2-1.0cvs20061005-r0/enigma2'
FATAL: oe_runmake failed

With current cvs build image there is no indication of 16:9 in the skin(s).
Is this not working (yet) or broken due to updates ?

Thx.

well he finally went past the point of the error..So it al looks fine again !!

building and checking now.

thx for the feedback..let you all know how it goes.

yep, did that exactly.. something very weird is going on .

many thx's for this guide.

All went well but still the same error !

NOTE: package glibc-intermediate-2.3.2+cvs20040726-r22: task do_patch: completed
NOTE: package glibc-intermediate-2.3.2+cvs20040726-r22: task do_configure: started
NOTE: package glibc-intermediate-2.3.2+cvs20040726-r22: task do_configure: completed
NOTE: package glibc-intermediate-2.3.2+cvs20040726-r22: task do_compile: started
ERROR: function do_compile failed
ERROR: see log in /home/dm/tuxbox-dev/dm7025/build/tmp/work/glibc-intermediate-2.3.2+cvs20040726-r22/temp/log.do_compile.7221
NOTE: Task failed: /home/dm/tuxbox-dev/dm7025/build/tmp/work/glibc-intermediate-2.3.2+cvs20040726-r22/temp/log.do_compile.7221
NOTE: package glibc-intermediate-2.3.2+cvs20040726-r22: task do_compile: failed
ERROR: TaskFailed event exception, aborting
NOTE: package glibc-intermediate-2.3.2+cvs20040726: failed
ERROR: Build of dreambox-image failed
dm@dev1:~/tuxbox-dev/dm7025/build$

ehmm and what are the steps for doing this ?

I have no clue where to revert the patches or how.
A short how to would help me (us) alot

I started from scratch after the error in the beginning so I have no files anymore that are mentioned in the post.

I have the same problem right now.

This is the error message :

NOTE: Using cache in '/home/dm/tuxbox-dev/dm7025/cache/oe-cache.dm'
NOTE: Parsing finished. 3838 cached, 0 parsed, 160 skipped, 28 masked.
NOTE: package glibc-intermediate-2.3.2+cvs20040726: started
NOTE: package glibc-intermediate-2.3.2+cvs20040726-r22: task do_compile: started
ERROR: function do_compile failed
ERROR: see log in /home/dm/tuxbox-dev/dm7025/build/tmp/work/glibc-intermediate-2.3.2+cvs20040726-r22/temp/log.do_compile.28917
NOTE: Task failed: /home/dm/tuxbox-dev/dm7025/build/tmp/work/glibc-intermediate-2.3.2+cvs20040726-r22/temp/log.do_compile.28917
NOTE: package glibc-intermediate-2.3.2+cvs20040726-r22: task do_compile: failed
ERROR: TaskFailed event exception, aborting
NOTE: package glibc-intermediate-2.3.2+cvs20040726: failed
ERROR: Build of dreambox-image failed
make: *** [image] Error 1
dm@dev1:~/tuxbox-dev/dm7025$

How to fix ?

So simple and it worked.

I was not sure if it was a file or directory.

Thx again !